{"title":"Großgebinde","description":"\u003ch2 id=\"speakable-headline\"\u003eGroßgebinde\u003c\/h2\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eGroßgebinde\u003c\/strong\u003e: Großgebinde bündeln Verbrauchsmittel für regelmäßige Arbeiten. Entscheidend sind der tatsächliche Verbrauch, die vorgesehene Dosierung und eine passende Entnahmehilfe.\u003c\/p\u003e\n\u003cp\u003eDas größere Gebinde verändert die Rezeptur nicht; Konzentrate und gebrauchsfertige Mittel müssen deshalb getrennt verglichen werden.\u003c\/p\u003e","products":[{"product_id":"koch-chemie-green-star-gs-universalreiniger","title":"Green Star \"Gs\" Universal Cleaner","description":"\u003ch2 id=\"speakable-headline\"\u003eWorkshop chemistry for engine bay, floor and lift with Koch-Chemie Green Star\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Green Star? A high-alkaline APC concentrate at pH 13 that lifts oil, grease and lubricants off workshop floors, out of the engine bay and off the lift in one pass. Not for pH-neutral coatings, synthetic-leather dashboards or anodised aluminium parts without a test patch first.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003eThe \u003cstrong\u003eKoch-Chemie Green Star Universal Cleaner\u003c\/strong\u003e works through a mix of surfactants, alkaline builders and corrosion inhibitors. With a pH between 12.5 and 13 it saponifies organic dirt — oil, grease, wax — turning it into soap compounds you can rinse off.\u003c\/p\u003e\n\n\u003cp\u003eThe surfactant shell then holds the loosened dirt in suspension so it doesn't dry back onto the panel when you rinse. That's why Green Star is the go-to APC in plenty of workshops and detailing shops that want a single cleaner for the engine bay, the lift, the workshop floor and exterior plastics — not because it's the best at any one of them, but because it hits the right balance between cleaning punch and material safety across that whole bracket.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-green-star-gs-universalreiniger_hero.png?v=1775995591\" alt=\"Koch-Chemie Green Star Gs bottle and canister on a concrete wall in front of a white Ferrari 296 GTB\" loading=\"lazy\" width=\"1200\"\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne chemistry, four dilutions.\u003c\/strong\u003e The mix ratio decides the job: 1:5 for the workshop floor and heavily oiled engine bays, 1:10 as a wheel pre-cleaner and bug remover, 1:20 for exterior plastics and rubber care, 1:50 for routine maintenance cleans in the customer reception. An 11-kilo canister replaces three separate cleaners for roughly six months in a two-lift shop.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhosphate- and solvent-free, with a corrosion inhibitor.\u003c\/strong\u003e The formula skips NTA, phosphates and solvents and carries an aluminium corrosion inhibitor. That's why you can lay Green Star down on painted aluminium, steel and most plastics without worrying — but only when you respect the dilution. Used neat the inhibitor stops being protection and starts being a softening zone, especially on anodised aluminium.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOil-carrying capacity right into the pore structure.\u003c\/strong\u003e On a one-year-old workshop floor with lube and gear oil soaked in, 1:5 Green Star pulls the top layer of dirt fully after three minutes of dwell — and brings part of the oil sitting in the concrete pores back to the surface. A second pass lifts the residual dirt that was still in the pore bed. You won't get there mechanically with a pH-neutral interior cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Never hit warm or sun-heated surfaces — once an engine block is past about 40 °C the alkaline solution flashes off and leaves water marks and limescale rings on painted covers. Engine-bay sequence: let the vehicle cool, mask intake and electronics, work bottom-up at 1:10, give it three minutes max, then rinse generously with a soft jet from the \u003ca href=\"\/collections\/universalreiniger\"\u003euniversal cleaner\u003c\/a\u003e group. For repeat jobs grab a foam sprayer — it lays the 1:10 solution down more evenly than any hand pump and buys you 40 to 60 extra seconds of dwell on vertical surfaces.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e1 to 5. 1 to 20. One canister, four jobs.\u003c\/h3\u003e\n\u003cp\u003eWith the Koch-Chemie Green Star Universal Cleaner the cleaning power isn't in the bottle, it's in the mix ratio. Skip the difference and you'll either clean too soft or wreck the material.\u003c\/p\u003e\n\n\u003cp\u003eFor the workshop floor you mix 1:5 in warm water, lay it down with a scrubber or single-disc machine, give it three minutes and pick it up with a wet vac. For the lift and the engine bay 1:10 is the safe standard: it lifts oil reliably without going at rubber steering boots or wiring-loom sheaths. For exterior plastics, trim and badly soiled wheel arches 1:20 is enough. The 1:50 dilution is for routine maintenance cleans in customer reception or on tiled floors — at that point you're past \"APC\" and into a mild alkaline cleaner with residual grease-cutting power.\u003c\/p\u003e\n\n\u003cp\u003eThe mistake shops almost always make with Green Star is the same one: too strong a mix, because \"stronger is better\" is stuck in the head. In practice 1:5 on an engine block gives you no measurable edge over 1:10 — what you get instead is higher chemical burn and the risk of overloading the corrosion inhibitor on aluminium. The real lever is dwell time: three minutes instead of two. Two passes instead of one. Never crank the concentration if the first pass came up short.\u003c\/p\u003e\n\n\u003cp\u003eTwo practical dosing workflows hold up day to day. Workflow one: canister straight onto a dosing station at the water tap, ratio set through the Venturi nozzle, application by foam sprayer or pressure sprayer. Workflow two for smaller shops: two labelled 500-millilitre spray bottles, one with the 1:10 mix for engine bay and wheel arch, one with 1:20 for exterior plastics. Mix both fresh every day — alkaline working solutions lose cleaning power inside 24 hours because CO₂ from the air slowly drops the pH.\u003c\/p\u003e\n\n\u003cp\u003eAn 11-kilo canister at a properly mixed 1:10 covers about 110 litres of working solution — that's roughly 40 engine-bay cleans or 15 workshop-floor passes over 100 square metres. For shops running two lifts and regular detailing the 22-kilo or 225-kilo drum pays off from three cleans a week, purely on the per-kilo price difference.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-green-star-gs-universalreiniger_closeup.png?v=1775995596\" alt=\"Koch-Chemie Green Star Gs label close-up with the pH 12.5 marking visible\" loading=\"lazy\" width=\"1200\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAlkaline. But not for everything.\u003c\/h3\u003e\n\u003cp\u003eThe Koch-Chemie Green Star Universal Cleaner has workshop DNA — it's not the right chemistry for delicate interior or coating surfaces.\u003c\/p\u003e\n\n\u003cp\u003eIt punches above its weight wherever organic dirt dominates: engine oil, gear oil, grease mist in the bay, soot on the workshop floor, brake-dust\/grease mixes in the wheel arches, road grime on commercial-vehicle frames. Bugs and bird droppings also soak off well with the 1:10 dilution before the actual wash. The alkaline pH saponifies the protein and turns a baked-on crust into a layer you can pull off — exactly where pH-neutral products would need you to scrub.\u003c\/p\u003e\n\n\u003cp\u003eWhere Green Star runs out of road is where the pH becomes the problem. On ceramic-coated paint every pass shaves a bit off the top bonding layer of the coating — for coating-sealed cars a pH-neutral shampoo or the Koch-Chemie \u003ca href=\"\/products\/koch-chemie-mehrzweckreiniger-mzr-universalreiniger\"\u003eMultipurpose Cleaner \"Mzr\"\u003c\/a\u003e is the call.\u003c\/p\u003e\n\n\u003cp\u003eAnodised aluminium, matte aluminium and polished metal you never treat neat and you always patch-test in a hidden spot first. The corrosion inhibitor protects painted aluminium reliably, but on anodised surfaces it starts to struggle. Same goes for non-anodised magnesium rims and race parts — the alkaline side bites into the surface as soon as you push the dwell past two minutes.\u003c\/p\u003e\n\n\u003cp\u003eInside the cabin Green Star is plainly too aggressive: synthetic leather, Alcantara and coated dashboards don't take alkaline concentrates long-term, not even at 1:50. If you want one cleaner for both workshop and interior, that's a different chemistry.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-green-star-gs-universalreiniger_ergebnis.png?v=1775995602\" alt=\"Freshly cleaned Ferrari engine bay after a Koch-Chemie Green Star pass\" loading=\"lazy\" width=\"1200\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eGreen Star, Gs9 or Mzr. Your decision tree.\u003c\/h3\u003e\n\u003cp\u003eKoch-Chemie has three universal cleaners with overlapping use cases — the choice isn't about price, it's about what you're cleaning.\u003c\/p\u003e\n\n\u003cp\u003eThe classic Green Star is the workshop pick: hard-alkaline, high oil-carrying capacity, built for tough exterior and underbody work. The \u003ca href=\"\/products\/koch-chemie-green-star-96-gs9-universalreiniger\"\u003eGreen Star 96 \"Gs9\"\u003c\/a\u003e is the milder follow-up with an optimised surfactant base and lower environmental load — it doesn't replace the classic Gs, it sits alongside it for detailers who work more often on private-customer cars with coatings and less on commercial frames. The Multipurpose Cleaner \"Mzr\" runs on completely different chemistry: weakly alkaline through to pH-neutral, built for interior, dashboards, carpets and upholstery. Gs cleans the engine bay, Mzr cleans the seats after.\u003c\/p\u003e\n\n\u003cp\u003ePractical rule for the buy decision: if the focus is the lift, the engine bay, the workshop floor and commercial-vehicle work, grab the classic Green Star in 11 or 22 kilos. If you mostly detail private-customer cars with ceramic protection and need the APC for wheel arches, bug removal and exterior plastics, the Gs9 is the cleaner fit. If you're after a cleaner for interior, carpet and upholstery, neither Gs nor Gs9 is the right answer — that's where the Mzr lives.\u003c\/p\u003e\n\n\u003cp\u003eFor the typical one-man detailer with a mixed customer base, the 11-kilo Green Star plus a 1-litre Mzr covers most of the actual workload: Gs for the whole exterior, the engine bay and floor cleans, Mzr for the interior. If you've got three separate APCs on the shelf — workshop cleaner, wheel cleaner, interior cleaner — this two-product setup halves the chemical cabinet and still cleans tighter.\u003c\/p\u003e\n\n\u003cp\u003ePack size tracks monthly throughput. The 1000-millilitre spray head is for the home detailer and the first test drive, not a working shop. From one vehicle a week with a proper exterior wash the 5-litre canister pays off; from three vehicles the 11-kilo container. 22 and 225 kilos belong in shops with a dosing station and steady commercial-vehicle work — for smaller outfits they're an unnecessary lock-in to one chemistry and harder to handle.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-green-star-gs-universalreiniger_detail.png?v=1775995607\" alt=\"Green Star working solution on the black plastic wheel arch of the Ferrari\" loading=\"lazy\" width=\"1200\"\u003e\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":48494630109519,"sku":"D1-KCX-291001","price":6.99,"currency_code":"EUR","in_stock":true},{"title":"2x 1000ml","offer_id":48725287960911,"sku":"D1-KCX-68037_2","price":13.7,"currency_code":"EUR","in_stock":true},{"title":"3x 1000ml","offer_id":48725287993679,"sku":"D1-KCX-68037_3","price":20.34,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":48762352468303,"sku":"D1-KCX-291005","price":29.99,"currency_code":"EUR","in_stock":true},{"title":"11kg","offer_id":48494630142287,"sku":"D1-KCX-291011","price":56.49,"currency_code":"EUR","in_stock":true},{"title":"22kg","offer_id":49094546522447,"sku":"D1-KCX-291022","price":107.49,"currency_code":"EUR","in_stock":true},{"title":"225kg","offer_id":49094546555215,"sku":"D1-KCX-291225","price":1134.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-green-star-universalreiniger.jpg?v=1710769279"},{"product_id":"koch-chemie-gentle-snow-foam-gsf-reinigungsschaum","title":"Gentle Snow Foam \"Gsf\" Cleaning Foam","description":"\u003ch2 id=\"speakable-headline\"\u003epH-neutral pre-wash with the Koch-Chemie Gentle Snow Foam\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Gentle Snow Foam? A pH-neutral cleaning foam for the touchless pre-wash that lays down a thick foam with long dwell time on the paint — safe on wax and sealants. Not the call for baked-on bugs or tar, that's what active cleaners are for.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Gentle Snow Foam\u003c\/strong\u003e is a pH-neutral pre-wash foam from Koch-Chemie in Unna that works at a pH of around 7.5 and goes on with a foam lance or foam sprayer. The thick foam blanket gently softens loose road grime and pollen before the hand wash — without attacking wax layers or ceramic coatings. That makes the Gsf the go-to for weekly care.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-gentle-snow-foam-gsf-reinigungsschaum_hero.png?v=1778625650\" alt=\"Koch-Chemie Gentle Snow Foam Gsf – pre-wash on a black Porsche 911 Turbo S in the detailing hall\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003epH-neutral at around 7.5.\u003c\/strong\u003e Won't touch carnauba wax, polymer or ceramic sealants. You can run the Gsf every week without losing dwell time on a GYEON Q² MOHS or Koch-Chemie 1K Nano — unlike active foams at pH 11 or higher.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eThick foam blanket with long dwell time.\u003c\/strong\u003e At 1:50 in the foam lance you get a creamy foam that clings to vertical panels for 4–6 minutes instead of sheeting straight off. That dwell time is enough to grab the loose particles and pull them off when you rinse — the whole point of a pre-wash.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eGoes a long way and pulls double duty.\u003c\/strong\u003e At 20 ml per litre, 1 litre covers about 50 pre-washes — roughly €0,26 a go. You can also run it as a hand-wash shampoo: 50 ml in 10 litres of water in the bucket, done.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Foam consistency lives and dies by how much water is in the lance, not how much product. Tip more Gsf in but skimp on water and you get thin foam instead of a creamy blanket. Rule of thumb: fill the mixing bottle two-thirds with warm water, then dose 20 ml per litre. With soft water under 8 °dH bump the dose up a touch; with hard water from 14 °dH ease off — otherwise you end up with stringy foam that's a pain to rinse.\u003c\/p\u003e\n\n  \u003cp\u003eAnd always work onto wet, pre-rinsed paint. Dry paint means the foam grinds loose grit into the surface — the most common beginner mistake.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFoam lance, 20 ml, let the foam sheet off\u003c\/h3\u003e\n\u003cp\u003eYou lay the Gsf down on a wet, pre-rinsed car — never on dry paint, or you'll drag loose grit across the surface when you rinse. Knock the heavy dirt, bugs and bird muck off with the pressure washer first. A quick clear-water rinse beforehand takes 30 seconds and saves the clear coat from needless swirls.\u003c\/p\u003e\n\n\u003cp\u003eInto the foam lance goes 20 ml of Gsf per litre of water, which is about 1:50. Lay the foam on bottom to top so the run-off doesn't draw clean streaks through the dirt. Let it dwell 4–6 minutes, shorter in the sun — the foam mustn't dry on, or it'll leave streaks.\u003c\/p\u003e\n\n\u003cp\u003eThen rinse top to bottom thoroughly with clear water. Foam left in the panel gaps points to too little water pressure or too short a rinse. Whatever's still on the paint after that belongs to the \u003ca href=\"\/collections\/autoshampoo\"\u003ecar shampoo\u003c\/a\u003e step of the two-bucket wash. The pre-wash doesn't replace the shampoo, it just cuts down how much grit ends up in your wash mitt.\u003c\/p\u003e\n\n\u003cp\u003eIf you haven't got a foam lance on the pressure washer, you can put the Gsf on with a pump sprayer instead — the foam comes out a lot flatter there and doesn't last as long. For a manual bucket wash, dose 50 ml in 10 litres of water, about two pumps from a trigger bottle. That's comfortably enough foam for a mid-size car, anything from a Golf up to an E-Class.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-gentle-snow-foam-gsf-reinigungsschaum_anwendung.png?v=1778625656\" alt=\"Koch-Chemie Gentle Snow Foam Gsf – foam lance spraying thick cleaning foam onto the 911 Turbo S\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003epH-neutral means your coating stays put\u003c\/h3\u003e\n\u003cp\u003eThe biggest difference from active pre-wash foams like the \u003ca href=\"\/products\/koch-chemie-green-star-universalreiniger\"\u003eKoch-Chemie Green Star\u003c\/a\u003e is the pH. Gsf sits at 7.5, Green Star at around 11. On uncoated paint that doesn't matter; on a ceramic coating it does.\u003c\/p\u003e\n\n\u003cp\u003eStudies and hands-on testing show it: strongly alkaline cleaners above pH 10 break down the topcoat of ceramic coatings measurably faster. If you want to get 12 or 24 months of life out of your coating, you're better off with a pH-neutral weekly wash. The Gsf is built for exactly that — ongoing care instead of a one-off deep clean. The coating's hydrophobic effect stays intact, and the water beads after the wash just like it did on day one.\u003c\/p\u003e\n\n\u003cp\u003eWhere the Gsf hits its limits: baked-on bugs on the front end, tar spots on the sills, brake dust on the wheels or hardened pollen — it won't shift those. For that you reach for the specialists — \u003ca href=\"\/collections\/insektenentferner\"\u003ebug remover\u003c\/a\u003e, tar remover or wheel cleaner.\u003c\/p\u003e\n\n\u003cp\u003eIf the car's really dirty and you want to turn the Gsf into an active foam, add 10–30 ml of Green Star per litre of mixed foam in the lance. That pushes the pH up and gives the foam more bite — but on coated cars only as the exception, not the weekly routine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-gentle-snow-foam-gsf-reinigungsschaum_ergebnis.png?v=1778625662\" alt=\"Koch-Chemie Gentle Snow Foam Gsf – water beading on a freshly washed bonnet\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFor coated cars, and honest limits\u003c\/h3\u003e\n\u003cp\u003eThe Gsf suits anyone who washes on a routine and runs a coated or waxed car. The logic is simple: clean gently and often rather than aggressively and rarely. If you make the wash a fixed weekly habit, the Gsf takes you furthest.\u003c\/p\u003e\n\n\u003cp\u003eIt's less of a fit for body shops, seasonal cars coming off a long lay-up, or the spring clean after winter — there active foams with a higher pH have the edge, because the dirt is long past what the Gsf can dissolve. And if you don't own a foam lance and only run a pressure sprayer, the Gsf will give you foam, but never the consistency and dwell time of a proper lance on a pressure washer. For that case a spray-on pre-cleaner makes more sense.\u003c\/p\u003e\n\n\u003cp\u003eThe 1-litre bottle covers around 50 washes, the 5-litre can 250. If you look after more than one car or work in a detailing studio, the 5-litre container runs about 30 percent cheaper per wash. Pair it with a pH-neutral shampoo like the Koch-Chemie Nanomagic Shampoo or GYEON Q² Bathe+ for the two-bucket wash, and a drying towel to finish, and you've got the full weekly workflow for a well-kept car — from the first jet of water to the last drop, without ever attacking your coating.\u003c\/p\u003e\n\n\u003cp\u003eThe signature cherry scent is a matter of taste, but it rarely divides opinion — most detailers find it a lot more pleasant than the soapy standard smell of many competitor products. In closed garages or wash bays the smell doesn't linger after rinsing, which is a handy detail in day-to-day use.\u003c\/p\u003e\n\n\u003cp\u003eFirst time you run the Gsf, don't be stingy with the dose. 20 ml per litre is the floor for a visible foam blanket. On really dirty cars or with hard tap water, go a pump higher. The extra 4–5 cents a wash is nothing next to a weaker result.\u003c\/p\u003e\n\n\u003cp\u003eSame goes for the water pressure at the washer: under 100 bar the foam stays thin; from 130 bar it turns creamy and sits thick on the paint. Running a Kärcher K7 or similar, you can crank the lance to maximum foam output. With portable battery washers the foam comes out noticeably flatter — not a product fault, just a question of pressure.\u003c\/p\u003e\n\n\u003cp\u003eOne more tip from what we see at Detailing1: before each seasonal wash in spring and autumn, swap the Gsf for an active-foam wash with Green Star. That way no pollen film and no winter salt gets a foothold — the kind the pH-neutral foam can't shift over time. The other 50 weeks of the year, the Gsf runs as your standard.\u003c\/p\u003e\n\n\u003cp\u003eStick to that routine properly and even a 5-year-old coating still beads visibly — and that's exactly the point of pH-neutral care: keeping what you've got instead of constantly re-applying the coating. The pricier line in any detailing budget is always the coating itself, not the shampoo. With the Gsf you stretch the life of the coating — at minimal running cost and maximum compatibility.