{"title":"20-Liter-Kanister","description":null,"products":[{"product_id":"koch-chemie-motorplast-mp-motorkonservierung","title":"Motorplast \"Mp\" Engine Preservation","description":"\u003ch2 id=\"speakable-headline\"\u003ePreserve the engine bay instead of just sprucing it up for a minute\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Koch-Chemie Motorplast? A water-based, silicone-free polymer preservation for engines, ancillaries, housings and rubber hoses that forms a permanently elastic protective film up to 250 °C and carries the Daimler factory approval (GOTIS P 00.16 – 02.0). Not suitable for drive belts, brake components, body paint or open intake areas.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Motorplast „Mp“\u003c\/strong\u003e is an engine preserver from Koch-Chemie that protects plastic covers, rubber hoses and ancillaries in the engine bay against corrosion, road salt and UV stress with a permanently elastic polymer film. You spray it on as a pump mist over the pre-cleaned, still-wet engine bay, where it pushes out the residual water and cross-links after 6 to 8 hours into a dirt-repellent, wafer-thin layer. Unlike classic engine-shine sprays, Motorplast skips propellants and silicone, which is what clears it for use in body shops (no painter's fisheyes) and on Mercedes-Maybach models (official factory approval).\u003c\/p\u003e\n\n\u003cp\u003eThe look stays deliberately satin-matt rather than high-gloss — the surface keeps its original character, the protection is physically there without the engine looking like it has just been oiled up. After the treatment the bay looks clean, not „greased“. That's the OEM logic behind the Daimler approval: not gloss cosmetics, but material protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-motorplast-mp-motorkonservierung_hero_v6.png?v=1777826674\" alt=\"Koch-Chemie Motorplast Mp being sprayed into the rear engine bay of a Porsche 911 992 boxer Detailing1\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDaimler factory approval instead of marketing shine.\u003c\/strong\u003e Motorplast is listed internally at Mercedes-Benz under GOTIS number P 00.16 – 02.0 and is approved up to Mercedes-Maybach. The approval checks compatibility on EPDM coolant hoses and PA, PP and ABS covers under 90–110 °C sustained load — that's why brand workshops reach for this product instead of any random engine-shine spray.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone-free and propellant-free.\u003c\/strong\u003e The water-based polymer carrier holds no volatile silicone oils (critical near paintwork — think fisheyes) and no aerosol (no butane\/propane propellants). VOC content about 3 %, labelling required under GHS07, but not flammable. That cuts the risk on jobs done right there in the shop considerably.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3 to 8 months of protection, 50–200 ml per engine bay.\u003c\/strong\u003e A 500 ml spray bottle lasts for 2 to 10 full treatments depending on engine size, which works out to 1 to 3 years of car care day-to-day. In the 5 L pro canister the price per litre drops noticeably — that version is built for detailing shops, fleet care and high-mileage households. 20 and 200 litre containers exist for industrial customers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The most common mistake with Motorplast isn't too little, it's too much. Lay down puddles instead of a fine mist and you stretch the drying time well past the usual 6 to 8 hours, the polymer cures unevenly and leaves milky edges or tacky spots. The clean routine: let the engine cool to hand-warm, pre-clean with \u003ca href=\"\/products\/koch-chemie-green-star-gs-universalreiniger\"\u003eGreen Star\u003c\/a\u003e at 1:10, rinse off with a soft water jet, mist Motorplast thinly into the still-wet bay, close the bonnet and let it sit overnight. Tap any leftover pools the next morning with a dry microfibre cloth. It's self-levelling — no working in with a pad needed.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSpray it on wet. Bonnet shut. Dry overnight.\u003c\/h3\u003e\n\n\u003cp\u003eYou spray Motorplast onto the pre-cleaned, still-wet engine bay because the residual water carries the polymers right into the tight gaps before the product itself pushes it back out. That's pro technique straight from the Daimler factory-norm test, not a marketing slogan.\u003c\/p\u003e\n\n\u003cp\u003eBefore you apply, let the engine cool down — hand-warm is ideal, boiling hot is not. On a block sitting at 130 °C oil temperature after a motorway run, the water-glycol-ether mix flashes off instantly and burns the polymers into the plastic as streaks. The officially approved heat window is 250 °C component temperature — that's for the cured film, not for the moment you apply it.\u003c\/p\u003e\n\n\u003cp\u003eFor a mid-size car, reckon on 50 to 200 ml. Work sparingly from about 20 cm away with the spray head and go systematically from back to front — valve cover, fuse box, then intake manifold, then the visible hoses and seals. You can reach awkward spots with a Cyclone or Tornador gun at 4 to 6 bar; in the home garage the supplied spray head does the job. Keep the mist away from open intake tracts and mass airflow sensors — those hot-wire sensors react badly to polymer coatings.\u003c\/p\u003e\n\n\u003cp\u003eOnce it's on, close the bonnet and let it sit 6 to 8 hours, ideally overnight. Day-one test: check the next morning whether any pools or drips are still holding. If so, tap them with a dry microfibre cloth — don't rub. The film is self-levelling and needs no mechanical spreading.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-motorplast-mp-motorkonservierung_anwendung.png?v=1777464474\" alt=\"Koch-Chemie Motorplast Mp being sprayed onto a wet engine bay Detailing1\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003ePlastic, rubber, ancillaries. Never the drive belt.\u003c\/h3\u003e\n\n\u003cp\u003eMotorplast is approved for the typical engine-bay materials: PA, PP and ABS plastic covers, EPDM rubber hoses, seals and metal ancillaries in aluminium or steel. On these substrates the permanently elastic polymer film forms, holding off dirt build-up by months and slowing road-salt corrosion.