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-gentle-snow-foam-gsf-reinigungsschaum_lineup_71190d38-c132-4a2c-b491-318ab5c6d172.png?v=1778657758\" alt=\"Koch-Chemie Gentle Snow Foam Gsf – 1000 ml bottle and 5 L canister side by side\" loading=\"lazy\"\u003e\u003c\/p\u003e\n","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":48494571192655,"sku":"D1-KCX-383001","price":13.49,"currency_code":"EUR","in_stock":true},{"title":"2x 1000ml","offer_id":49672693842255,"sku":"D1-KCX-383001_2","price":29.38,"currency_code":"EUR","in_stock":true},{"title":"3x 1000ml","offer_id":49672693875023,"sku":"D1-KCX-383001_3","price":43.62,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":48494571225423,"sku":"D1-KCX-383005","price":55.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-gentle-snow-foam-gsf-reinigungsschaum_bef958d2-c483-4332-ab33-56ecc2f968ac.png?v=1778623445"},{"product_id":"koch-chemie-finish-spray-exterior-fse-quick-detailer-kalk-ex","title":"Finish Spray Exterior \"Fse\" Quick Detailer with Kalk-EX","description":"\u003ch2 id=\"speakable-headline\"\u003eDissolving limescale chemically with the Koch-Chemie FSE\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie FSE? A quick detailer with an acidic Kalk-EX formula (pH 2.5) that dissolves limescale, water spots and mineral residue on paint, glass and plastic in a single step while sealing at the same time with a polymer wax. Not suitable for vehicles with an active ceramic coating or fresh wax protection.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie FSE\u003c\/strong\u003e (Finish Spray Exterior) is a quick detailer from Koch-Chemie with a built-in Kalk-EX formula that chemically dissolves mineral deposits such as limescale, water spots and stubborn mineral residue on every exterior surface. The acidic formula at pH 2.5 neutralises alkaline lime compounds through a direct acid-base reaction, while an included polymer wax leaves gloss and a light protective film behind at the same time — both in one single pass on paint, glass and plastic.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-finish-spray-exterior-fse-quick-detailer-kalk-ex_hero.png?v=1776464165\" alt=\"Koch-Chemie FSE Finish Spray Exterior quick detailer with Kalk-EX\" loading=\"lazy\" width=\"1200\" height=\"900\"\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKalk-EX dissolves mineral deposits chemically.\u003c\/strong\u003e The pH value of 2.5 neutralises alkaline lime — limescale lets go without any mechanical scrubbing. 30–60 seconds of dwell time on stubborn spots is enough before you go in with the microfibre cloth. A plain wipe with no acidic component just moves the lime around; the FSE actually dissolves it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree jobs, one step.\u003c\/strong\u003e The Koch-Chemie FSE cleans, conditions and protects all at once. The included polymer wax leaves a streak-free high gloss with a light protective film once you've buffed it off, slowing down fresh dirt for a while. No separate wax finish needed — the job is done the moment the second cloth runs dry across the panel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks across exterior surfaces — with one clear limit.\u003c\/strong\u003e Paint, glass and exterior plastic all take the FSE without trouble. Don't use it on acid-sensitive materials such as certain matte paints, on freshly waxed or ceramic-coated vehicles, or on surfaces that have been sitting in direct sun. Check the temperature before you start.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Using FSE after waxing is the most common mistake. The pH of 2.5 doesn't only dissolve lime — it also eats into waxes and polymer sealants. Right order: apply FSE on the lime spots first, buff dry, then wax or sealant. Run the FSE as your everyday quick detailer on freshly sealed paint and you're actively stripping your LSP. Hardly any shop tells you that.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eUsing the Koch-Chemie FSE on a cool surface\u003c\/h3\u003e\n\u003cp\u003eThe Koch-Chemie Finish Spray Exterior only works reliably on cool, dry surfaces. On hot metal after direct sun the spray flashes off too quickly and leaves residue instead of removing it. Pull the car into the shade first and give it five minutes. If the surface still feels clearly warm to the touch, don't start yet.\u003c\/p\u003e\n\n\u003cp\u003eSpray it straight onto the surface or into the microfibre cloth — 2–3 pulls per panel either way. The FSE ships without a trigger head; a pressure sprayer like the Canyon CHS-3AN (available as a bundle option) makes the application more even and stops you over-dosing. Work it in with a soft \u003ca href=\"\/collections\/mikrofasertuecher\"\u003emicrofibre cloth\u003c\/a\u003e and buff off with a dry second cloth. The two-cloth method keeps streaks away, because the first cloth picks up dirt and lime while the second one only buffs.\u003c\/p\u003e\n\n\u003cp\u003eOn stubborn limescale on glass, let it dwell for 30–60 seconds before you buff. On paint, working it straight in without extra wait time is enough. Glass benefits the most: the FSE pulls water spots off your windows that pH-neutral quick detailers can't shift. Ordinary sprays only move the lime around visually — the acidic Kalk-EX formula breaks the mineral bond down chemically. On the rear window and side glass the method works exactly as it does on the windscreen.\u003c\/p\u003e\n\n\u003cp\u003eIf you wash in regions with very hard water, you know the problem: even after careful drying, fine lime residue stays behind. That's when the FSE belongs straight into your routine after drying off — one shot onto the still slightly damp cloth covers whole panels. That stops lime from baking in and having to be removed the hard way later. On black and dark paint you spot lime residue instantly — that's where it pays to do it after every wash.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-finish-spray-exterior-fse-quick-detailer-kalk-ex_anwendung.png?v=1776464226\" alt=\"Koch-Chemie FSE applied to car paint with a microfibre cloth\" loading=\"lazy\" width=\"1200\" height=\"900\"\u003e\n\n\u003ch3\u003eIt dissolves lime. Your coating too.\u003c\/h3\u003e\n\u003cp\u003eOn vehicles with no active protective sealant, the Koch-Chemie FSE quick detailer is the right product: it dissolves limescale, water spots and mineral deposits on unsealed paint, glass and plastic and leaves gloss behind. That's its strong suit and the reason detailers and detailing shops keep it close.\u003c\/p\u003e\n\n\u003cp\u003eOn vehicles with a ceramic coating or a long-life nano coating it's a different story. The pH of 2.5 can attack the cross-link structure of SiO₂-based coatings and cut their lifespan right down. If you're looking after an active ceramic coating, reach for a pH-neutral \u003ca href=\"\/collections\/quick-detailer\"\u003ecoating-safe quick detailer\u003c\/a\u003e instead. If you only have wax protection or no sealant at all: the FSE is the faster and more effective answer than a pH-neutral spray that doesn't dissolve lime but only moves it around.\u003c\/p\u003e\n\n\u003cp\u003eTwo more limits of the FSE: tar, bitumen spots and bug splatter don't react to acidic chemistry — for those you need a solvent-based product. And on baked-in limescale that has already etched into the clear coat, the FSE hits its ceiling.\u003c\/p\u003e\n\n\u003cp\u003eIt dissolves fresh mineral deposits reliably, but not paint damage from lime that has been left to sit too long. In that case you need a light polish first to fix the damage. After that the FSE protects reliably against new deposits during ongoing maintenance.\u003c\/p\u003e\n\n\u003cp\u003eIf you're not sure whether your car has a sealant: water beading on the paint after rain is a good sign of an active LSP. In that case work with a pH-neutral quick detailer and use the FSE only on lime spots on glass or plastic, where coatings are rarely applied.\u003c\/p\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e“Great product. Been using it for years.”\n  \u003cbr\u003e\u003csmall\u003e— Verified buyer, Trusted Shops\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-finish-spray-exterior-fse-quick-detailer-kalk-ex_ergebnis.png?v=1776464298\" alt=\"Koch-Chemie FSE result limescale removed high gloss\" loading=\"lazy\" width=\"1200\" height=\"900\"\u003e\n\n\u003ch3\u003eFSE for paint without an active sealant\u003c\/h3\u003e\n\u003cp\u003eThe Koch-Chemie FSE suits the everyday driver who keeps fighting limescale, runs no ceramic coating and wants a quick detailer that genuinely dissolves lime. If you live in a region with very hard water and wash your car yourself a lot, you'll find in the FSE a tool that pH-neutral quick detailers simply can't replace.\u003c\/p\u003e\n\n\u003cp\u003eIn a detailing business the FSE is a classic for the final wipe-down after a full detail: sprayed on fast, buffed off straight away, high gloss done. The 10-litre and 200-litre containers make cost-effective bulk use possible. At a normal dose of 2–3 pulls per panel, 1 litre covers around 40–60 applications on a mid-size car — that works out to well under 30 cents per application. For shops detailing 10 to 20 cars a day, the 200-litre drum is the most economical option.\u003c\/p\u003e\n\n\u003cp\u003eThe FSE is less suited to vehicle owners with a ceramic coating or fresh wax protection who want a general-purpose care quick detailer. And anyone who mainly needs to remove tar or bug splatter comes up empty here too — the FSE isn't an all-purpose cleaner, it's a lime specialist with a conditioning effect.\u003c\/p\u003e\n\n\u003cp\u003eTo round out the lime workflow we suggest a top-up wax or a \u003ca href=\"\/collections\/spruhversiegelung\"\u003espray sealant\u003c\/a\u003e after the FSE pass, if the car has no active LSP. The FSE cleans and leaves a light polymer protection behind, but it doesn't replace a full seal. If you want more durability after the lime treatment, finish the workflow with a spray sealant — the surface is then not just lime-free but protected too.\u003c\/p\u003e\n\n\u003cp\u003eThe Detailing1 insight: plenty of quick detailers promise limescale removal but only deliver a pH-neutral gloss film that visually masks the lime. The FSE is one of the few quick detailers on the German market that uses real acid-base chemistry at pH 2.5 to remove lime. The difference is visible: on heavily limed-up glass the FSE dissolves water spots in one pass that other sprays need three or four goes at. That's not a marketing claim, it's chemistry.\u003c\/p\u003e\n\n\u003cp\u003eIf you're choosing between the Koch-Chemie FSE and the \u003ca href=\"\/products\/koch-chemie-quick-finish-qf-quick-detailer\"\u003eKoch-Chemie Quick Finish QF\u003c\/a\u003e: the QF is pH-neutral and coating-safe, made for vehicles with active protection. The FSE is the right pick when limescale is the main problem and there's no active coating. Lime: FSE. Coating: QF. Both products have their place — it's about the right job, not the better product.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-finish-spray-exterior-fse-quick-detailer-kalk-ex_lineup.png?v=1776464385\" alt=\"Koch-Chemie FSE all sizes 1L 10L variant overview\" loading=\"lazy\" width=\"1200\" height=\"900\"\u003e\n","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":48484526817615,"sku":"D1-KCX-285001","price":11.99,"currency_code":"EUR","in_stock":true},{"title":"1 liter + Canyon spray head CHS-3AN","offer_id":49062963347791,"sku":"D1-KCX-68549+CHS-3AN","price":15.82,"currency_code":"EUR","in_stock":true},{"title":"2x 1000ml","offer_id":49671582056783,"sku":"D1-KCX-285001_2","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"3x 1000ml","offer_id":49671582089551,"sku":"D1-KCX-285001_3","price":34.89,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48484526850383,"sku":"D1-KCX-285010","price":100.49,"currency_code":"EUR","in_stock":true},{"title":"200 liters","offer_id":49602838397263,"sku":"D1-KCX-285200","price":2020.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-finish-spray-exterior-fse-quick-detailer-kalk-ex.jpg?v=1710627039"},{"product_id":"koch-chemie-magic-wheel-cleaner-mwc-felgenreiniger","title":"Magic Wheel Cleaner \"Mwc\" Wheel Cleaner","description":"\u003ch2 id=\"speakable-headline\"\u003eDissolve brake dust chemically on polished wheels\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Magic Wheel Cleaner? An acid-free, viscous wheel cleaner from Koch-Chemie's workshop line that visibly dissolves brake dust and flash rust chemically via a red-violet colour change. Works on alloy painted, alloy polished, chrome and steel. Not for baked-on tar or bitumen spots.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eThe Koch-Chemie Magic Wheel Cleaner\u003c\/strong\u003e — usually just called \"MWC\" in-house — is an acid-free wheel cleaner from Koch-Chemie's workshop line. The active ingredient ammonium mercaptoacetate, a salt of thioglycolic acid, reacts with the iron(III) compounds in brake dust and lifts them off the wheel surface as a red-violet complex. The colour change isn't a marketing gimmick but the chemical reaction itself: where you see violet, iron is being converted right then and there. With a pH of 5–6 the formula stays gentle on painted and polished alloy wheels, chrome and steel. The high viscosity of 50 mPa·s means the product clings to vertical wheel faces instead of running straight off — so you get the full dwell time on the surface.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRed-violet colour change as a reaction indicator.\u003c\/strong\u003e No guessing how long to wait. You see in real time where iron particles are reacting and when the reaction is done. That kills two classic mistakes: rinsing too early (cleaning unfinished) and leaving it on too long (product saturates and dries on).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSyrup-like viscosity for vertical cling.\u003c\/strong\u003e At 50 mPa·s the Magic Wheel Cleaner is thick enough to stay in the spokes and on the wheel flank without dripping straight to the ground. That sets it apart from watery wheel cleaners where half the product would run off unused.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne cleaner for your whole wheel collection.\u003c\/strong\u003e Alloy painted, alloy polished, chrome and steel — the pH of 5–6 is mild enough to use even on high-gloss polished forged wheels. On anodised or matte-coated wheels, test on a hidden spot first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Always spray onto a cold, dry wheel — never in direct sun, never onto warm brakes after a drive. Warm surfaces let the gel dry on, and that leaves residue you then have to brush off. On heavily soiled wheels after months without cleaning, two short passes beat one long one: the active ingredient is chemically saturated after about 5 minutes. Just let it dwell twice for 3 minutes each and rinse in between.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCold wheel. Spray. Wait 2 to 5 minutes.\u003c\/h3\u003e\n\u003cp\u003eSpray the Magic Wheel Cleaner onto the cold, dry wheel — cover spokes, barrel, the rim edge and the wheel bolts evenly. Thanks to the syrup-like consistency the product clings vertically without you having to change how you work. Best to work bottom to top so you don't cover faces you've already wetted.\u003c\/p\u003e\n\n\u003cp\u003eAfter 30 to 60 seconds the colour change kicks in: first on spots with a lot of brake dust, then across the whole face. Red-violet streaks show you exactly where iron particles are being converted. After 2 to 5 minutes' dwell time the reaction is done — waiting longer gets you nothing, because the active ingredient is saturated after about 5 minutes. A common mistake is leaving the product on for 10 minutes hoping for better results. The opposite happens: the solution starts to dry on and leaves streaks.\u003c\/p\u003e\n\n\u003cp\u003eFinish by rinsing off with a strong jet of water from the pressure washer or garden hose, top to bottom. With heavy brake dust between tight spokes a \u003ca href=\"\/collections\/zubehoer-felgenpflege\"\u003ewheel brush\u003c\/a\u003e can help spread the dissolved material — but not for scrubbing, just for touch-up. If you clean weekly to fortnightly, one pass usually does the job.\u003c\/p\u003e\n\n\u003cp\u003eA note on dosing: 500 ml lasts for about 10 full vehicle cleans. Per wheel, 40 to 50 ml is plenty. That works out to EUR 1.25 per full application — far more economical than the bottle price suggests, once you weigh it against the time spent mechanically scrubbing with less effective cleaners.\u003c\/p\u003e\n\n\u003ch3\u003eIt dissolves iron particles. Not tar.\u003c\/h3\u003e\n\u003cp\u003eThe Magic Wheel Cleaner is built precisely for one job: dissolving brake dust and flash rust chemically. The reaction between ammonium mercaptoacetate and the iron(III) ions in brake dust is the mechanism — anything that isn't iron doesn't get touched. That explains the colour change as a diagnostic tool: no colour means no iron, and no effect in that case isn't a shortfall of the product but the right answer to the dirt.\u003c\/p\u003e\n\n\u003cp\u003eAs a secondary use, the Magic Wheel Cleaner also works on paint as a flash-rust remover — especially handy on vehicles parked under industrial fallout or next to railway tracks. Fine iron particles settle there on the clear coat and react with the MWC formula just like they do on the wheel. Used before polishing, it boosts the adhesion of any following wax or ceramic coating, because the paint surface is genuinely contamination-free.\u003c\/p\u003e\n\n\u003cp\u003eWhere the MWC isn't the right product: baked-on tar, bitumen spots and oily soiling don't react with thioglycolate salts. For that you need a solvent-based tar remover. On badly neglected wheels with months-old brake dust that has worked its way into the pores, the stronger \u003ca href=\"\/products\/koch-chemie-reactive-wheel-cleaner-rwc\"\u003eKoch-Chemie Reactive Wheel Cleaner\u003c\/a\u003e can be the better call — its acid system is more powerful, though not suited to every wheel material. The choice is clear: when safety on chrome and polished wheels matters, MWC. When you need maximum cleaning power and you're working with alloy painted and steel, RWC.\u003c\/p\u003e\n\n\u003cp\u003eA second case where no wheel cleaner in the world will help anymore: when the wheel is already visibly corroded or the clear coat has flaked off. At that point cleaning isn't the issue anymore — paint refurbishment is. The Magic Wheel Cleaner is a care product, not a restoration product.\u003c\/p\u003e\n\n\u003ch3\u003eYour standard for the regular wheel workflow\u003c\/h3\u003e\n\u003cp\u003eThe Magic Wheel Cleaner is the right call for anyone who keeps their wheels on a regular schedule and wants a product where they don't have to think about material compatibility. One product, one step, all wheels done. That's workshop logic — and that's exactly what the MWC is formulated for.\u003c\/p\u003e\n\n\u003cp\u003eIt really plays its strengths when you look after several vehicles with different wheel types or work on a fleet. Instead of three cleaners for three wheel types, one does it. It's weaker on extremely baked-on brake-dust residue from high-performance brake setups, or on wheels that haven't been cleaned for months. In both cases a second pass or a more aggressive product makes more sense than extending the dwell time.\u003c\/p\u003e\n\n\u003cp\u003eAs a complete solution the Magic Wheel Cleaner works best paired with a \u003ca href=\"\/collections\/vorreinigung\"\u003epre-cleaner\u003c\/a\u003e like Koch-Chemie Vorreiniger B, applied as foam over the whole wheel before the MWC goes into the spokes. Finish with a \u003ca href=\"\/collections\/reifenpflege\"\u003etyre dressing\u003c\/a\u003e on the flank — and the complete wheel workflow comes in at around 15 minutes per vehicle, if you stay on it every two weeks. That's the most common combo our customers buy: Vorreiniger B + Magic Wheel Cleaner. A precise, repeatable routine that works without scrubbing.\u003c\/p\u003e\n\n\u003cp\u003eHead to head with the acid-free classic SONAX FelgenBeast, the Magic Wheel Cleaner comes out ahead on two counts: the higher viscosity means longer contact time on the wheel, and the workshop formula is dosed stronger for commercial use. The FelgenBeast has a milder smell, though — if you work in a closed garage you'll definitely notice that. The Magic Wheel Cleaner is the workshop standard. The FelgenBeast is the garage all-rounder. Both do their job reliably; the question is which one fits your working environment.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"500 ml","offer_id":48503670374735,"sku":"D1-KCX-425500","price":13.49,"currency_code":"EUR","in_stock":true},{"title":"2x 500ml","offer_id":49725159276879,"sku":"D1-KCX-425500_2","price":29.38,"currency_code":"EUR","in_stock":true},{"title":"3x 500ml","offer_id":49725159342415,"sku":"D1-KCX-425500_3","price":43.62,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48503670407503,"sku":"D1-KCX-425010","price":123.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-magic-wheel-cleaner-saeurefreier-felgenreiniger.jpg?v=1776410618"},{"product_id":"koch-chemie-allround-surface-cleaner-asc-allzweckreiniger","title":"Allround Surface Cleaner \"Asc\" All-Purpose Cleaner","description":"\u003ch2\u003eReady-to-use and streak-free through the cabin with the Koch-Chemie Allround Surface Cleaner\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Allround Surface Cleaner? A ready-to-use, pH-neutral surface cleaner for plastic, displays, leather, glass and textile inside the cabin. Streak-free straight from the bottle, no diluting. Not meant for baked-on grease films, nicotine residue or oily shop surfaces — for that the Green Star is the better call.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003e\u003cstrong\u003eKoch-Chemie Allround Surface Cleaner\u003c\/strong\u003e is a ready-to-use, pH-neutral all-purpose cleaner from Koch-Chemie that cleans plastic, glass, leather and display surfaces inside the cabin without streaks. You apply it undiluted straight from the spray bottle. No mixing, no dilution chart, no measuring cup in a bucket.\u003c\/p\u003e\n\n\u003cp\u003eThat ready-to-use approach is exactly what sets the ASC apart from the alkaline Green Star out of the same house: there a concentrate for heavy shop grime, here a mild, fast helper for everyday interior care. The ASC isn't a replacement for the heavy-duty cleaner, it's its lighter sister for the stuff you reach for daily and in any amount you like.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReady-to-use, no diluting.\u003c\/strong\u003e You grab the bottle off the shelf, hit the steering wheel, centre console or door card, and wipe down with a microfibre cloth. No dosing, no mixing mistakes, no leftover you toss at the end of the week. That saves 3–5 minutes of pure prep per interior clean and makes the ASC the cleaner for the moment between two cars or between a customer and a handover — the one that has to be quick to hand, where you don't go fetch a canister off the rack first.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003epH-neutral on displays, leather and gloss trim.\u003c\/strong\u003e The neutral pH makes the ASC safe on surfaces an alkaline cleaner would chew up over time — coated leather, piano-black panels, touchscreens, matte chrome accents. Across the 10 to 15 different materials in a modern cabin you work with just one product.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStreak-free, no cleaning film.\u003c\/strong\u003e The formula wipes off without residue and leaves no water marks or hazing on glass, displays and high-gloss plastics. Inside the cabin that's the whole game: dust and fingerprints are one problem, a greasy film after the clean is the second — especially when the sun hits at a low angle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/asc_1_hero.jpg?v=1775896039\" alt=\"Koch-Chemie ASC 500 ml on a concrete wall edge in front of a black car interior\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Don't spray directly onto displays, buttons or gloss panels. The mist from the spray bottle works its way into display edges, button gaps and speaker grilles, where it settles as a fine film you won't get back out later. Instead, lay down 2–3 squirts on the folded face of your microfibre cloth and work from there onto the surface. Only on big, closed panels like door cards or the headliner do you spray straight onto the part — there the mist doesn't matter.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSpray, wait 30 seconds, microfibre after\u003c\/h3\u003e\n\u003cp\u003eYou spray the Koch-Chemie Allround Surface Cleaner undiluted onto the surface from about 10–15 cm, let it dwell for 15–30 seconds and wipe down with a clean microfibre cloth. That's all the prep it takes.\u003c\/p\u003e\n\n\u003cp\u003eOn bigger panels like the dashboard, door cards or headliner, three to five squirts per part is plenty. Give the cleaner a moment to break down skin oils, fingerprints and the dust-binding layer, then wipe down evenly with the dry side of your cloth. For vents, buttons and trim strips you spray onto the cloth first and work from there into the edges.\u003c\/p\u003e\n\n\u003cp\u003eTreat the headliner with extra care: only dampen the cloth, never spray the part directly. The headliner fabric mustn't get soaked, or the adhesive underneath lets go. With the ASC you work in broad, long passes so no dry edges form between the damp and the untreated areas.\u003c\/p\u003e\n\n\u003cp\u003eA common mistake is too much product and too long a dwell time. When the ASC flashes off, fine streaks stay behind that you then have to re-wet and wipe away — an avoidable extra round. So work panel by panel rather than across the whole surface, and keep the dwell time under a minute.\u003c\/p\u003e\n\n\u003cp\u003eWith a cleaning gun like the Tornador or Cyclone you can also work the ASC into textiles, seat seams and door pockets, where the cloth alone won't reach. The pH-neutral formula is built for it: it lifts the dirt into foam and picks back up with little residue. With the gun method, follow up afterwards with compressed air or a thirsty cloth so no moisture stays trapped in the part.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/asc_2_anwendung.jpg?v=1775896038\" alt=\"ASC sprayed onto a microfibre cloth in front of a car interior\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eStrengths and limits of the ASC day-to-day\u003c\/h3\u003e\n\u003cp\u003eThe ASC is pH-neutral and ready-to-use. That makes it safe on delicate surfaces, but it costs cleaning power on heavily soiled or very greasy areas. That's deliberate in the formula, not a shortfall.\u003c\/p\u003e\n\n\u003cp\u003eOn typical everyday dirt the Allround Surface Cleaner pulls its weight: skin oil on the wheel, fingerprints on the touchscreen, a dust film on the centre console, pollen blown into the A-pillar, white specks on black plastic. That's what the product was made for.\u003c\/p\u003e\n\n\u003cp\u003eOn coated leather, piano black and gloss trim the neutral pH is an extra safety net that takes away the material guesswork that always rides along with alkaline interior cleaners. You don't have to think before every use about whether the product suits the material — on normal plastic, glass and leather surfaces in the car the ASC is a safe call.\u003c\/p\u003e\n\n\u003cp\u003eWhat the ASC won't do: it won't shift old nicotine films, an oily workshop grip on the door frame or coffee stains baked into the fabric. Badly yellowed plastics on the sill or a dried cola splash in the cup holder need more muscle too. If your cabin gets cared for regularly, the Allround Surface Cleaner is your product.\u003c\/p\u003e\n\n\u003cp\u003eWhen you're prepping a lease return or getting a used car ready to sell, grab the alkaline \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-green-star-gs-universalreiniger\"\u003eheavy-duty cleaner\u003c\/a\u003e and then use the ASC afterwards on the finer surfaces like displays, leather and gloss trim. The two complement each other. They don't replace each other. Try to cover the whole spectrum with just one of them and you'll end up either short on power or short on material safety.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/asc_3_detail.jpg?v=1775896040\" alt=\"ASC streak-free on a black piano-black panel inside the cabin\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e500 ml on the shelf, 10 L in the rack\u003c\/h3\u003e\n\u003cp\u003eThe ASC is meant for anyone who keeps their cabin clean weekly or after every longer drive. No dosing, no waiting, no material worries — the cleaner that just has to be within reach.\u003c\/p\u003e\n\n\u003cp\u003eFor hobby detailers with one or two cars the 500 ml spray bottle reliably lasts a full season. With weekly use and microfibre-backed application 500 ml is built for three to four months — one bottle per car per quarter is a realistic rule of thumb.\u003c\/p\u003e\n\n\u003cp\u003eIf you work a fleet, a shop or as a mobile detailer, you're better off jumping straight to the 10-litre canister and topping up the spray bottles as needed. A full interior detail on a passenger car burns through 80 to 150 ml of product. So the 10-litre canister is good for around 60 to 120 full details, depending on how dirty the cars are and how you work.\u003c\/p\u003e\n\n\u003cp\u003eThe ASC is less of a fit when you're mainly dealing with extreme cases — smoker cars, mouldy seats, dried coffee on microfibre seat covers, paint and grease splatter out of the service bay. For that there are dedicated products in another league, and there the mild pH is more of a drawback than a plus. The ASC is deliberately not a workshop cleaner.\u003c\/p\u003e\n\n\u003cp\u003eIn your workflow you pair the ASC with a short-pile \u003ca href=\"https:\/\/detailing1.de\/products\/the-collection-mikrofasertuecher-allround-365-kurzfloriges-edgeless-mikrofasertuch-365-gsm\"\u003emicrofibre cloth\u003c\/a\u003e from 300 GSM up — dense enough for the wheel and door card, soft enough for displays and piano-black panels. Two to three cloths per car is a solid rule of thumb: one for rough surfaces, one for displays and glass, optionally one for leather.\u003c\/p\u003e\n\n\u003cp\u003eIn our \u003ca href=\"https:\/\/detailing1.de\/collections\/innenraumreiniger\"\u003einterior cleaner\u003c\/a\u003e category you'll find more products for the special cases: heavily soiled fabric upholstery, leather cleaning, plastic care after the deep clean. After cleaning with the ASC the surface is left bare — if you want to refresh plastics colour-wise or give them an antistatic treatment, you put an interior conditioner on top in a second step. The ASC is the cleaning step, not the care step.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_asc_4_lineup.jpg?v=1775896038\" alt=\"Koch-Chemie ASC 500 ml and 10 L variants lineup on concrete\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Koch-Chemie Allround Surface Cleaner stays the everyday cleaner that has to be right to hand under the driver's seat or on the workshop rack. Not the product for every problem in the cabin, but the product for 80 percent of all interior jobs in a well-kept fleet. If you work across changing materials all the time and want a cleaner whose compatibility you don't have to think about every single time, this is the one.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"500 ml","offer_id":48409657934159,"sku":"D1-KCX-367500","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"2x 500ml","offer_id":49670775701839,"sku":"D1-KCX-367500_2","price":17.62,"currency_code":"EUR","in_stock":true},{"title":"3x 500ml","offer_id":49670775734607,"sku":"D1-KCX-367500_3","price":26.16,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48409657966927,"sku":"D1-KCX-367010","price":54.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-allround-surface-cleaner-allzweckreiniger.jpg?v=1710624390"},{"product_id":"koch-chemie-motorplast-mp-motorkonservierung","title":"Motorplast \"Mp\" Engine Preservation","description":"\u003ch2 id=\"speakable-headline\"\u003ePreserve the engine bay instead of just sprucing it up for a minute\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Koch-Chemie Motorplast? A water-based, silicone-free polymer preservation for engines, ancillaries, housings and rubber hoses that forms a permanently elastic protective film up to 250 °C and carries the Daimler factory approval (GOTIS P 00.16 – 02.0). Not suitable for drive belts, brake components, body paint or open intake areas.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Motorplast „Mp“\u003c\/strong\u003e is an engine preserver from Koch-Chemie that protects plastic covers, rubber hoses and ancillaries in the engine bay against corrosion, road salt and UV stress with a permanently elastic polymer film. You spray it on as a pump mist over the pre-cleaned, still-wet engine bay, where it pushes out the residual water and cross-links after 6 to 8 hours into a dirt-repellent, wafer-thin layer. Unlike classic engine-shine sprays, Motorplast skips propellants and silicone, which is what clears it for use in body shops (no painter's fisheyes) and on Mercedes-Maybach models (official factory approval).\u003c\/p\u003e\n\n\u003cp\u003eThe look stays deliberately satin-matt rather than high-gloss — the surface keeps its original character, the protection is physically there without the engine looking like it has just been oiled up. After the treatment the bay looks clean, not „greased“. That's the OEM logic behind the Daimler approval: not gloss cosmetics, but material protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-motorplast-mp-motorkonservierung_hero_v6.png?v=1777826674\" alt=\"Koch-Chemie Motorplast Mp being sprayed into the rear engine bay of a Porsche 911 992 boxer Detailing1\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDaimler factory approval instead of marketing shine.\u003c\/strong\u003e Motorplast is listed internally at Mercedes-Benz under GOTIS number P 00.16 – 02.0 and is approved up to Mercedes-Maybach. The approval checks compatibility on EPDM coolant hoses and PA, PP and ABS covers under 90–110 °C sustained load — that's why brand workshops reach for this product instead of any random engine-shine spray.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone-free and propellant-free.\u003c\/strong\u003e The water-based polymer carrier holds no volatile silicone oils (critical near paintwork — think fisheyes) and no aerosol (no butane\/propane propellants). VOC content about 3 %, labelling required under GHS07, but not flammable. That cuts the risk on jobs done right there in the shop considerably.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3 to 8 months of protection, 50–200 ml per engine bay.\u003c\/strong\u003e A 500 ml spray bottle lasts for 2 to 10 full treatments depending on engine size, which works out to 1 to 3 years of car care day-to-day. In the 5 L pro canister the price per litre drops noticeably — that version is built for detailing shops, fleet care and high-mileage households. 20 and 200 litre containers exist for industrial customers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The most common mistake with Motorplast isn't too little, it's too much. Lay down puddles instead of a fine mist and you stretch the drying time well past the usual 6 to 8 hours, the polymer cures unevenly and leaves milky edges or tacky spots. The clean routine: let the engine cool to hand-warm, pre-clean with \u003ca href=\"\/products\/koch-chemie-green-star-gs-universalreiniger\"\u003eGreen Star\u003c\/a\u003e at 1:10, rinse off with a soft water jet, mist Motorplast thinly into the still-wet bay, close the bonnet and let it sit overnight. Tap any leftover pools the next morning with a dry microfibre cloth. It's self-levelling — no working in with a pad needed.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSpray it on wet. Bonnet shut. Dry overnight.\u003c\/h3\u003e\n\n\u003cp\u003eYou spray Motorplast onto the pre-cleaned, still-wet engine bay because the residual water carries the polymers right into the tight gaps before the product itself pushes it back out. That's pro technique straight from the Daimler factory-norm test, not a marketing slogan.\u003c\/p\u003e\n\n\u003cp\u003eBefore you apply, let the engine cool down — hand-warm is ideal, boiling hot is not. On a block sitting at 130 °C oil temperature after a motorway run, the water-glycol-ether mix flashes off instantly and burns the polymers into the plastic as streaks. The officially approved heat window is 250 °C component temperature — that's for the cured film, not for the moment you apply it.\u003c\/p\u003e\n\n\u003cp\u003eFor a mid-size car, reckon on 50 to 200 ml. Work sparingly from about 20 cm away with the spray head and go systematically from back to front — valve cover, fuse box, then intake manifold, then the visible hoses and seals. You can reach awkward spots with a Cyclone or Tornador gun at 4 to 6 bar; in the home garage the supplied spray head does the job. Keep the mist away from open intake tracts and mass airflow sensors — those hot-wire sensors react badly to polymer coatings.\u003c\/p\u003e\n\n\u003cp\u003eOnce it's on, close the bonnet and let it sit 6 to 8 hours, ideally overnight. Day-one test: check the next morning whether any pools or drips are still holding. If so, tap them with a dry microfibre cloth — don't rub. The film is self-levelling and needs no mechanical spreading.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-motorplast-mp-motorkonservierung_anwendung.png?v=1777464474\" alt=\"Koch-Chemie Motorplast Mp being sprayed onto a wet engine bay Detailing1\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePlastic, rubber, ancillaries. Never the drive belt.\u003c\/h3\u003e\n\n\u003cp\u003eMotorplast is approved for the typical engine-bay materials: PA, PP and ABS plastic covers, EPDM rubber hoses, seals and metal ancillaries in aluminium or steel. On these substrates the permanently elastic polymer film forms, holding off dirt build-up by months and slowing road-salt corrosion.\u003c\/p\u003e\n\n\u003cp\u003eThe hard limits are friction- and safety-critical. Drive belts, V-belts and pulleys are off-limits — the polymer layer cuts the grip friction, the belt slips and worst case the alternator drops out. For the same reason, keep it off brake components, brake disc faces and the pedals. On body paint, overspray leaves streaks and is pointless there anyway — Motorplast is no paint sealant. Any mist that lands on an inner wing or bumper edge, wipe it off straight away with a damp microfibre.\u003c\/p\u003e\n\n\u003cp\u003eIf too much product did end up in the bay and milky streaks have formed, a stripping routine with an alkaline cleaner sorts it: spray \u003ca href=\"\/products\/koch-chemie-green-star-gs-universalreiniger\"\u003eGreen Star\u003c\/a\u003e on generously at 1:10, foam it up with a soft detailing brush, rinse off. The cross-linked polymers break down under the APC and the film comes off without residue. After that you can lay on a second, thinner coat of Motorplast.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-motorplast-mp-motorkonservierung_detail.png?v=1777464492\" alt=\"Koch-Chemie Motorplast Mp permanently elastic protective film on a plastic cover\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpring and autumn. Twice a year is plenty.\u003c\/h3\u003e\n\n\u003cp\u003eThe typical rhythm for Motorplast is twice a year — once in spring after the salt season and once in autumn before winter sets in. In between, dusting the plastic covers with a microfibre cloth is enough. Detailing shops slot the product into their winter-check packages, because 5 minutes of work buys 6 months of corrosion protection.\u003c\/p\u003e\n\n\u003cp\u003eThe 500 ml spray bottle is the right call for a single car or for hobbyists getting seasonal vehicles like convertibles or classics ready for spring. Per treatment 50 to 100 ml — so the bottle carries you across several seasonal cycles. For multi-car households or commercial detailers the 5 litre canister pays off: noticeably lower price per litre, just decant it into a separate \u003ca href=\"\/collections\/koch-chemie\"\u003eKoch-Chemie\u003c\/a\u003e cylinder bottle with a spray head. 20 and 200 litre containers are pure industrial variants for workshop groups and OEM supplier chains.\u003c\/p\u003e\n\n\u003cp\u003eStorage is fussier than with many other detailing products: Motorplast keeps at +5 °C to +25 °C, frost-free and out of the sun. Frost breaks down the polymer emulsion and the product won't spray cleanly afterwards. It's fine in the garage or the stockroom — just don't let it overwinter in the boot.\u003c\/p\u003e\n\n\u003cp\u003eApply Motorplast properly once — cold engine bay, wet pre-clean, thin mist, bonnet shut overnight — and you get an engine bay that looks the same after winter as it did before. That's the Detailing1 standard: not shine in the shop window, but an engine that still runs like new after three winters. For full seasonal care you pair Motorplast with \u003ca href=\"\/products\/koch-chemie-green-star-gs-universalreiniger\"\u003eGreen Star\u003c\/a\u003e as the pre-cleaner — that's the complete engine-bay workflow in under 30 minutes per car.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-motorplast-mp-motorkonservierung_lineup.png?v=1777464511\" alt=\"Koch-Chemie Motorplast Mp 500ml spray bottle and 5 litre canister Detailing1\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n","brand":"Koch-Chemie","offers":[{"title":"500 ml","offer_id":48498577211727,"sku":"D1-KCX-236500","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"2x500ml","offer_id":49763373973839,"sku":"D1-KCX-236500_2","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"3x500ml","offer_id":49763374006607,"sku":"D1-KCX-236500_3","price":29.07,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":48498577277263,"sku":"D1-KCX-236005","price":65.49,"currency_code":"EUR","in_stock":true},{"title":"20 liters","offer_id":49763374039375,"sku":"D1-KCX-236020","price":244.49,"currency_code":"EUR","in_stock":true},{"title":"200 liters","offer_id":49763374072143,"sku":"D1-KCX-236200","price":2602.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-motorplast-motorkonservierung.jpg?v=1710780165"},{"product_id":"koch-chemie-autoshampoo-as-auto-shampoo","title":"Autoshampoo \"As\" Car Shampoo","description":"\u003ch2 id=\"speakable-headline\"\u003eWeekly hand washing with no wax or sealant loss, thanks to Koch-Chemie Autoshampoo\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Koch-Chemie Autoshampoo \"As\"? A mildly alkaline shampoo (pH 9) for hand washing and gantry car washes, built on an anionic-nonionic surfactant blend. It's phosphate- and NTA-free, gives you around eight washes from a single litre, and looks after your wax and sealants while it does. Not meant for the first wash of heavily oiled shop vehicles, and safe on fresh ceramic coatings only when you dilute it 1:15.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Autoshampoo \"As\"\u003c\/strong\u003e is a mildly alkaline car shampoo from Unna with a pH of 9. Its mix of anionic and nonionic surfactants emulsifies dirt without going after the wax or sealant film already on the paint. The formula is completely free of phosphates and NTA and is cleared for biological greywater treatment plants, which is exactly why you'll find it in hobby wash bays as well as in larger gantry washes and tunnel washes.\u003c\/p\u003e\n\n\u003cp\u003eThe pH 9 profile is the core design trade-off: strong enough to break down baked-on road film and pollen, mild enough to keep your typical carnauba waxes and paint sealants alive through a normal wash season. That balance is what sets As apart from the harsher pre-cleaner and from the gentler Ceramic Effect shampoo in the same range.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1 litre = about 8 washes.\u003c\/strong\u003e At the standard hand-wash dilution of 1:15 (about 65 ml of As in 10 litres of bucket water), a 1-litre bottle covers roughly eight mid-size cars, so you're under a euro of product per car. If you've got two cars on the go, the 2x 1L set works out cheaper; shops and detailers running three washes a week should grab the 10-litre canister.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy on wax and sealant when you watch the dwell time.\u003c\/strong\u003e At pH 9, As won't strip carnauba waxes or paint sealants as long as the foam sits on the paint for under two minutes and gets rinsed off with clean water. Lay it on too strong, let it dwell, and you risk eating into the protection layer by layer. Dilution and a steady rinse rhythm aren't a suggestion here, they're the deal.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFree of phosphates, NTA and solvents.\u003c\/strong\u003e The formula is tuned for biological greywater treatment and causes no headaches for commercial washes with water-recycling stages. For a wash at home it means the run-off heading into the drain won't overload a treatment plant, a real plus over the cheaper supermarket shampoos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-autoshampoo-as_hero_szene_99b20bef-5b0d-4670-9a9e-d11cc076ae67.png?v=1774952249\" alt=\"Koch-Chemie Autoshampoo As 1L and 10L in the Detailing1 studio next to a water bucket and wash mitt, black Porsche GT3 RS in the background\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e The biggest difference in your end result isn't the shampoo brand, it's the water temperature and how long the foam sits. Lukewarm water (25-30 °C) cuts through dirt noticeably faster than cold, and the foam should sit on a panel for 60 to 90 seconds at most before you rinse. Work in full sun and let the foam dry on, and you'll pull water spots and streaks onto the paint, which happens with any shampoo, not just As. Order of play: roof first, bonnet second, rear third, sides last, so no panel dries off before the rinse.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e1:5, 1:10 or 1:15, the dilution decides foam and cleaning power\u003c\/h3\u003e\n\n\u003cp\u003eWith Koch-Chemie Autoshampoo \"As\", the dilution ratio controls foam volume, cleaning power and how kind it is to the paint, all at once. Stick to the same concentration every time and you either leave cleaning power on the table or burn through product.\u003c\/p\u003e\n\n\u003cp\u003eThe standard hand-wash dilution is 1:15, about 65 ml of As in 10 litres of bucket water, which gives you a medium-creamy foam that clings well on vertical panels and rinses off clean with no residue. For dirtier cars after a long motorway run or van use, step up to 1:10 (around 100 ml in 10 litres); for cars parked outside all the time with baked-on pollen and bird mess, go to 1:5 (200 ml in 10 litres). Going stronger than 1:5 brings no measurable cleaning gain, just wastes product and raises the risk that the surfactant load starts going after your sealant.\u003c\/p\u003e\n\n\u003cp\u003eFor foam cannons on a pressure washer (snow-foam lance, foam lance), As only works up to a point, the foam structure is built for bucket washing, not for sticky pre-foam. If you work with a foam cannon, you'll get on far better with \u003ca href=\"\/products\/koch-chemie-gentle-snow-foam-gsf-reinigungsschaum\"\u003eGentle Snow Foam \"Gsf\"\u003c\/a\u003e or the classic \u003ca href=\"\/products\/koch-chemie-pre-foam-efficient-pfe-vorreiniger-insektenloeser\"\u003ePre-Foam efficient \"Pfe\"\u003c\/a\u003e from the same house. As stays the bucket shampoo for the two-bucket method with a wash mitt and grit guard.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003cth\u003eDilution\u003c\/th\u003e\n\u003cth\u003eAmount per 10 L water\u003c\/th\u003e\n\u003cth\u003eRecommended dwell time\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeekly hand wash, lightly soiled\u003c\/td\u003e\n\u003ctd\u003e1:15\u003c\/td\u003e\n\u003ctd\u003e~65 ml\u003c\/td\u003e\n\u003ctd\u003eno dwell, wash straight away\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStandard wash after 2-4 weeks\u003c\/td\u003e\n\u003ctd\u003e1:10\u003c\/td\u003e\n\u003ctd\u003e~100 ml\u003c\/td\u003e\n\u003ctd\u003emax. 60 sec\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHeavily soiled, pollen, bird mess\u003c\/td\u003e\n\u003ctd\u003e1:5\u003c\/td\u003e\n\u003ctd\u003e~200 ml\u003c\/td\u003e\n\u003ctd\u003emax. 90 sec, then rinse\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGantry wash \/ brush tunnel wash\u003c\/td\u003e\n\u003ctd\u003e1:50-1:100\u003c\/td\u003e\n\u003ctd\u003edosing system\u003c\/td\u003e\n\u003ctd\u003emachine-controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-autoshampoo-as_anwendung_szene_5312e873-c490-472b-9c8d-3dd91e6ce972.png?v=1774952253\" alt=\"Daniel from Detailing1 washes the rear of a black Porsche GT3 RS with a wash mitt and foam from Koch-Chemie Autoshampoo As\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003ch3\u003eCoatings, the shop first wash and bugs, when As isn't the right call\u003c\/h3\u003e\n\n\u003cp\u003eKoch-Chemie Autoshampoo \"As\" covers the middle of the dirt range for well-kept private cars; it was never meant as a universal do-everything cleaner. Three cases where another product does the job better.\u003c\/p\u003e\n\n\u003cp\u003eOn fresh ceramic coatings (under six months old), run As only at the weakest 1:15 dilution and keep the dwell time under 60 seconds. If you want to keep a new coating alive long-term, reach instead for \u003ca href=\"\/products\/koch-chemie-reactivation-shampoo-rs-auto-shampoo-keramikversiegelung\"\u003eReactivation Shampoo \"Rs\"\u003c\/a\u003e or \u003ca href=\"\/products\/koch-chemie-ceramic-effect-shampoo-ces-autoshampoo-versiegelung\"\u003eCeramic Effect Shampoo \"Ces\"\u003c\/a\u003e from the same house, both pH-neutral and both re-activating the coating's hydrophobic layer on every wash. With yearly top-ups, the Reactivation line gives you five to seven months more beading than a plain As workflow.\u003c\/p\u003e\n\n\u003cp\u003eFor the first wash of shop vehicles with a baked-on crust of oil and brake dust, As is too mild. Here you lay the \u003ca href=\"\/products\/koch-chemie-vorreiniger-b-vb-vorreiniger\"\u003eVorreiniger B \"Vb\"\u003c\/a\u003e on the paint first as a pre-wash, let it dwell for two minutes and rinse, then As takes over the actual care wash. Skip the pre-wash and go straight in with As on grossly dirty paint, and you'll drag fine grit across the clear coat under pressure with the wash mitt, leaving swirl marks that later only come out with the polisher.\u003c\/p\u003e\n\n\u003cp\u003eFor heavily caked-on bugs on the front bumper and windscreen, As again won't do what a dedicated pre-treatment does. The \u003ca href=\"\/products\/koch-chemie-insect-dirt-remover-idr-insekten-schmutzentferner\"\u003eInsect \u0026amp; Dirt Remover \"Idr\"\u003c\/a\u003e or a pre-foam with bug-dissolving action goes on the critical spots for two minutes, softens the protein structure of the bugs, and only then comes the wash with As. Three extra minutes save you scrubbing with the wash mitt, which risks paint damage.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-autoshampoo-as_ergebnis_szene_3701b713-b958-4e63-9830-c60204827df0.png?v=1774952259\" alt=\"Water beading on the freshly washed front of a black Porsche GT3 RS, Koch-Chemie Autoshampoo As 1L peripheral\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003ch3\u003eAs, Rs or Ces, the range decision\u003c\/h3\u003e\n\n\u003cp\u003eKoch-Chemie has three closely related options in its shampoo range, each fitting differently depending on paint status and wash frequency.\u003c\/p\u003e\n\n\u003cp\u003eThe classic As is the right pick for non-coated paint and for cars with carnauba wax or polymer sealant protection that doesn't have to be reactivated on every wash. If the car gets washed one to four times a month, the paint is looked after normally but not ceramic-sealed, and there's no pricey coating-maintenance workflow running, As is the most economical and chemically sensible standard.\u003c\/p\u003e\n\n\u003cp\u003eThe Reactivation Shampoo \"Rs\" steps in where a ceramic coating is under 18 months old and you want to reactivate it on every wash. Rs has a pH-neutral character and contains polymers that bond to the coating's SiO₂ structure and rebuild the hydrophobic beading. For a plain wash with no coating involved, Rs makes no sense, the extra cost per litre only pays off when a coating actually exists.\u003c\/p\u003e\n\n\u003cp\u003eThe Ceramic Effect Shampoo \"Ces\" is the premium option with an extra SiO₂ boost; it brings a mini coating refresh to every wash and suits cars with no permanent coating that should still show hydrophobic behaviour between detailing sessions. If you get a professional sealant done every four to six months, Ces carries you past the Reactivation level in between, without laying down a coating of your own.\u003c\/p\u003e\n\n\u003cp\u003eRule of thumb for the buying call: As for uncoated paint and solid upkeep, Rs for existing coatings under 18 months, Ces for premium care without a coating. A 1-litre bottle of As lasts about eight to ten months on one car a month; the 10-litre container is built for detailers and multi-car households running two or more washes a week. The whole \u003ca href=\"\/collections\/autoshampoo\"\u003eAutoshampoo\u003c\/a\u003e range at Detailing1 carries all three variants, and the choice follows the paint status, not the price tag.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-autoshampoo-as_kontext_szene_4d3a26a0-a459-48c8-897c-eec613055b0c.png?v=1774952263\" alt=\"Koch-Chemie Autoshampoo As 1L and 10L lineup with microfibre cloths, bucket and wash mitt in front of a black Porsche GT3 RS in the Detailing1 studio\" loading=\"lazy\" width=\"1200\"\u003e\n","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":48409514049871,"sku":"D1-KCX-13001","price":6.99,"currency_code":"EUR","in_stock":true},{"title":"2x 1000ml","offer_id":49670828753231,"sku":"D1-KCX-13001_2","price":13.7,"currency_code":"EUR","in_stock":true},{"title":"3x 1000ml","offer_id":49670828785999,"sku":"D1-KCX-13001_3","price":20.34,"currency_code":"EUR","in_stock":true},{"title":"21kg","offer_id":49382294094159,"sku":"D1-KCX-13021","price":54.49,"currency_code":"EUR","in_stock":true},{"title":"210kg","offer_id":49382294126927,"sku":"D1-KCX-13210","price":533.99,"currency_code":"EUR","in_stock":false},{"title":"10 liters","offer_id":48409514082639,"sku":"D1-KCX-13010","price":29.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-autoshampoo-auto-shampoo.jpg?v=1710626847"},{"product_id":"koch-chemie-clay-spray-cls-gleitspray-reinigungsknete","title":"Clay Spray \"Cls\" Clay Lube for Decon Clay","description":"\u003ch2\u003eStep up your car care with the Koch-Chemie Clay Spray \"Cls\" clay lube for decontamination clay\u003c\/h2\u003e\n\u003cp\u003eWant a glass-smooth surface before you polish? That's where the \u003cstrong\u003eKoch-Chemie Clay Spray \"Cls\"\u003c\/strong\u003e earns its keep. This clay lube is the partner you reach for whenever you break out a clay bar, helping it glide across the panel for a flawless finish. The formula is built to keep marring to a minimum and let you wipe off clean, with no greasy film left behind. Perfect on smooth surfaces like paint and glass, it changes the way you decon a car.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps marring down:\u003c\/strong\u003e the slick glide means far less risk of the clay dragging and scratching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo greasy film:\u003c\/strong\u003e unlike a lot of lubes, it doesn't leave that unwanted residue behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakes your clay last:\u003c\/strong\u003e the special blend stretches the life of your clay bars and pads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eProperly clean, properly glossy\u003c\/h3\u003e\n\u003cp\u003eThe Koch-Chemie Clay Spray is formulated to clean efficiently but gently, so even the most stubborn bonded contaminants come off without a fight. You're left with a flawless surface that brings the gloss of your paint right back out.\u003c\/p\u003e\n\u003ch3\u003eDead simple to use, results that speak for themselves\u003c\/h3\u003e\n\u003cp\u003eUsing it couldn't be easier: spray it onto the area you're working and go over it with a clay bar. Any residue wipes off with a microfibre cloth, which saves you time and gets you impressive results.\u003c\/p\u003e\n\u003ch3\u003eAt home on all kinds of surfaces\u003c\/h3\u003e\n\u003cp\u003ePaint, glass or any other smooth surface — the Koch-Chemie Clay Spray is versatile enough to handle the lot, leaving a spotless finish that protects your car's value and keeps it looking its best.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"500 ml","offer_id":48409456509263,"sku":"D1-KCX-368500","price":11.99,"currency_code":"EUR","in_stock":true},{"title":"2x 500ml","offer_id":49670941442383,"sku":"D1-KCX-368500_2","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"3x 500ml","offer_id":49670941475151,"sku":"D1-KCX-368500_3","price":34.89,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48409456542031,"sku":"D1-KCX-368010","price":68.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-clay-spray-gleitspray-reinigungsknete.jpg?v=1710623742"},{"product_id":"koch-chemie-top-star-ts-innenraum-kunststoffpflege","title":"Top Star \"Ts\" Interior Plastic Care","description":"\u003ch2 id=\"speakable-headline\"\u003eSatin-matt shine in the interior with the Koch-Chemie Top Star \"Ts\"\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Top Star \"Ts\"? A silicone-oil-free premium care emulsion for plastic and rubber parts in the car interior that leaves a satin-matt protective film with UV protection and an antistatic effect. Not a cleaner, not a high-gloss dressing, and not for the steering wheel or pedals.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Top Star \"Ts\"\u003c\/strong\u003e is a care emulsion from Koch-Chemie in Unna that refreshes, protects and seals plastic and rubber parts in the car interior with a natural satin-matt finish. The silicone-oil-free formula sets it apart from classic cockpit sprays that can foul up paint and glass work later on. Instead of artificial high gloss it leaves a matt protective film with a UV blocker and an antistatic effect — Daimler-approved, so with documented material compatibility on OEM plastics.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-top-star-ts-innenraum-kunststoffpflege_hero_9b51d837-3a66-4761-92f8-7a0dd25abb27.jpg?v=1776370806\" alt=\"Koch-Chemie Top Star Ts 1000ml on the centre console of a white Audi RS3, seen through the open passenger door\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSatin-matt, not plastic grease.\u003c\/strong\u003e The Top Star \"Ts\" lays down a natural matt film on the dashboard and door trim. No high-gloss effect, no reflections in the windscreen. That's why Koch-Chemie positions it as an OEM workshop product — workshops want delivery condition, not an aftermarket-accessory look.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone-oil-free, so it plays nice with paint.\u003c\/strong\u003e Classic cockpit dressings with silicone oil creep onto glass and paint on the air currents and mess up polishing, coatings and bonding work later. The Top Star \"Ts\" goes without silicone oil. That makes it the first choice in workshops that also polish in the same room.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV protection plus antistatic in one step.\u003c\/strong\u003e The emulsion blocks the UV radiation that makes cockpits brittle in summer, and it cuts the surface's electrical charge. The result: less dust pull, longer intervals between cleans, and plastic on the parcel shelf and under the rear window that holds its shape longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e The Top Star \"Ts\" is a care product, not a cleaner — and that's the most common mistake. Spray it onto dusty or greasy plastic and after 2–3 days you get patchy spots and water marks, because the care product seals the dirt in along with everything else. Always pre-clean first with an \u003ca href=\"\/products\/koch-chemie-green-star-gs-universalreiniger\"\u003eall-purpose cleaner\u003c\/a\u003e, let the surface dry, and only then lay the Top Star down. Five extra minutes save you the rework later.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCold plastic. Sponge. Wipe off.\u003c\/h3\u003e\n\n\u003cp\u003eThe Top Star \"Ts\" doesn't go straight onto the dashboard — it goes onto an applicator sponge or a soft microfibre cloth. That way the product ends up where it belongs and not on the radio, glass or steering wheel.\u003c\/p\u003e\n\n\u003cp\u003e5–10 ml is enough for a whole interior per car. Work it in with even, overlapping passes, let it soak for 30–60 seconds, then go back over it with a dry microfibre cloth. The wipe-off isn't an optional step — skip it and the surface stays tacky and pulls dust harder than before.\u003c\/p\u003e\n\n\u003cp\u003eWork at room temperature, not in blazing sun and not on hot plastic. Above 30 °C the emulsion flashes off too fast and shows wipe streaks. The right moment is after the interior clean, when the surfaces are dust-free and dry — then a full \u003ca href=\"\/collections\/kunststoffpflege\"\u003eplastic care\u003c\/a\u003e job on a mid-size car takes under 10 minutes.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-top-star-ts-innenraum-kunststoffpflege_anwendung_a732812e-02c9-4693-a41e-b5b208068ac2.jpg?v=1776370806\" alt=\"Detailer wiping the dashboard with Koch-Chemie Top Star Ts in an Audi RS3 interior\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003ch3\u003eDashboard yes. Steering wheel no.\u003c\/h3\u003e\n\n\u003cp\u003eThe Top Star \"Ts\" is made for smooth and textured plastics, hard components and rubber seals — so dashboard, centre console, door trim, pillar trim, boot walls and the rubber on window and door seals. Here it visibly refreshes faded surfaces and protects against further fading from UV.\u003c\/p\u003e\n\n\u003cp\u003eIt's not suitable anywhere grip matters for safety. That means the steering wheel, gear lever, pedals, handbrake grip and floor mats. The satin-matt seal drops the friction slightly, and that little bit is exactly what you don't want where you steer the car. Alcantara, fabric and leather are off the list too — there are dedicated products for those.\u003c\/p\u003e\n\n\u003cp\u003eOn hard, badly weathered plastic — say a 15-year-old cockpit with dried-out surface material — the Top Star \"Ts\" hits its limits. Once the plastic has gone powdery or chalky, there's no base left for the care product to grab onto. At that point no care product helps anymore, only a re-coat system or replacement. For these borderline cases the sister exterior product \u003ca href=\"\/products\/koch-chemie-plast-star-pss-premium-kunststoffpflege-siliconoelfrei\"\u003ePlast Star Pss\u003c\/a\u003e is tougher, but even that has its limits on completely dead surfaces.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-top-star-ts-innenraum-kunststoffpflege_ergebnis.jpg?v=1776370806\" alt=\"Satin-matt dashboard surface after Koch-Chemie Top Star Ts treatment, macro detail\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003ch3\u003eTop Star \"Ts\" or Plast Star Pss\u003c\/h3\u003e\n\n\u003cp\u003eIf you're after one plastic care product for everything, you quickly land on two Koch-Chemie products with similar names. The Top Star \"Ts\" is the interior specialist, the Plast Star Pss is the matching exterior product for bumpers, trim elements, wheel arches and unpainted exterior plastics.\u003c\/p\u003e\n\n\u003cp\u003eIf you're working inside and need a silicone-free care product with Daimler approval, grab the Top Star \"Ts\". If you want to bring black exterior trim back to deep black, grab the Plast Star Pss. If you want to care for both, combine the two — at Detailing1 there's also the 2-pack with both bottles.\u003c\/p\u003e\n\n\u003cp\u003eThe Top Star \"Ts\" comes in a 1000 ml spray bottle and in the 10-litre canister. The 1000 ml bottle is enough for about 80–100 interior applications — a year's supply for a two-car household. The 10-litre canister is meant for detailers and workshops that push 5 or more cars through a week. The target buyer isn't the Sunday cleaner but the detailing enthusiast and the car detailer who wants a subtle satin matt without the typical cockpit-spray gloss.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-top-star-ts-innenraum-kunststoffpflege_lineup_92478bdb-575d-430c-bda2-df8b594f521e.jpg?v=1776370806\" alt=\"Koch-Chemie Top Star Ts 1000ml and 10L canister in front of an open garage with a white Audi RS3\" loading=\"lazy\" width=\"1200\"\u003e","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":48484190388559,"sku":"D1-KCX-132001","price":17.49,"currency_code":"EUR","in_stock":true},{"title":"2x 1000ml","offer_id":49763996860751,"sku":"D1-KCX-132001_2","price":34.28,"currency_code":"EUR","in_stock":true},{"title":"3x 1000ml","offer_id":49763996893519,"sku":"D1-KCX-132001_3","price":50.9,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48484190421327,"sku":"D1-KCX-132010","price":160.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-top-star-innenraum-kunststoffpflege.png?v=1710622138"},{"product_id":"koch-chemie-wash-finish-wf-waterless-wash-detailer","title":"Wash \u0026 Finish \"Wf\" Waterless-Wash Detailer","description":"\u003ch2 data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eThe master of waterless car care is \u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKoch-Chemie's Wash \u0026amp; Finish \"Wf\" Waterless-Wash Detailer\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf you've been hunting for a fast, efficient, waterless way to clean your car, stop here. The \u003cstrong data-mce-fragment=\"1\"\u003eKoch-Chemie Wash \u0026amp; Finish Waterless-Wash Detailer\u003c\/strong\u003e is the one to grab for the exterior of lightly to moderately dirty cars. A real must-have for anyone who loves their car — it cleans, cares for and protects the paint in a single pass.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eQuick and easy to use\u003c\/strong\u003e: perfect on the go or between proper washes to give your car a glossy lift.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eGentle cleaning\u003c\/strong\u003e: clever cleaning and care components are kind to every surface they touch.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eGlossy finish\u003c\/strong\u003e: leaves a streak-free, water-repelling finish that not only shines but keeps any polish or wax you laid down underneath.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterless cleaning technology\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clever formula behind the \u003cstrong data-mce-fragment=\"1\"\u003eKoch-Chemie Wash \u0026amp; Finish Waterless-Wash Detailer\u003c\/strong\u003e lets you clean properly without a drop of water. That saves a valuable resource, and it's a lifesaver where water's restricted or when you just want a quick freshen-up between washes.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCare and protection in one step\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOn top of the clean, it lays down deep care and long-lasting protection on paint, glass, plastic trim and wheels. Watch your car come up fresh after every pass.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEasy enough for anyone\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsing the \u003cstrong data-mce-fragment=\"1\"\u003eKoch-Chemie Wash \u0026amp; Finish Waterless-Wash Detailer\u003c\/strong\u003e couldn't be simpler: mist it on, lift the dirt with a microfibre cloth, then buff it off with a second one. For really grubby spots, just go over them again.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"1000ml","offer_id":48484626923855,"sku":"D1-KCX-317001","price":12.99,"currency_code":"EUR","in_stock":true},{"title":"2x 1000 mL","offer_id":49725372399951,"sku":"D1-KCX-317001_2","price":25.46,"currency_code":"EUR","in_stock":true},{"title":"3x 1000 mL","offer_id":49725372432719,"sku":"D1-KCX-317001_3","price":37.8,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48484626956623,"sku":"D1-KCX-317010","price":94.99,"currency_code":"EUR","in_stock":true},{"title":"20 liters","offer_id":49603212345679,"sku":"D1-KCX-317020","price":169.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-wash-finish-quick-detailer.jpg?v=1710628390"},{"product_id":"koch-chemie-spray-sealant-s0-02-spruehversiegelung","title":"Spray Sealant \"S0.02\" Spray Sealant","description":"\u003ch2\u003e\u003cstrong\u003eKoch-Chemie Spray Sealant S0.02 — Spray Sealant\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie Spray Sealant S0.02\u003c\/strong\u003e is an \u003cstrong\u003eefficient spray sealant\u003c\/strong\u003e built for painted surfaces, so you get a high-gloss, hydrophobic layer of protection down fast and without the fuss. It leaves a \u003cstrong\u003esilky surface feel\u003c\/strong\u003e and visibly deepens the colour, giving your car that rich, freshly-done look. And it's not just about looks — you get cracking \u003cstrong\u003ebeading\u003c\/strong\u003e too, which keeps the paint protected and makes the next wash a lot easier.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick to apply\u003c\/strong\u003e: just mist it on and you're at a smooth, glossy finish with barely any effort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal colour depth\u003c\/strong\u003e: the paint picks up an intense colour pop that lifts the whole look of the car.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydrophobic protection\u003c\/strong\u003e: the strong beading keeps dirt and water off the paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eA glossy, hydrophobic layer for your car\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie Spray Sealant S0.02\u003c\/strong\u003e wins you over with how quickly it lays down a protective layer that pushes water and dirt away. Thanks to those hydrophobic properties the paint stays clean longer, because water and dirt just won't grab onto the surface. What you're left with is a gloss that lasts and cuts down on how often you have to fuss over the car.\u003c\/p\u003e\n\u003ch3\u003eEasy to use, big payoff\u003c\/h3\u003e\n\u003cp\u003eThis spray sealant isn't only for the pros — any car-care enthusiast can lay it down without a second thought. You simply mist it on and spread it out, which makes it a go-to for a fast paint seal. And you still get the benefits of a proper sealant, with none of the heavy prep work.\u003c\/p\u003e\n\u003ch3\u003eLasting protection against the elements\u003c\/h3\u003e\n\u003cp\u003eThanks to its quality sealant components, the \u003cstrong\u003eKoch-Chemie Spray Sealant S0.02\u003c\/strong\u003e gives you more than a quick shine — it protects the paint over the long haul too. With that \u003cstrong\u003elasting beading\u003c\/strong\u003e, your car stays glossy and clean longer, since dirt and water can barely hold on.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"500 ml","offer_id":49764225515855,"sku":"D1-KCX-427500","price":30.49,"currency_code":"EUR","in_stock":true},{"title":"2x 500ml","offer_id":49764225548623,"sku":"D1-KCX-427500_2","price":59.76,"currency_code":"EUR","in_stock":true},{"title":"3x 500ml","offer_id":49764225581391,"sku":"D1-KCX-427500_3","price":88.73,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":49764225614159,"sku":"D1-KCX-427005","price":111.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-spray-sealant-spruhversiegelung_500ml.jpg?v=1710629985"},{"product_id":"koch-chemie-quick-shine-qs-quick-detailer","title":"Quick \u0026 Shine \"Qs\" Quick Detailer","description":"\u003ch2\u003e\u003cstrong\u003eKoch-Chemie Quick \u0026amp; Shine \"Qs\" – Quick Detailer\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eKoch-Chemie Quick \u0026amp; Shine \"Qs\" is the go-to \u003cstrong\u003eall-round finishing spray\u003c\/strong\u003e when you want a quick, easy refresh on a car. It works on every smooth, painted surface — automotive paint, glass, plastic trim and stainless steel. In a single pass it cleans, cares for and protects the surface you wipe. On top of that it lays down a \u003cstrong\u003estreak-free gloss\u003c\/strong\u003e and pulls out a \u003cstrong\u003edeeper colour\u003c\/strong\u003e that makes the paint pop again.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and protect in one step\u003c\/strong\u003e – Saves you time and effort, since it cleans and seals the surface in one go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreak-free gloss\u003c\/strong\u003e – Leaves a deep, glossy, clean finish with none of those ugly smears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater- and dirt-repellent\u003c\/strong\u003e – The lotus effect means dirt and water just bead off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eQuick to use, dialled-in results\u003c\/h3\u003e\n\u003cp\u003eQuick \u0026amp; Shine is dead easy to work with: it wipes off fast and leaves no streaks. That makes it ideal for a fast refresh on showroom or trade-show cars. Even fingerprints and light grime wipe away without a fight.\u003c\/p\u003e\n\u003ch3\u003eDeeper colour and gloss\u003c\/h3\u003e\n\u003cp\u003eThe special formula feeds and protects the paint, giving you a striking jump in colour depth and a brilliant shine. Any polish or wax you laid down earlier stays put — so the paint gets an extra layer of protection without you having to seal it again.\u003c\/p\u003e\n\u003ch3\u003eUse it anywhere\u003c\/h3\u003e\n\u003cp\u003eQuick \u0026amp; Shine is a proper all-rounder: beyond car paint it works a treat on painted wood, plastic trim, musical instruments and stainless steel. It's the perfect fix for anyone after fast, professional care across all sorts of surfaces.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":48489102278991,"sku":"D1-KCX-168001","price":11.99,"currency_code":"EUR","in_stock":true},{"title":"2x 1000ml","offer_id":49764572102991,"sku":"D1-KCX-168001_2","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"3x 1000ml","offer_id":49764572135759,"sku":"D1-KCX-168001_3","price":34.89,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48489102311759,"sku":"D1-KCX-168010","price":98.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-quick-shine-quick-detailer.jpg?v=1710712596"},{"product_id":"koch-chemie-lack-polish-grun-p1-03-finish-politur","title":"Lack-Polish green \"P1.03\" Finishing Polish","description":"\u003ch2\u003eDeep gloss and paint protection in one step with the Koch-Chemie Lack-Polish green \"P1.03\" finishing polish\u003c\/h2\u003e\n\n\u003cblockquote\u003e\u003cem\u003eThe Koch-Chemie Lack-Polish green \"P1.03\" is a finishing polish with a cut level of 1.0 and a gloss level of 9.5 that refines as-new and freshly corrected paint of all kinds, clears holograms and light scratches, and protects against the elements at the same time — usable by machine or by hand, and Daimler-approved.\u003c\/em\u003e\u003c\/blockquote\u003e\n\n\u003cp\u003eIn the Koch-Chemie Polish System, the \u003cstrong\u003eLack-Polish green \"P1.03\"\u003c\/strong\u003e is the finishing product, full stop. With a cut level of 1.0 — the lowest in the whole range — and a gloss level of 9.5, it's built for exactly one job: pulling the deepest gloss and smoothest finish out of paint that's either as-new or already been corrected with cutting polishes. For dealerships getting new cars showroom-ready, and for detailers laying down the last finishing pass after a multi-stage polish, the P1.03 is the logical way to close things out.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut 1.0 \/ gloss 9.5 — the best of both worlds\u003c\/strong\u003e — The P1.03 has just enough bite to clear light holograms and polishing haze, but a good deal less than a classic cutting polish. What you get is a high-gloss finish that needs no further polishing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtection, care and refinement in one step\u003c\/strong\u003e — The formula carries nourishing components that shield the treated paint from harsh weather. No separate sealing step needed — for quick turnarounds, that's the more efficient call.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDaimler-approved and works on every paint type\u003c\/strong\u003e — The P1.03 suits all paint types, from modern scratch-resistant clearcoats to the softer original paint on older cars. The Daimler approval underlines how well it plays even with high-end OEM paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat the Lack-Polish green P1.03 does in the polishing process\u003c\/h3\u003e\n\u003cp\u003eThe P1.03 is the next step up from the proven P1.02. With the new version Koch-Chemie improved two things above all: colour depth and how easily it wipes off. That sounds like small tweaks, but day-to-day it makes a real difference: better colour depth means dark paint looks richer and deeper after the job — and with no extra work. Easier wipe-off means less elbow grease when you go back over it with the microfibre, and cleaner results even by hand.\u003c\/p\u003e\n\n\u003cp\u003eIn the Koch-Chemie Polish System the P1.03 is typically the third or final polishing step: step 1 (heavy correction with \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-heavy-cut-h9-02-grobe-schleifpolitur\"\u003eHeavy Cut H9.02\u003c\/a\u003e) → step 2 (fine correction with \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-fine-cut-f601-schleifpolitur-fein\"\u003eFine Cut F6.01\u003c\/a\u003e) → step 3 (finish with Lack-Polish green P1.03). On cars with only surface-level holograms, or on new vehicles, the P1.03 can also be run as the only polishing step.\u003c\/p\u003e\n\n\u003ch3\u003eHow to use it: by machine with a dual-action, optionally with rotary\u003c\/h3\u003e\n\u003cp\u003eYou apply the P1.03 by machine with a dual-action polisher and the matching Polish \u0026amp; Sealing Foam Pad Green — this green pad is set up in the Koch-Chemie colour system specifically for this polish. For maximum gloss with minimal correction, go with the soft green pad; if you want a touch more cut from the P1.03, switch to a harder pad, which bumps the cutting action up moderately. When you do want a stronger abrasive effect, the polish can also be run with a Fine Cut Pad on a rotary polisher.\u003c\/p\u003e\n\n\u003cp\u003eFor working by hand — on small areas, say, or with the \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-applikator-handpolierschwamm-puck\"\u003eKoch-Chemie hand polishing pad \"Puck\"\u003c\/a\u003e — the P1.03 works just as well. The formula is built so it spreads evenly and wipes off residue-free even when you lay it down by hand.\u003c\/p\u003e\n\n\u003ch3\u003eLack-Polish green P1.03 vs. Lack-Polish purple P2.03: who needs which?\u003c\/h3\u003e\n\u003cp\u003eIn the Koch-Chemie range the \u003ca href=\"https:\/\/detailing1.de\/products\/koch-chemie-lack-polish-violett-p2-03-abrasive-glanzpolitur\"\u003eLack-Polish purple P2.03\u003c\/a\u003e is a polish that offers more correction than the P1.03 at a cut level of 2.0. The choice between them is quick: for nothing more than light holograms on as-new paint, or as the final finishing step after a cutting polish, you reach for the green P1.03. If you want to correct light to medium scratches in one step and pull a high-gloss finish at the same time, grab the purple P2.03. For dealerships prepping new vehicles and chasing maximum gloss with minimal time, the P1.03 is the obvious pick — it works fast, has no real dwell time, and wipes off without fiddly rework.\u003c\/p\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Only use the P1.03 on paint that's already been cleaned and degreased — ideally after a prep pass with the Panel Preparation Spray PPS. That way you can see, before the final polish step, whether there are still holograms in the paint, and you can deal with them on the spot. It saves time and stops you laying a sealant over a surface that wasn't fully corrected.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eWho is the Lack-Polish green P1.03 the right pick for?\u003c\/h3\u003e\n\u003cp\u003eThe P1.03 is ideal for dealerships prepping new or demo cars day in, day out, who need a finishing product that works fast. For keen hobby detailers it's the perfect close to a multi-stage polish: after the heavy and fine cutting polishes, the P1.03 brings the paint up to that final showroom gloss without needing a separate sealing step. In the 1,000 ml size it's a sound buy for pro outfits and for home users working through several cars alike.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n  \u003ch2\u003eFrequently asked questions about the Lack-Polish green \"P1.03\" finishing polish\u003c\/h2\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhat is the Koch-Chemie Lack-Polish green P1.03 and what makes it special?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eThe Koch-Chemie Lack-Polish green P1.03 is a finishing polish with a cut level of 1.0 and a gloss level of 9.5 for all paint types. It refines as-new and freshly corrected paint, removes light holograms and polishing haze, and protects the treated surfaces from the elements — all in one pass. A firm favourite in dealerships for getting new vehicles presentation-ready in a hurry.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eHow do you use the Lack-Polish green P1.03 properly?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eApply the P1.03 by machine with a dual-action polisher and the Polish \u0026amp; Sealing Foam Pad Green as a thin film. Buff the polish residue to a high gloss with a clean Polish \u0026amp; Sealing Towel. Working by hand with a soft sponge is fine too. Shake before use, and don't use it on hot surfaces.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eLack-Polish green P1.03 vs. Lack-Polish purple P2.03 — what's the difference?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eThe green P1.03 (cut 1.0) is a pure finishing product for as-new paint, or paint already corrected after a cutting polish — maximum gloss, minimal abrasiveness. The purple P2.03 (cut 2.0) offers more correction and suits lightly to moderately weathered paint where light scratches still need to come out. For pure presentation prep: P1.03. For correction and finish in one step: P2.03.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhich paint types is the Lack-Polish green P1.03 suitable for?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eThe P1.03 suits all paint types — from modern scratch-resistant OEM clearcoats to the softer original paint on older cars. The Daimler approval confirms it plays well even with high-end factory paint. It's not meant as a cutting polish for deep scratches or heavy oxidation — that's where the Heavy Cut or Fine Cut polishes are the right call.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eDo I still need a sealant after the Lack-Polish green P1.03?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eNot necessarily. The P1.03 carries nourishing components that protect the paint from the elements. For short-term prep or presentation work, the polish's own protective effect is enough. For lasting long-term protection we'd recommend a ceramic coating or a hard wax after the P1.03 — first strip the polish residue off the paint with a degreaser (e.g. Panel Preparation Spray PPS).\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57635642376527,"sku":"D1-KCX-467001","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":57635624452431,"sku":"D1-KCX-467005","price":69.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-lack-polish-grun-p1-03-finish-politur_1000ml.jpg?v=1710777240"},{"product_id":"koch-chemie-active-foam-af-intensivschaum","title":"Active Foam \"Af\" Intensive Foam","description":"\u003ch2 id=\"speakable-headline\"\u003eLifting pollen, salt and Sahara dust off the paint before you ever touch it\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Koch-Chemie Active Foam Af? A highly concentrated pre-wash foam at pH 9.5, with anionic surfactants and VDA Class A certification — built for pro detailers and rollover car washes, where a thick, sandalwood-scented foam loosens the grime before the microfibre ever touches the paint. Not meant for the weekly maintenance wash over a carnauba wax — that's what the pH-neutral Gentle Snow Foam Gsf is for.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003eThis pre-wash is called \u003cstrong\u003eSnow Foam\u003c\/strong\u003e because it lays a thick blanket of foam over the car like snow. \u003cstrong\u003eKoch-Chemie Active Foam \"Af\"\u003c\/strong\u003e is a pre-wash concentrate out of Unna that works in the foam cannon, in the compressed-air pump sprayer, in the rollover wash and in the bucket. An extremely high share of secondary alkane sulfonates cuts through grease and road grime, sodium laureth sulfate builds the long-clinging foam structure, and a hydrotrope keeps the solution stable in the bottle.\u003c\/p\u003e\n\n\u003c!-- 📸 HERO: Hero-Bild Active Foam (1L vorne scharf, 5L Kanister hinten) — d1_koch-chemie-active-foam-af-intensivschaum_hero.png --\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThick foam that hangs on.\u003c\/strong\u003e The high SLES share builds a foam that detailers often describe as shaving-cream-like. On a vertical car door, Af clings for up to 5 minutes instead of running straight off — and in that window the surfactants drop the surface tension of the water from around 72 down below 30 mN\/m. Translated: the water creeps into every pore of dirt, encapsulates pollen and sand, and you rinse it all off touch-free.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVDA Class A at 1:100 and 5 minutes.\u003c\/strong\u003e Tested to VDA 621-412 across 24 hours of salt spray and 40 hours of condensation on paint, plastic, rubber, carbon and wheels. What that means for you: at the right dilution, Af won't attack the clear coat, the door rubbers or the black carbon diffuser. The moment you push past those limits, the guarantee is off.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne litre covers 30 bucket washes or 10 foam-cannon fills.\u003c\/strong\u003e At 1:300 in a hand wash, about 35 ml go into a 10-litre bucket. In the foam cannon you mix roughly 100 ml of concentrate into 900 ml of water. The 10 kg drum works out to over 100 foam-cannon fills on paper — that's the point where you start thinking in litres in the garage instead of in spray bottles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e We often see people mixing a flat 1:50 in the foam cannon, then wondering why the foam looks thin or why streaks stay on the paint. Here's why: your pressure washer dilutes the mix again at the nozzle — usually by a factor of 15 to 25, depending on flow rate. That's the so-called Panel Impact Ratio, PIR for short. Quick bucket test: spray 1 litre of water through the lance, then measure the total water in the bucket. If 20 litres come out, your machine has a PIR factor of 1:20 — so you only need a pre-dilution of 1:5 in the lance to land the VDA-compliant 1:100 on the paint. And don't work in the sun, don't let it dry on, or even the best maths won't save you.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFoam cannon, pre-diluted 1:10, three minutes' dwell time\u003c\/h3\u003e\n\u003cp\u003eThe classic application goes like this: car in the shade, paint dry or pre-rinsed, hook the foam cannon up to the pressure washer, pre-dilute the concentrate somewhere between 1:10 (winter, salt, baked-on brake dust) and 1:50 (summer, pollen, city grime) with warm water, and spray bottom to top.\u003c\/p\u003e\n\n\u003cp\u003eLet it dwell three to five minutes, then start at the top with the pressure washer and work down. Unlike the compressed-air pump sprayer — where the mix in the bottle is exactly the mix that hits the paint — the pressure washer adds water at the nozzle. In the pump sprayer the realistic dilution sits at 1:20 to 1:50, with no PIR effect, and the dwell time should run one to three minutes at most, or the foam dries on. The denser foam from the lance hangs longer, stays wet, and gives you the full five-minute window the VDA defines for Class A.\u003c\/p\u003e\n\n\u003cp\u003eIn the bucket you dose 1:300 — about 35 ml to 10 litres — and work with the microfibre mitt like you would with a regular shampoo. The upside over a classic pH-neutral car shampoo: the alkalinity breaks down baked-on summer grime and pollen film better. The downside: every contact wash with Af strips a little wax. If you're running a sealant, switch the contact phase over to the \u003ca href=\"\/products\/koch-chemie-gentle-snow-foam-gsf\"\u003eKoch-Chemie Gentle Snow Foam Gsf\u003c\/a\u003e, which is certified wax-safe at pH 7.5.\u003c\/p\u003e\n\n\u003cp\u003eWhat we see day-to-day: the most common beginner mistake isn't the dilution, it's rinsing from too close. High pressure from 30 to 40 centimetres is plenty — get the nozzle in to 5 centimetres and you mechanically grind pollen and sand into the clear coat instead of washing them away. The foam has done its job; now the water jet should only carry things off.\u003c\/p\u003e\n\n\u003c!-- 📸 ANWENDUNG: Daniel mit Schaumkanone an Auto, dichter Sandelholz-Schaum auf Lack — d1_koch-chemie-active-foam-af-intensivschaum_anwendung.png --\u003e\n\n\u003ch3\u003eCarnauba gives way. Ceramic doesn't.\u003c\/h3\u003e\n\u003cp\u003eAt pH 9.5, Active Foam Af is clearly more alkaline than a classic pH-neutral shampoo, but moderate next to Bilt Hamber Auto-Foam, which runs at pH 13 and tears wax down on contact. On intact ceramic coatings (SiO2, often pH-stable from 2 to 13) Af is harmless — plenty of detailers even reach for it deliberately to lift the traffic film that masks the coating's hydrophobic behaviour over time.\u003c\/p\u003e\n\n\u003cp\u003eWith carnauba waxes it's a different story. A rare, correctly diluted pre-wash inside the VDA window won't strip the wax. But stand at the foam cannon with Af every single week and you'll break down the protective layer measurably faster than with a pH-neutral foam. The day-to-day rule: sealant younger than three months plus a weekly wash, then hands off Af and switch to the Gentle Snow Foam. Sealant refreshed every six months, or a ceramic coating, and Af makes a sensible deep pre-wash between your maintenance washes.\u003c\/p\u003e\n\n\u003cp\u003eWhat Af also won't shift: deep-set mineral water spots — for those the acidic \u003ca href=\"\/products\/koch-chemie-reactivation-shampoo-rs\"\u003eKoch-Chemie Reactivation Shampoo Rs\u003c\/a\u003e is the right call, because it pulls limescale plugs out of the coating's pores. Baked-on bugs are too much for the foam as well. There you grab a dedicated bug remover locally, or the highly alkaline \u003ca href=\"\/collections\/universalreiniger\"\u003eKoch-Chemie all-purpose cleaner\u003c\/a\u003e from the green line. Active Foam is an excellent pre-cleaner, not a specialist for every kind of dirt.\u003c\/p\u003e\n\n\u003c!-- 📸 ERGEBNIS: Lack mit Wassersaitenmuster nach Spülung, sauber und matt-feucht glänzend — d1_koch-chemie-active-foam-af-intensivschaum_ergebnis.png --\u003e\n\n\u003ch3\u003eDetailers, car washes and ambitious home users\u003c\/h3\u003e\n\u003cp\u003eActive Foam Af comes out of Koch-Chemie's pro range in Unna, yellow-coded like all the wash-chemistry products and available in pack sizes up to the 210 kg barrel. In rollover washes and self-service bays Af is an industry standard, because the thick foam visually signals a premium wash and the sandalwood scent works as an argument for higher programme prices.\u003c\/p\u003e\n\n\u003cp\u003eFor the home user, Af pays off once the foam cannon is already hanging off a strong enough pressure washer — you have to physically work out the PIR once yourself, because every pump draws differently. The 1-litre bottle is the easy way in for a single car and lasts about three to four months on a fortnightly pre-wash. The 10 kg drum starts to pay from the second car on, or in the detailing hobby, because the per-litre price drops noticeably and you just decant the concentrate into an empty spray bottle.\u003c\/p\u003e\n\n\u003cp\u003eDetailers and workshops usually reach for the 21 kg or 210 kg pack, because at 3 to 8 millilitres of usage per car in a rollover system the unit cost runs towards nothing. The 210 kg barrel goes out by freight forwarder with us — and yes, Active Foam is phosphate- and NTA-free, so it's cleared for biological greywater treatment plants, which is a must for commercial wash lines on a closed water loop.\u003c\/p\u003e\n\n\u003cp\u003eIf you've moved into a sealant routine and mainly want to hold the hydrophobic effect, switch your maintenance wash to the pH-neutral \u003ca href=\"\/products\/koch-chemie-gentle-snow-foam-gsf\"\u003eGentle Snow Foam\u003c\/a\u003e and only pull the Active Foam out every few weeks for the deep pre-wash. If you keep an older car clean of everyday grime and have no wax layer to protect, you're better off with Af as your standard pre-cleaner than with any milder foam. In the current spring trend, where pollen and Sahara dust are measurably driving searches for car foam cleaner in the DACH region versus last year, this pre-wash logic matters more than ever.\u003c\/p\u003e\n\n\u003cp\u003eMaybe the most important Detailing1 note to finish on: the sandalwood scent isn't a marketing gimmick. Highly concentrated anionic surfactants smell sharp and biting on their own — the scent is an odour binder that makes working in enclosed spaces bearable. The fact that customers at wash lines link the smell with cleanliness and premium care and accept higher programme prices is the economic bonus layer on top. For your own garage it mainly means: ventilate well, don't work in a closed hall with no fresh air, and always label the spray bottle with its contents once you've decanted the concentrate from the 10 kg drum.\u003c\/p\u003e\n\n\u003c!-- 📸 LINEUP: Active Foam 1L + 10kg Kanister + Schaumkanone als Workflow-Stillleben — d1_koch-chemie-active-foam-af-intensivschaum_lineup.png --\u003e","brand":"Koch-Chemie","offers":[{"title":"1000ml","offer_id":49515049288015,"sku":"D1-KCX-282001","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"2x 1000 mL","offer_id":49670747390287,"sku":"D1-KCX-282001_2","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"3x 1000 mL","offer_id":49670747423055,"sku":"D1-KCX-282001_3","price":29.07,"currency_code":"EUR","in_stock":true},{"title":"10kg","offer_id":48762013548879,"sku":"D1-KCX-282010","price":48.49,"currency_code":"EUR","in_stock":true},{"title":"21kg","offer_id":49094689358159,"sku":"D1-KCX-282021","price":98.49,"currency_code":"EUR","in_stock":true},{"title":"210kg","offer_id":49094689390927,"sku":"D1-KCX-282210","price":1031.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-active-foam-af-intensivschaum.png?v=1726400580"},{"product_id":"koch-chemie-aktivwaesche-aw-aktiv-shampoo","title":"Aktivwäsche \"Aw\" Active Shampoo","description":"\u003ch2 id=\"speakable-headline\"\u003eAktivwäsche Aw works in the tunnel, in the lance and in the bucket\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Koch-Chemie Aktivwäsche Aw? A liquid active-shampoo concentrate from Unna that lifts traffic film, pollen and salt off your paint with anionic and non-ionic surfactants. Phosphate- and NTA-free, VDA Class A certified, cleared for biological process-water treatment. Not meant as a maintenance shampoo for fresh ceramic coatings, or for washing on private property.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Aktivwäsche Aw\u003c\/strong\u003e is a concentrated active shampoo from Koch-Chemie in Unna that runs out of the same canister in roll-over wash systems, tunnel washes and hand washing. The mix of anionic and non-ionic surfactants with re-fatting components cuts through road film thoroughly without drying out rubber and plastic. pH 7.5, almost neutral with a slightly alkaline kick. VDA Class A. Phosphate- and NTA-free. Suitable for biological process-water treatment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-aktivwasche-aw-aktiv-shampoo.png?v=1778757009\" alt='Koch-Chemie Aktivwäsche „Aw\" — active shampoo' loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne concentrate for three workflows.\u003c\/strong\u003e Roll-over wash system at 3 to 7 millilitres per car through the dosing pump, foam lance at 1:10 to 1:30 in the supply tank, hand bucket at 50 millilitres to 10 litres of water. So one canister covers three completely different detailing worlds — the bay, the tunnel, the Sunday wash in the garage, all out of the same container.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVDA Class A means: no material damage.\u003c\/strong\u003e The strictest compatibility certification in the German automotive industry. Anodised aluminium trim, clear coat, polycarbonate headlights and piano-black plastic aren't attacked or bleached out when you use it right. For wash-bay operators that means liability cover with customers who run OEM-sensitive wheels or as-new black-panel surfaces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEconomical, if you think in bulk.\u003c\/strong\u003e An 11 kg canister gives you over 200 hand-bucket washes or more than 2,000 wash-system runs at 5 millilitres each. The 21 kg keg pays off for detailers from the first quarter, the 210 kg container for wash-system operators pushing three-digit daily throughput. Phosphate- and NTA-free also means: fully compatible with biological process-water loops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e What we see day-to-day is that Aktivwäsche Aw often gets dosed wrong. Overdose it and you get a sticky dry residue on the paint, not better gloss. 50 millilitres to 10 litres of water is the mark where micelle formation runs clean: at that concentration the surfactant molecules form little foam spheres that capsule the dirt and carry it off when you rinse. Lukewarm water instead of cold speeds up the surfactant work without tipping the dry time. More is counterproductive, less doesn't cut it.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e50 millilitres to 10 litres of water. Then Aw works.\u003c\/h3\u003e\n\u003cp\u003eAktivwäsche Aw runs on three clear dose rates, and which one you need comes down to the workflow, not taste. In the roll-over wash system, 3 to 7 millilitres per car go straight through the dosing pump into the water concentrate. In the foam lance you mix the concentrate in the supply tank at 1:10 to 1:30. In the hand bucket, 50 millilitres to 10 litres of water is enough — that's the 1:200 dilution Koch-Chemie lists on every product data sheet for the Aktivwäsche.\u003c\/p\u003e\n\n\u003cp\u003eBefore the first bucket, you roll the car into the shade and let it cool down. Aw flashes off on hot paint within seconds, and the dry residue is a pain to rinse off afterwards. Loose grit comes off first with the pressure washer — sand and brake dust have no business in your wash mitt. Then two \u003ca href=\"\/products\/koch-chemie-detailing-bucket-wascheimer-20l\"\u003ewash buckets\u003c\/a\u003e with grit guards side by side, one for the shampoo solution, one with clean water to rinse out the mitt.\u003c\/p\u003e\n\n\u003cp\u003eYou wash top to bottom, panel by panel. Roof first, sills last. After each panel wring the mitt out in the rinse bucket, then load up on shampoo again. Important: don't soap up the whole car — work panel by panel and rinse straight off with clean water. Aw is fast, but once the foam dries on you're starting half the panel over.\u003c\/p\u003e\n\n\u003cp\u003eTo dry, a thick microfibre towel around 950 gsm or the leaf blower. Both keep off the limescale marks that show up half an hour later when water droplets run down and evaporate. If you want to freshen the car up on top of that, follow Aw with a second cleaning workflow from the \u003ca href=\"\/collections\/autoshampoo\"\u003eshampoo category\u003c\/a\u003e — pre-wash, snow foam or quick detailer, depending on what the car needs. Aw is the base, not the finish.\u003c\/p\u003e\n\n\u003cp\u003eIf you're running the foam lance, you mix Aw into the supply tank beforehand. The exact dilution depends on the foam insert and the water pressure — we start at 1:20 and dial it in after the first pass. Too thin means no all-over foam that clings long enough. Too thick means the concentrate drips off as a syrupy film and streaks later. Visual cue: the foam should sit on paint and glass for around 60 to 90 seconds, then come off top-down with the pressure washer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-aktivwasche-aw-aktiv-shampoo.png?v=1778757009\" alt='Koch-Chemie Aktivwäsche „Aw\" in use in the bucket' loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAw attacks coatings. In the driveway it stays in the canister.\u003c\/h3\u003e\n\u003cp\u003eAt pH 7.5 Aktivwäsche Aw is almost neutral, but it carries a slightly alkaline kick — which is exactly what you want when the paint needs to be stripped clean before polishing or sealing. That same kick, though, attacks existing coatings, wax layers and SiO2 sealants over time. If you want to maintain a fresh ceramic coating rather than strip it, reach for Koch-Chemie NanoMagic Shampoo Nms at a mild-acidic pH 5.5, or the Glanzwachsshampoo Gw with wax content. Aw is the tool for cleaning, not for preserving.\u003c\/p\u003e\n\n\u003cp\u003eThe second limit is the dry time. Detailers abroad describe Aw as „tricky to finish washing the whole car before the concentrate dries on the paint\". That's true: in direct sun, on hot metal or at outside temperatures over 25 °C, Aw runs out of headroom. Shade, cool metal and working panel by panel aren't a suggestion, they're a must. Skip that and you pick up streaks and, in the worst case, spot etching on horizontal surfaces.\u003c\/p\u003e\n\n\u003cp\u003eThe third limit is legal: even though Aw is phosphate- and NTA-free and supports biological process-water treatment, washing a car with shampoo on private property is banned under the German Water Resources Act. The issue isn't the surfactants but the oil, brake dust and tar residue that would run into the groundwater with the rinse water. That's why Aw is only allowed at self-service bays with an oil separator or at wash systems with a process-water loop. Fines run into five figures depending on the state.\u003c\/p\u003e\n\n\u003cp\u003eIf you want to maintain an active ceramic sealant, reach for a mild maintenance shampoo from the \u003ca href=\"\/collections\/koch-chemie\"\u003eKoch-Chemie line\u003c\/a\u003e. If you can wash commercially or in a self-service box, Aw is the right tool. If you're parked privately in the driveway, Aw is the wrong product legally — no judgement, just the legal frame you should know before you crack the canister open.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-aktivwasche-aw-aktiv-shampoo.png?v=1778757009\" alt='Koch-Chemie Aktivwäsche „Aw\" — clean paint after the wash' loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAw is a concentrate for detailers and wash-system operators.\u003c\/h3\u003e\n\u003cp\u003eAktivwäsche Aw is built for three types of user. Professional detailers who need a reliable paint pre-clean between polishing stations and sealing work, without the next week's coating layer getting attacked. Wash-system operators and fleet managers who have to cost it out at cents per vehicle and still want VDA Class A. And hobby pros with a workshop streak who work at the self-service bay or with their own lift and want one concentrate to last for years.\u003c\/p\u003e\n\n\u003cp\u003eAw is less of a fit for the classic Sunday washer in the driveway — both practically (dry time too short, uncontrollable without shade) and legally (Water Resources Act). If you're allowed to wash privately in the driveway because your local bylaw permits it in your area, check the local rules — they aren't uniform, they differ by state and municipality. When in doubt, take the wash to a self-service bay.\u003c\/p\u003e\n\n\u003cp\u003eThe 11 kg canister is the entry point for professional detailers with a single site. At one hand wash of a single vehicle a week, the container lasts around four years — in practice that means the concentrate rarely runs out, it ages first. The 21 kg keg pays off from the second detailing site or at higher workload. The 210 kg container is the wash-system size for tunnels with three-digit daily throughput.\u003c\/p\u003e\n\n\u003cp\u003eAw isn't a wow-gloss shampoo. It's the tool that preps the paint right on the mark for the next layer — whether that's a coating, a hot wax or simply clean dryness. Use Aw and put nothing on afterwards, and you're leaving performance on the table. That's pro logic: get it properly clean first, then put down exactly what you want. Aw handles the dirty part of the wash reliably, the rest hangs on the workflow that follows.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-aktivwasche-aw-aktiv-shampoo.png?v=1778757009\" alt='Koch-Chemie Aktivwäsche „Aw\" — 11 kg, 21 kg and 210 kg sizes at a glance' loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n","brand":"Koch-Chemie","offers":[{"title":"11kg","offer_id":48762024755535,"sku":"D1-KCX-10011","price":44.99,"currency_code":"EUR","in_stock":true},{"title":"21kg","offer_id":49382268731727,"sku":"D1-KCX-10021","price":74.49,"currency_code":"EUR","in_stock":true},{"title":"210kg","offer_id":49382268764495,"sku":"D1-KCX-10210","price":745.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-aktivwasche-aw-aktiv-shampoo.png?v=1778757009"},{"product_id":"koch-chemie-cosmo-clean-cs-sicherheitsbodenreiniger-konzentrat","title":"Cosmo-Clean \"Cc\" Safety Floor Cleaner Concentrate","description":"\u003ch2\u003eCommercial floor cleaning with no compromise — with the Koch-Chemie Cosmo-Clean \"Cc\" Safety Floor Cleaner Concentrate\u003c\/h2\u003e\n\n\u003cblockquote\u003e\u003cem\u003eThe Koch-Chemie Cosmo-Clean \"Cc\" is a highly concentrated, mildly alkaline safety floor cleaner concentrate for workshop, industrial and building floors — low-foaming, NTA- and solvent-free, with a slip-resistant effect on floors that are still wet and gentle on existing floor sealants. Dilution rate 1:40 to 1:300 depending on how dirty the floor is.\u003c\/em\u003e\u003c\/blockquote\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHighly concentrated with a dilution rate of 1:40 to 1:300\u003c\/strong\u003e — goes a seriously long way; one 11 kg canister covers many hundreds of square metres of floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlip-resistant on wet floors\u003c\/strong\u003e — far less slip risk on wet surfaces than you get with standard floor cleaners.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWon't attack floor sealants\u003c\/strong\u003e — the mildly alkaline formula is gentle on existing epoxy coatings and sealants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sets the Cosmo-Clean apart from ordinary floor cleaners\u003c\/h3\u003e\n\u003cp\u003eWorkshop and industrial floors take a beating: oils, lubricants, tyre rubber, brake dust and industrial residues build up into stubborn films that push everyday cleaners past their limit. The \u003cstrong\u003eKoch-Chemie Cosmo-Clean \"Cc\"\u003c\/strong\u003e was built for exactly this commercial-grade load. The mildly alkaline formulation cuts through grease, oil and dirt residue without harsh solvents — NTA-free and with no halogenated compounds. That's not just an eco win: solvent-free cleaners play far better with light-liquid separators, which is often a hard requirement in commercial workshops and industrial halls. The chosen mix of wash-active agents and phosphates still delivers outstanding cleaning power even at high dilution.\u003c\/p\u003e\n\n\u003ch3\u003eDilution ratios and where you'll use them day-to-day\u003c\/h3\u003e\n\u003cp\u003eThe Cosmo-Clean's strength is just how far you can dilute it: on lightly soiled office and admin floors you mix the concentrate 1:60 to 1:300 — a sparing dose that makes the 11 kg canister go even further. For heavily soiled workshop and industrial floors, Koch-Chemie recommends a 1:40 to 1:120 dilution for machine or manual cleaning. So you dial in the dose to match how dirty the floor is, no swapping products. Using it couldn't be simpler: lay the concentrate down on the surface, let it dwell depending on the dirt, then rinse off with a scrubber-drier, a steam jet or a pressure washer.\u003c\/p\u003e\n\n\u003ch3\u003eSafety aspects — what \"safety cleaner\" actually means\u003c\/h3\u003e\n\u003cp\u003eThe term \"safety floor cleaner\" isn't marketing fluff, it's a technical classification: the product is fast-separating to ÖNORM 5105 and therefore suited to wastewater systems with light-liquid separators. In a car workshop or industrial hall that's often a legal requirement — cleaners mustn't overload the oil separator with surfactant concentrates. The Cosmo-Clean meets those requirements. The slip-resistant effect is another safety factor: floors that are still wet are a real accident risk when you're working with other cleaners — the Cosmo-Clean cuts that risk right down thanks to its special formulation.\u003c\/p\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e For detailing shops, the Cosmo-Clean really shines for cleaning the floor after polishing work, once polishing dust has settled onto it. The low-foaming formula also makes it a great match for scrubber-driers — no foam overflow inside the machine. Mixing it up in a dosing sprayer makes it easier to lay down evenly across big areas.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eCosmo-Clean vs. Green Star — when to reach for which?\u003c\/h3\u003e\n\u003cp\u003eAlongside the Cosmo-Clean, the Koch-Chemie range also offers the Green Star BMP as an all-purpose cleaner. The difference comes down to where you use them: the Cosmo-Clean is built specifically for floor cleaning — mildly alkaline, slip-resistant and gentle on floor sealants. The Green Star is a broader all-purpose cleaner — for vehicle surfaces, engines, wheels and floors, but without that specific slip-resistant property. If you only clean floors and have to meet safety requirements (ÖNORM, light-liquid separators), the Cosmo-Clean is the one to grab.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Koch-Chemie Cosmo-Clean the right pick for?\u003c\/h3\u003e\n\u003cp\u003eThe Cosmo-Clean is aimed at car workshops, dealerships, detailing businesses and industrial operations that regularly clean large floor areas and have to keep an eye on both cleaning power and legal wastewater requirements. The 11 kg container is built for regular commercial use. Its high dilutability makes the Cosmo-Clean more economical in the long run than cheaper cleaners with lower concentration.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n  \u003ch2\u003eFrequently asked questions about the Cosmo-Clean \"Cc\" safety floor cleaner\u003c\/h2\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhat is the Koch-Chemie Cosmo-Clean and what is it used for?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eThe Koch-Chemie Cosmo-Clean is a highly concentrated, mildly alkaline safety floor cleaner for workshop, industrial and building floors. It cuts through oils, lubricants and stubborn industrial grime, is NTA- and solvent-free and fast-separating to ÖNORM 5105 — suited to systems with light-liquid separators.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eHow do you dilute the Cosmo-Clean correctly?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eWorkshop and industrial floors: dilute the concentrate 1:40 to 1:120 and apply by hand or machine. Office and admin floors: dilute 1:60 to 1:300. Before using it for the first time on a new floor covering, check compatibility on a small spot.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWill Cosmo-Clean attack floor sealants or epoxy coatings?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eNo — the mildly alkaline formulation is gentle on most floor sealants and epoxy coatings. Even so, it's worth running a compatibility check on unfamiliar floor surfaces, since coating compositions can vary a lot.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eIs Cosmo-Clean suitable for light-liquid separators?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eYes — Cosmo-Clean is fast-separating to ÖNORM 5105 and therefore suited to commercial systems with light-liquid separators. That's a common legal requirement for cleaners in car workshops and industrial halls.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eIs Cosmo-Clean worth it for smaller workshops too?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cp itemprop=\"text\"\u003eYes. With its high concentration and a dilution rate of up to 1:300, an 11 kg canister lasts a very long time even in smaller operations. The cost per square metre of cleaned floor is far lower than with low-concentration ready-to-use cleaners. For private users with no commercial wastewater requirements, though, the Cosmo-Clean is overkill.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Koch-Chemie","offers":[{"title":"11kg","offer_id":57635641393487,"sku":"D1-KCX-193011","price":48.99,"currency_code":"EUR","in_stock":true},{"title":"22kg","offer_id":57635641459023,"sku":"D1-KCX-193022","price":87.49,"currency_code":"EUR","in_stock":true},{"title":"235 kg","offer_id":57635623633231,"sku":"D1-KCX-193235","price":895.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-cosmo-clean-cs-sicherheitsbodenreiniger-konzentrat_11kg.png?v=1714739947"},{"product_id":"koch-chemie-felgenblitz-saurefrei-fb-felgenreiniger","title":"Felgenblitz säurefrei \"Fb\" wheel cleaner","description":"\u003ch2\u003e\u003cstrong\u003eKoch-Chemie Felgenblitz säurefrei \"Fb\" – wheel cleaner\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie Felgenblitz säurefrei \"Fb\"\u003c\/strong\u003e is a properly strong \u003cstrong\u003ewheel cleaner\u003c\/strong\u003e for every kind of wheel finish. The formula cuts through baked-on grime — brake dust, road film and flash rust — without touching the surface underneath. Being acid-free, it stays gentle on the material, so it works on any wheel you throw at it: alloy, steel or chrome. The clever bit is the colour-change indicator: the cleaner turns red as it pulls the dirt out, telling you exactly when it's ready to rinse off.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcid-free clean\u003c\/strong\u003e: gentle on the wheel finish, no damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in colour indicator\u003c\/strong\u003e: the colour shift shows you the dwell time so you nail the rinse moment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks everywhere\u003c\/strong\u003e: good for all wheel types — alloy, steel, chrome and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eA deep clean for spotless wheels\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFelgenblitz\u003c\/strong\u003e goes hard on stubborn build-up. Thanks to the acid-free formula it lifts brake dust, road film and rust particles with no fuss. It does it gently too, so even delicate finishes come through fine. Use it for a regular refresh or for a proper deep clean on wheels that are really caked.\u003c\/p\u003e\n\u003ch3\u003eUsing the colour-change function\u003c\/h3\u003e\n\u003cp\u003eThe built-in colour change is the standout feature of the \u003cstrong\u003eKoch-Chemie Felgenblitz säurefrei\u003c\/strong\u003e. Once it's on the wheels, a visible colour shift tells you the dirt has lifted and you can rinse. That keeps the job precise and saves you leaving it on the wheels longer than it needs.\u003c\/p\u003e\n\u003ch3\u003eGentle on the material, good on anything\u003c\/h3\u003e\n\u003cp\u003eThe acid-free formula behind the \u003cstrong\u003eFelgenblitz\u003c\/strong\u003e gives you a \u003cstrong\u003egentle clean\u003c\/strong\u003e across all the usual wheel types. Alloys, steels, chromed or polished wheels — it shifts even stubborn grime without attacking the material. That makes it a solid pick if you want your wheels gleaming without gambling on material compatibility.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"11kg","offer_id":48762229850447,"sku":"D1-KCX-218011","price":101.99,"currency_code":"EUR","in_stock":true},{"title":"19 kg","offer_id":49671312998735,"sku":"D1-KCX-218019","price":159.49,"currency_code":"EUR","in_stock":true},{"title":"220 kg","offer_id":49671313162575,"sku":"D1-KCX-218220","price":1947.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-felgenblitz-saurefrei-fb-felgenreiniger_11kg.png?v=1714750926"},{"product_id":"koch-chemie-glanzwachsshampoo-gw-autoshampoo-versiegelung","title":"Glanzwachsshampoo \"Gw\" car shampoo with sealant","description":"\u003ch2\u003eKoch-Chemie Glanzwachsshampoo \"Gw\" – car shampoo with sealant\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e Koch-Chemie Glanzwachsshampoo \"Gw\"\u003c\/strong\u003e is a proper all-rounder for washing your car. This \u003cstrong\u003ephosphate- and NTA-free\u003c\/strong\u003e shampoo blends cationic and non-ionic surfactants for a gentle but thorough clean. On top of cleaning, it protects the paint and helps it dry faster — the water film breaks up the moment you rinse it off. It's made for hand washing and is \u003cstrong\u003eVDA-compliant Class A\u003c\/strong\u003e and \u003cstrong\u003eDaimler-certified\u003c\/strong\u003e. Thanks to the built-in \u003cstrong\u003epreservation component\u003c\/strong\u003e, the paint gets cared for and sealed while you wash, for extra gloss and protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection and gloss\u003c\/strong\u003e: cleans and seals the paint in one step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast drying\u003c\/strong\u003e: the water film breaks up straight away, so the car dries quicker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGentle clean\u003c\/strong\u003e: phosphate- and NTA-free, for a more eco-friendly wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eThorough, gentle paint care\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Glanzwachsshampoo \"Gw\" from Koch-Chemie wins you over with a gentle formula built for hand washing. The mix of cationic and non-ionic surfactants doesn't just pull dirt off effectively — it looks after the paint while it does it. That keeps swirls at bay and holds onto your car's natural gloss.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCare and seal in one step\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eWhat sets this shampoo apart is that it seals the paint while you wash. That cuts out a separate sealant after the wash and saves you real time. The preservation agents lay a protective film over the paint, so the gloss layer holds up longer and shields the car from the elements.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSpotless drying, every time\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eAnother plus is how much faster it dries. Once you rinse, the water film breaks up right away, which keeps water spots to a minimum. That's a real help when you're washing in full sun or in the heat, since it cuts down on limescale marks too.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"10kg","offer_id":48762318618959,"sku":"D1-KCX-46010","price":61.99,"currency_code":"EUR","in_stock":true},{"title":"21kg","offer_id":49723586445647,"sku":"D1-KCX-46021","price":113.49,"currency_code":"EUR","in_stock":true},{"title":"210kg","offer_id":49723586478415,"sku":"D1-KCX-46210","price":1178.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-glanzwachsshampoo-gw-aufriss-shampoo_10kg.png?v=1714747425"},{"product_id":"koch-chemie-glass-cleaner-gc-glasreiniger","title":"Glass Cleaner \"Gc\" Glass Cleaner","description":"\u003ch2 id=\"speakable-headline\"\u003eCleaning car glass streak-free, inside and out\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Glass Cleaner \"Gc\"? A ready-to-use, alcohol-free car glass cleaner that pulls oil, grease, bug splatter and nicotine film off the glass streak-free, inside and out and on tinted windows too. Not meant as washer fluid for your reservoir and not as an anti-fog coating.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Glass Cleaner \"Gc\"\u003c\/strong\u003e is a ready-to-use glass cleaner from Koch-Chemie for car windows and every smooth surface, and it works without alcohol and without ammonia. If you want a \u003cstrong\u003ecar glass cleaner\u003c\/strong\u003e, you really want one thing: no streaks. That is exactly what the gloss-and-glide additive is for. It cuts the friction of the microfibre on the glass, so the cloth glides instead of dragging, and the fine streaks you get on the dry wipe just don't show up.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStreak-free thanks to the glide additive.\u003c\/strong\u003e The additive lowers how much the cloth grips, so the dry wipe leaves no micro-streaks. Day-to-day, 1 spray per half of the window is plenty. One verified customer told us she gets \"streak-free car windows\" and \"doesn't need much of the stuff\".\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0 percent alcohol, 0 percent ammonia, safe on tinted glass.\u003c\/strong\u003e Because the formula skips alcohol and ammonia, it won't attack tint film or coated displays. So you use 1 bottle for both sides, inside on the tinted side window and outside on the windscreen.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReady to use, no mixing.\u003c\/strong\u003e The 1-litre spray head is good to go straight away, no diluting, no measuring. For heavy users, detailers and fleets the same cleaner comes in 10, 20 and 200-litre containers, which drops the price per litre noticeably.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-glass-cleaner-gc-glasreiniger_hero.png?v=1780006588\" alt=\"Koch-Chemie Glass Cleaner Gc glass cleaner 1 litre in front of a dark sports car\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eMore than 5 verified customer reviews on Trusted Shops confirm the streak-free result in daily use.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Streaks almost never come from the cleaner, they come from technique. We often get messages like \"the glass cleaner leaves streaks\". Usually the wiping happened on a warm pane in the sun, where the film flashes off before the cloth lifts it. Work on a cold pane in the shade and go by the two-cloth rule: lift the dirt with 1 damp cloth, then buff dry in straight passes with a dry glass cloth. More product doesn't clean better, it tends to leave edges.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSpray it on neat, pull it off streak-free with two cloths\u003c\/h3\u003e\n\u003cp\u003eYou spray the Glass Cleaner \"Gc\" on neat from 20 to 30 cm onto the cold, shaded pane and pull it off with a dry microfibre glass cloth in straight passes. That way no film of water is left standing to flash off.\u003c\/p\u003e\n\u003cp\u003eOutside, the cleaner lifts bug splatter, pollen and the greasy road film. With a baked-on bug front, let the cleaner soak for about 30 seconds and only then pull it off, rather than scrubbing harder. That goes easy on the glass and on the wiper blades.\u003c\/p\u003e\n\u003cp\u003eInside, it's about the greasy film off-gassing from the dash and about nicotine. If you want to \u003cem\u003eclean your car windows from the inside\u003c\/em\u003e, spray sparingly onto the cloth rather than straight onto the glass, so no mist drifts onto a display or a vent. With a \u003ca href=\"\/products\/the-rag-company-diamond-280-gsm-mikrofaser-glastuch\"\u003emicrofibre glass cloth\u003c\/a\u003e especially, the cloth quality decides whether the loosened dirt gets picked up or just smeared around.\u003c\/p\u003e\n\u003cp\u003eThe second, bone-dry pass over the finished pane lifts the last haze out. That's exactly the step most people skip, and that's exactly where you get the streaks you spot later in backlight. A good glide additive makes the difference here between any old cleaner and a real car glass cleaner.\u003c\/p\u003e\n\u003cp\u003eWhy the cold pane? The additive only works its glide as long as the film is liquid. On hot glass the water flashes off too fast, the cleaner grabs and the cloth just pushes the dirt around. In the shade or early in the morning you've got that window of time. Wash new microfibre cloths once without softener before they ever touch glass too, otherwise they carry sizing onto it that pulls streaks all by itself.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-glass-cleaner-gc-glasreiniger_anwendung.png?v=1780006597\" alt=\"Koch-Chemie Glass Cleaner Gc being sprayed on a car window and pulled off with a microfibre cloth\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat the Gc is built for and what it isn't\u003c\/h3\u003e\n\u003cp\u003eThe Gc cleans glass, it doesn't seal it and it doesn't belong in the washer reservoir. As a pure spray-and-wipe cleaner it replaces neither the antifreeze washer fluid in the reservoir nor a hydrophobic glass sealant for the beading effect.\u003c\/p\u003e\n\u003cp\u003eWith heavily baked-on residue, 1 pass isn't always enough. One verified customer puts it well: with stubborn dirt you need 2 to 3 passes rather than scrubbing under pressure. A short soak and another pull is gentler and quicker in the end, because you avoid scratches you'd have to polish out later.\u003c\/p\u003e\n\u003cp\u003eAnti-fog protection is something the Gc deliberately leaves out. It gets you clean, clear glass, but against fogging from the inside only an anti-fog treatment helps for the long run. Clean glass does fog up far more evenly though, and so far less of a bother than a greasy film.\u003c\/p\u003e\n\u003cp\u003eBeyond the car the Gc cleans mirrors, interior and exterior, motorcycle visors, instrument glass and smooth surfaces around the house like tiles or stainless steel. The only place to be careful is on matte anti-glare nav and instrument displays: there you always spray onto the cloth and work with little pressure, so the coating doesn't suffer. On clear glass and glossy plastic headlights it works with no restrictions.\u003c\/p\u003e\n\u003cp\u003eIn a smoker's car a tacky nicotine film settles on the inside glass, scattering the light and making everything look yellowed. Here you work in 2 layers: lift and roughly take it off first, then buff dry with a fresh cloth. After that first thorough clean a normal pass later is enough to keep the view clear.\u003c\/p\u003e\n\u003cp\u003eIf you want to work ready-to-use and stay film- and tint-safe, the Gc is the right call. If instead you want an economical concentrate to dilute yourself with a Daimler factory approval, the \u003ca href=\"\/products\/koch-chemie-glas-star-gla-glasreiniger-konzentrat\"\u003eglass cleaner concentrate\u003c\/a\u003e is the fitting alternative.\u003c\/p\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDecision\u003c\/th\u003e\n\u003cth\u003eGlass Cleaner \"Gc\"\u003c\/th\u003e\n\u003cth\u003eGlas Star \"Gla\"\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eForm\u003c\/td\u003e\n\u003ctd\u003eready to use, spray and wipe\u003c\/td\u003e\n\u003ctd\u003econcentrate, dilute yourself\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003ealcohol-free, ammonia-free\u003c\/td\u003e\n\u003ctd\u003ealcohol-based\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStrength\u003c\/td\u003e\n\u003ctd\u003efilm- and tint-safe, ready straight away\u003c\/td\u003e\n\u003ctd\u003eDaimler factory approval, very economical\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWho for\u003c\/td\u003e\n\u003ctd\u003eclear view with no mixing\u003c\/td\u003e\n\u003ctd\u003eheavy users who want to drop the price per litre\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-glass-cleaner-gc-glasreiniger_ergebnis.png?v=1780006606\" alt=\"Streak-free car window with a clear reflection after cleaning with Koch-Chemie Glass Cleaner Gc\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFor a clear view day-to-day, from commuter to fleet\u003c\/h3\u003e\n\u003cp\u003eA good car glass cleaner has to work inside and out, and that's exactly what makes the Gc the everyday cleaner for anyone who wants clear glass fast with no mixing. The commuter grabs the 1-litre bottle, the detailer the 10 or 20-litre container.\u003c\/p\u003e\n\u003cp\u003eGlass cleaners are in highest demand in spring: pollen and bug season drives demand about 40 percent over the quiet winter level. If you've got a bottle in the boot now, you clean the windscreen on the road instead of driving into the low sun with a pollen film and streaks.\u003c\/p\u003e\n\u003cp\u003eDay-to-day the difference shows in the details: no streaks in backlight, no haze on the inside glass that turns oncoming headlights into stars at night. If you drive a lot with the sun low or in the dark, you notice a streak-free pane straight away.\u003c\/p\u003e\n\u003cp\u003eThe Gc is fuss-free on cost: 1 litre ready-to-use lasts many weeks of commuter life depending on how much you spray, and decanting the 10-litre container into a spray bottle costs you far less per litre. Store the cleaner frost-free and the spray function stays reliable across the whole shelf life. An opened bottle in the car survives the summer heat better if it isn't left baking in full sun all the time.\u003c\/p\u003e\n\u003cp\u003eHow often you clean depends on your driving: if you commute daily, keep the windscreen clear inside about every 2 weeks and outside as needed with pollen or bugs. High-mileage drivers and detailers with several cars a day get the most out of the big container and a spray bottle fixed to the trolley. That turns reaching for the car glass cleaner into routine rather than the exception.\u003c\/p\u003e\n\u003cp\u003eThe one trick hardly anyone does and that stops most streaks: clean the inside first, then the outside, and pull horizontally inside, vertically outside. If a streak is left after cleaning, the direction tells you straight away whether it's on the inside or the outside, and you only fix it there. That saves you the third pass and the guessing. You'll find the matching workflow and more products in the \u003ca href=\"\/collections\/glasreiniger\"\u003eglass cleaner\u003c\/a\u003e category.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-glass-cleaner-gc-glasreiniger_lineup.png?v=1780006614\" alt=\"Koch-Chemie Glass Cleaner Gc 1 litre and 10 litre containers side by side\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":48762336215375,"sku":"D1-KCX-302001","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48762336248143,"sku":"D1-KCX-302010","price":46.99,"currency_code":"EUR","in_stock":true},{"title":"20 liters","offer_id":49603176825167,"sku":"D1-KCX-302020","price":84.49,"currency_code":"EUR","in_stock":true},{"title":"200 liters","offer_id":49603176857935,"sku":"D1-KCX-302200","price":886.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-glass-cleaner-gc-glasreiniger.png?v=1714748313"},{"product_id":"koch-chemie-green-star-bmp-gsb-universalreiniger","title":"Green Star BMP \"Gsb\" All-Purpose Cleaner","description":"\u003cp\u003eA highly concentrated, low-foaming, mildly alkaline all-purpose cleaner that's free of phosphates, solvents and NTA — built for machine and hand cleaning of workshop, industrial and office floors. It won't attack existing floor sealants or coatings. Thanks to its high dirt- and oil-carrying capacity and top-tier material compatibility, it's also spot-on for the pre-wash and engine wash of cars and trucks, plus machine and workpiece cleaning. It carries re-greasing additives and temporary corrosion protection. Works great in biological process-water treatment plants too. Carries Daimler approval. VDA-compliant Class A: dwell time max. 5 min, max. application concentration 1:2.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"11kg","offer_id":48762370687311,"sku":"D1-KCX-66011","price":65.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-green-star-bmp-gsb-universalreiniger_11kg.png?v=1714926658"},{"product_id":"koch-chemie-insect-dirt-remover-idr-insekten-schmutzentferner","title":"Insect \u0026 Dirt Remover \"Idr\" Insect \u0026 Dirt Remover","description":"\u003ch2\u003e\u003cstrong\u003eKoch-Chemie Insect \u0026amp; Dirt Remover „Idr” – The reliable insect \u0026amp; dirt remover\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie Insect \u0026amp; Dirt Remover\u003c\/strong\u003e is your go-to for shifting even the most stubborn bug splatter and grime from oil and road dirt. Its high-grade, clever formula soaks deep into the muck and lets you clean fast, thoroughly and without harming the paint. It works a treat on every exterior area of the car, plus the engine bay.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective cleaning\u003c\/strong\u003e – lifts even baked-on bug remains and oil deposits with no effort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast to use\u003c\/strong\u003e – spray, let it dwell, rinse off – your car's spotless again in a couple of minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGentle on the surface\u003c\/strong\u003e – strong as it is, the cleaner stays kind to the paint and leaves no damage behind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWorks on loads of jobs\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie Insect \u0026amp; Dirt Remover\u003c\/strong\u003e isn't just for cars – it's just as good on motorbikes, motorhomes and anything else on wheels. In the warm months especially, the front of your car picks up a layer of bugs and road grime fast. With this cleaner you skip the hard scrubbing, because it cuts through the residue without touching the paint surface.\u003c\/p\u003e\n\u003ch3\u003eDead simple to use\u003c\/h3\u003e\n\u003cp\u003eUsing the \u003cstrong\u003eKoch-Chemie Insect \u0026amp; Dirt Remover\u003c\/strong\u003e couldn't be easier. You spray it on neat onto the dirty areas, let it dwell for one to three minutes, then rinse it off well. For really stubborn marks, you can help it along with a wash pad. After that, a wash with \u003cstrong\u003eNanoMagicShampoo\u003c\/strong\u003e gives you the perfect finish.\u003c\/p\u003e\n\u003ch3\u003eStrong cleaning power from an alkaline formula\u003c\/h3\u003e\n\u003cp\u003eThanks to its alkaline formula, the \u003cstrong\u003eInsect \u0026amp; Dirt Remover\u003c\/strong\u003e lifts even the toughest dirt particles. Oil and soot residue on bonnets, bumpers and windscreens is no longer a problem. Unlike weaker cleaners, this one grabs deep-seated grime too, so you don't need several passes.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"10kg","offer_id":48762428752207,"sku":"D1-KCX-77701010","price":92.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-insect-dirt-remover-idr-insekten-schmutzentferner_10kg.png?v=1714922653"},{"product_id":"koch-chemie-mehrzweckreiniger-mzr-universalreiniger","title":"Multi-Purpose Cleaner \"Mzr\" All-Purpose Cleaner","description":"\u003ch2 id=\"speakable-headline\"\u003ePull oil, nicotine and grease out of the pores with Koch-Chemie Multi-Purpose Cleaner Mzr\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Koch-Chemie Multi-Purpose Cleaner Mzr? An alkaline heavy-duty cleaner with pH 12.5 that breaks down oils, grease, nicotine, soot and grey ingrained dirt on fabric, plastics and industrial surfaces — a concentrate you dilute anywhere from 1:5 to 1:50. Keep it off soft-touch surfaces, leather and painted panels.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Mzr\u003c\/strong\u003e is an alkaline cleaner concentrate from Koch-Chemie that chemically lifts stubborn organic dirt out of pores and fibres. The pH of 12.5 in the concentrate saponifies fats and oils through alkaline hydrolysis — something pH-neutral cleaners simply can't do chemically. Dilute it 1:10 and you sit around pH 11, which is plenty for most interior surfaces in the car. Koch-Chemie has it under an official Daimler approval, which is why detail shops and workshops keep it on the shelf as a default.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-mehrzweckreiniger-mzr-universalreiniger_hero.png?v=1776196784\" alt=\"Koch-Chemie Mzr 1L bottle next to the open door of a black Mercedes-AMG GT in the warehouse bay\" width=\"900\" loading=\"lazy\"\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDilute from 1:5 to 1:50 — one concentrate for any kind of dirt.\u003c\/strong\u003e For heavy jobs like motor oil or nicotine films you work at 1:5. For everyday interior cleaning 1:20 to 1:50 is plenty. One litre of concentrate at 1:20 makes 21 litres of working solution — at €7.67 a litre that's €0.37 per litre of ready-to-use cleaner.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCuts through what pH-neutral cleaners leave behind.\u003c\/strong\u003e Nicotine, greasy fingers on headliners, ingrained grey on light fabric seats — these are the jobs where the Mzr earns its keep. The alkaline formula saponifies fatty acids and emulsifies oil residue rather than just pushing them around the surface. Where a neutral \u003ca href=\"\/products\/koch-chemie-allround-surface-cleaner-asc-allzweckreiniger\"\u003eall-purpose cleaner\u003c\/a\u003e needs two passes, the Mzr does it in one.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDaimler approval for workshop use.\u003c\/strong\u003e The official approval confirms material compatibility on Mercedes-Benz factory fabrics and plastics. Detail shops, fleet managers and independent workshops keep it as their standard interior cleaner — one concentrate for the whole fleet instead of a shelf full of specialty bottles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Never spray the Mzr neat onto a surface — pH 12.5 in the concentrate attacks soft plastics and pigments. Always dilute in the bottle first and start at 1:10. If that does the job, dial down to 1:20 next time. The most common mistake we see day-to-day: people run the dilution too strong and end up with white patches on dark plastics because the alkalinity has attacked the surface. Two passes at 1:10 give you a better, more even result than one pass at 1:5.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e1:10 on the headliner. 1:50 on the door handle.\u003c\/h3\u003e\n\u003cp\u003eKoch-Chemie Mzr works as a concentrate that you dilute fresh for every job. That sets it apart from ready-mixed \u003cstrong\u003einterior all-purpose cleaners\u003c\/strong\u003e like the \u003ca href=\"\/products\/koch-chemie-multi-interior-cleaner-innenraumreiniger-750ml\"\u003eKoch-Chemie MultiInteriorCleaner\u003c\/a\u003e, which come at a fixed strength you can't change.\u003c\/p\u003e\n\n\u003cp\u003eFor a nicotine-stained headliner or greyed fabric seats you work at 1:5 to 1:10. Spray it on evenly, let it dwell for 1–3 minutes, then work it in with a soft detailing brush in circles. The Mzr lifts the dirt chemically, the brush pulls it out of the fibres. After that you extract the dissolved soil with a clean microfibre or a wet vac. On headliners the wet vac is non-negotiable — too much standing moisture softens the textile glue and the headliner starts to sag.\u003c\/p\u003e\n\n\u003cp\u003eFor everyday interior cleaning — dash, centre console, door cards — 1:20 to 1:50 is enough. At that strength the Mzr is gentle enough for most hard plastics. The surface comes out clean and there's no greasy film left behind.\u003c\/p\u003e\n\n\u003cp\u003eRight after that you can lay down a plastic dressing — the Mzr leaves no residue that would block adhesion. That's what makes it the go-to prep step before any dressing. Still: on soft-touch steering wheels and rubberised grips even the weakest dilution is a gamble. Grab a pH-neutral cleaner for those.\u003c\/p\u003e\n\n\u003cp\u003eOutside the cabin the Mzr earns its name too: workshop floors with oil stains, grimy industrial machines, weathered motorhome trim. For outdoor use go 1:5 to 1:10 and let it dwell 3–5 minutes. Hit it with a pressure washer or a brush, then rinse off.\u003c\/p\u003e\n\n\u003cp\u003eOne detail Koch-Chemie doesn't flag on the product page: the Mzr leaves a subtle, clean scent on the surfaces it cleans. Not an artificial air freshener — just noticeably less chemical than comparable industrial cleaners. In a smoker's car it won't mask the nicotine smell, but after the clean the cabin smells neutral instead of like cleaning chemicals. Sounds like a side-effect, but in the bay it matters when you're prepping cars for resale or hand-back.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-mehrzweckreiniger-mzr-universalreiniger_anwendung.png?v=1776198150\" alt=\"Headliner cleaning with diluted Koch-Chemie Mzr from an iK Multi TR 1 spray bottle in a Mercedes-AMG GT\" width=\"900\" loading=\"lazy\"\u003e\n\n\u003ch3\u003eKoch-Chemie Mzr lifts nicotine films. Leather, it attacks.\u003c\/h3\u003e\n\u003cp\u003eOrganic dirt is the home turf of Koch-Chemie Mzr: greasy fingerprints, nicotine films, soot, ink stains and that typical grey ingrained look on light upholstery after two years of daily use. The alkaline formula handles those in one pass.\u003c\/p\u003e\n\n\u003cp\u003eThe colour shift from clean to dirty is instant on the Mzr — the microfibre after a wipe shows exactly what came out of the surface. Most dramatic on greyed light fabric seats: the first pass often pulls two shades of difference out. That's not a marketing line — it's the chemical effect of alkaline saponification breaking down the deep-set fat soiling that a neutral cleaner can't reach.\u003c\/p\u003e\n\n\u003cp\u003eKoch-Chemie positions the Mzr as an \u003cstrong\u003einterior all-purpose cleaner\u003c\/strong\u003e for cars, industry and building maintenance. The pack sizes tell you the same story: the 1-litre bottle sits next to 11 kg, 21 kg and 225 kg drums. This is a workshop cleaner that also works in the car interior. That origin is where the strength comes from — the Mzr is formulated for industrial grime, and that power follows it into the cabin.\u003c\/p\u003e\n\n\u003cp\u003eWhere the Mzr isn't the right tool: on genuine and synthetic leather with open-pore structure the alkalinity can dry out the surface and leave discolouration. Leather wants a pH-adjusted leather cleaner. On soft-touch plastics and rubberised surfaces like steering wheels or shift knobs it leaves dull patches. On painted or wrapped panels an alkaline cleaner has no business at all — even diluted 1:50, the pH still sits above 9. When you need an \u003ca href=\"\/collections\/universalreiniger\"\u003eall-purpose cleaner\u003c\/a\u003e with no risk for sensitive materials, the Koch-Chemie ASC is the safer pick — ready-mixed, pH-neutral, surface-agnostic.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-mehrzweckreiniger-mzr-universalreiniger_ergebnis.png?v=1776196797\" alt=\"Headliner before and after cleaning with Koch-Chemie Mzr – nicotine grey on the left, deep black alcantara on the right\" width=\"900\" loading=\"lazy\"\u003e\n\n\u003ch3\u003eOne drum of Koch-Chemie Mzr. 200 litres of working solution.\u003c\/h3\u003e\n\u003cp\u003eThe Koch-Chemie Mzr pays back on yield. One litre of concentrate at 1:20 dilution gives you 21 litres of ready-to-use cleaner — enough for 15–20 full interior cleans. At €7.67 a litre that works out to under €0.50 per car. If you detail regularly, grab the 11-kg drum: at €77.75 you're at €7.07 per kilo and around 200 litres of working solution at 1:20.\u003c\/p\u003e\n\n\u003cp\u003eThe Mzr is built for detailers, workshops and serious hobby detailers who want a concentrate over ready-mixed bottles. If you only clean the interior occasionally and don't want to mess with dilution, grab the MultiInteriorCleaner ready to use. If you want flexibility — stronger for a smoker's cabin, weaker for the weekly wipe-down — the Mzr is the cheaper bet.\u003c\/p\u003e\n\n\u003cp\u003eFor day-in, day-out workshop use we run a Koch-Chemie tap on the 11-kg drum: dose the concentrate into the bottle, top up with water, done. The 1-litre bottle is the one to keep for mobile work and the detailing kit. Store both frost-free between 5 and 30 °C; sealed concentrate keeps for 24 months. Use any diluted mix within four weeks.\u003c\/p\u003e\n\n\u003cp\u003eOne safety note to finish: the Mzr is classified as corrosive (H314) and carries the signal word \"Danger\". In the concentrate, always wear gloves and safety glasses. At normal working dilutions of 1:10 to 1:20 the risk drops a lot, but you still want to avoid prolonged skin contact. The safety data sheet is on the product page for download.\u003c\/p\u003e\n\n\u003cp\u003eBottom line: the Koch-Chemie Mzr isn't an everyday quick-wipe cleaner. It's a tool for jobs where you need to clean deep — smoker's cars, used-car prep, workshop floors, industrial machines. If those are your jobs and you're up for dilution and PPE, you get an \u003cstrong\u003einterior all-purpose cleaner\u003c\/strong\u003e that comes in at under €0.50 per car — hard to beat at that price.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-mehrzweckreiniger-mzr-universalreiniger_lineup.png?v=1776196804\" alt=\"Koch-Chemie Mzr 1 litre bottle and 11 kg drum on cobblestone in front of the warehouse with a Mercedes-AMG GT\" width=\"900\" loading=\"lazy\"\u003e","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":48762462536015,"sku":"D1-KCX-86001","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"2x 1000 mL","offer_id":49536037454159,"sku":"D1-KCX-86001_2","price":17.62,"currency_code":"EUR","in_stock":true},{"title":"3x 1000 mL","offer_id":49536037486927,"sku":"D1-KCX-86001_3","price":26.16,"currency_code":"EUR","in_stock":true},{"title":"11kg","offer_id":48762460307791,"sku":"D1-KCX-86011","price":79.49,"currency_code":"EUR","in_stock":true},{"title":"21kg","offer_id":49536024772943,"sku":"D1-KCX-86021","price":146.49,"currency_code":"EUR","in_stock":true},{"title":"225kg","offer_id":49536024805711,"sku":"D1-KCX-86225","price":1647.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-mehrzweckreiniger-mzr-universalreiniger.png?v=1714922290"},{"product_id":"koch-chemie-nano-crystal-polish-ncp-schaumglanzpolitur-c","title":"NanoCrystal Polish \"Ncp\" Foam Gloss Polish C","description":"\u003ch2\u003e\u003cstrong\u003eKoch-Chemie NanoCrystal Polish \"Ncp\" — Foam Gloss Polish C\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie NanoCrystal Polish \"Ncp\"\u003c\/strong\u003e is a state-of-the-art foam gloss polish built on an innovative micro-emulsion. It’s made for machine car care, and its rich foam gives you a wash result the customer can see straight away. Its high-grade, hydrophilic reactive and care components lay down a brilliant deep gloss on the paint while giving lasting protection to paint, rubber and plastic against harsh weather and grime. It also works a treat on convertible tops. Thanks to the special formula, the polish helps the wash media clean themselves and plays nicely with biological process-water treatment systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrilliant deep gloss:\u003c\/strong\u003e Leaves the paint with a lasting, intense shine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficient drying:\u003c\/strong\u003e The foam collapses on its own and preps the surface perfectly for drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-round protection:\u003c\/strong\u003e Shields paint, rubber and plastic surfaces from harmful weather and dirt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFoam gloss polish for the perfect finish\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eNanoCrystal Polish Ncp\u003c\/strong\u003e gives an outstanding wash experience thanks to its clever foam — something the customer notices right away. The special micro-emulsion spreads the product evenly and gently across the vehicle, so the paint gets the best care and protection. The hydrophilic components inside pull off deep care and a brilliant shine that really stands out.\u003c\/p\u003e\n\u003ch3\u003eA fit for all kinds of setups\u003c\/h3\u003e\n\u003cp\u003eWhether it’s \u003cstrong\u003egantry car washes\u003c\/strong\u003e or \u003cstrong\u003etunnel washes\u003c\/strong\u003e, this foam gloss polish is a versatile pick. You run it neat with a dosing pump or mixed up to 1:4. Recommended use is 10-20 ml per vehicle, so it goes a long way. On top of that, its VDA conformity (class A) means it hits the highest standards and covers plenty of uses.\u003c\/p\u003e\n\u003ch3\u003eProtection for paint, rubber and plastic\u003c\/h3\u003e\n\u003cp\u003eThe polish looks after more than just the paint — it also shields the car’s rubber and plastic parts from harsh weather like dirt, UV and moisture. It also helps the wash media clean themselves, which cuts down the upkeep over time. Best of all: the product contains no mineral oil hydrocarbons, so it’s fine for biological water treatment systems too.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"10kg","offer_id":48762472628559,"sku":"D1-KCX-241010","price":111.99,"currency_code":"EUR","in_stock":true},{"title":"21kg","offer_id":49940974305615,"sku":"D1-KCX-241021","price":205.49,"currency_code":"EUR","in_stock":true},{"title":"210kg","offer_id":49940974338383,"sku":"D1-KCX-241210","price":2190.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-nano-crystal-polish-ncp-schaumglanzpolitur-c_11kg.png?v=1714913752"},{"product_id":"koch-chemie-nano-magic-shampoo-nms-nano-shampoo","title":"NanoMagic Shampoo \"Nms\" Nano Shampoo","description":"\u003ch2\u003e\u003cstrong\u003eKoch-Chemie NanoMagic Shampoo \"Nms\" — Nano Shampoo\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie NanoMagic Shampoo\u003c\/strong\u003e, often just called \u003cstrong\u003e \"Nms\" \u003c\/strong\u003e, is a high-tech gloss shampoo with a built-in sealant made for hand washing. Thanks to its cleaning and sealing components, it leaves a long-lasting nano layer that pushes off dirt and water. That so-called lotus effect keeps the paint protected, and any polish or sealant already on the car stays put underneath. It also speeds up drying, because the water film breaks and runs straight off the second you rinse.\u003cspan\u003e\u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.koch-chemie.com\/en\/products\/nanomagic_shampoo\" rel=\"noopener\" class=\"flex h-[22px] items-center rounded-xl px-2 text-[0.5em] !font-medium uppercase bg-[#f4f4f4] !text-token-text-secondary hover:bg-token-text-primary hover:!text-token-main-surface-secondary dark:bg-token-main-surface-secondary dark:hover:bg-token-text-primary relative top-[-0.1875rem]\" target=\"_blank\"\u003e\u003cspan class=\"truncate\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss and protection in one step:\u003c\/strong\u003e cleans and seals the paint in a single wash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-lasting nano layer:\u003c\/strong\u003e builds a water- and dirt-repelling shield against the elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTops up sealants:\u003c\/strong\u003e refreshes the sealant already on the car without stripping it, so it lasts longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eHigh-gloss cleaning and sealing in one step\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe NanoMagic Shampoo \"Nms\" is made for detailers who want a proper clean and paint care at the same time. It pulls dirt off without touching the wax or sealant you laid down earlier. Instead it tops up that protective layer, so the paint shrugs off fresh grime. That pays off on cars you seal regularly, because every wash stretches the life of the sealant a bit further.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eThe lotus effect: protection and easy drying\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe standout feature here is the lotus effect. The nano layer makes water bead and roll off the paint right away, so drying after the wash is far less hassle. You get extra gloss out of it and a lot less risk of water spots — which really shows on dark paint.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSpot-on for sealed cars\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe NanoMagic Shampoo \"Nms\" is a great match for cars already sealed with Koch-Chemie 1K-Nano. It strengthens the bond of that sealant and helps it go the distance. Other sealants and waxes get topped up too thanks to the gentle clean, so the paint stays well protected.\u003cspan\u003e\u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"10kg","offer_id":48762481181007,"sku":"D1-KCX-206010","price":117.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-nano-magic-shampoo-nms-nano-shampoo_10kg.png?v=1714747055"}],"url":"https:\/\/detailing1.co\/collections\/grossgebinde.oembed?page=5","provider":"Detailing1","version":"1.0","type":"link"}