\u003c\/p\u003e\n\n\u003cp\u003eThe hard limits are friction- and safety-critical. Drive belts, V-belts and pulleys are off-limits — the polymer layer cuts the grip friction, the belt slips and worst case the alternator drops out. For the same reason, keep it off brake components, brake disc faces and the pedals. On body paint, overspray leaves streaks and is pointless there anyway — Motorplast is no paint sealant. Any mist that lands on an inner wing or bumper edge, wipe it off straight away with a damp microfibre.\u003c\/p\u003e\n\n\u003cp\u003eIf too much product did end up in the bay and milky streaks have formed, a stripping routine with an alkaline cleaner sorts it: spray \u003ca href=\"\/products\/koch-chemie-green-star-gs-universalreiniger\"\u003eGreen Star\u003c\/a\u003e on generously at 1:10, foam it up with a soft detailing brush, rinse off. The cross-linked polymers break down under the APC and the film comes off without residue. After that you can lay on a second, thinner coat of Motorplast.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-motorplast-mp-motorkonservierung_detail.png?v=1777464492\" alt=\"Koch-Chemie Motorplast Mp permanently elastic protective film on a plastic cover\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpring and autumn. Twice a year is plenty.\u003c\/h3\u003e\n\n\u003cp\u003eThe typical rhythm for Motorplast is twice a year — once in spring after the salt season and once in autumn before winter sets in. In between, dusting the plastic covers with a microfibre cloth is enough. Detailing shops slot the product into their winter-check packages, because 5 minutes of work buys 6 months of corrosion protection.\u003c\/p\u003e\n\n\u003cp\u003eThe 500 ml spray bottle is the right call for a single car or for hobbyists getting seasonal vehicles like convertibles or classics ready for spring. Per treatment 50 to 100 ml — so the bottle carries you across several seasonal cycles. For multi-car households or commercial detailers the 5 litre canister pays off: noticeably lower price per litre, just decant it into a separate \u003ca href=\"\/collections\/koch-chemie\"\u003eKoch-Chemie\u003c\/a\u003e cylinder bottle with a spray head. 20 and 200 litre containers are pure industrial variants for workshop groups and OEM supplier chains.\u003c\/p\u003e\n\n\u003cp\u003eStorage is fussier than with many other detailing products: Motorplast keeps at +5 °C to +25 °C, frost-free and out of the sun. Frost breaks down the polymer emulsion and the product won't spray cleanly afterwards. It's fine in the garage or the stockroom — just don't let it overwinter in the boot.\u003c\/p\u003e\n\n\u003cp\u003eApply Motorplast properly once — cold engine bay, wet pre-clean, thin mist, bonnet shut overnight — and you get an engine bay that looks the same after winter as it did before. That's the Detailing1 standard: not shine in the shop window, but an engine that still runs like new after three winters. For full seasonal care you pair Motorplast with \u003ca href=\"\/products\/koch-chemie-green-star-gs-universalreiniger\"\u003eGreen Star\u003c\/a\u003e as the pre-cleaner — that's the complete engine-bay workflow in under 30 minutes per car.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-motorplast-mp-motorkonservierung_lineup.png?v=1777464511\" alt=\"Koch-Chemie Motorplast Mp 500ml spray bottle and 5 litre canister Detailing1\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n","brand":"Koch-Chemie","offers":[{"title":"500ml","offer_id":48498577211727,"sku":"D1-KCX-236500","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"2x500ml","offer_id":49763373973839,"sku":"D1-KCX-236500_2","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"3x500ml","offer_id":49763374006607,"sku":"D1-KCX-236500_3","price":29.07,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":48498577277263,"sku":"D1-KCX-236005","price":65.49,"currency_code":"EUR","in_stock":true},{"title":"20 liters","offer_id":49763374039375,"sku":"D1-KCX-236020","price":244.49,"currency_code":"EUR","in_stock":true},{"title":"200 liters","offer_id":49763374072143,"sku":"D1-KCX-236200","price":2602.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-motorplast-motorkonservierung.jpg?v=1710780165"},{"product_id":"koch-chemie-wash-finish-wf-waterless-wash-detailer","title":"Wash \u0026 Finish \"Wf\" Waterless-Wash Detailer","description":"\u003ch2 data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eThe master of waterless car care is \u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKoch-Chemie's Wash \u0026amp; Finish \"Wf\" Waterless-Wash Detailer\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf you've been hunting for a fast, efficient, waterless way to clean your car, stop here. The \u003cstrong data-mce-fragment=\"1\"\u003eKoch-Chemie Wash \u0026amp; Finish Waterless-Wash Detailer\u003c\/strong\u003e is the one to grab for the exterior of lightly to moderately dirty cars. A real must-have for anyone who loves their car — it cleans, cares for and protects the paint in a single pass.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eQuick and easy to use\u003c\/strong\u003e: perfect on the go or between proper washes to give your car a glossy lift.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eGentle cleaning\u003c\/strong\u003e: clever cleaning and care components are kind to every surface they touch.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eGlossy finish\u003c\/strong\u003e: leaves a streak-free, water-repelling finish that not only shines but keeps any polish or wax you laid down underneath.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterless cleaning technology\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clever formula behind the \u003cstrong data-mce-fragment=\"1\"\u003eKoch-Chemie Wash \u0026amp; Finish Waterless-Wash Detailer\u003c\/strong\u003e lets you clean properly without a drop of water. That saves a valuable resource, and it's a lifesaver where water's restricted or when you just want a quick freshen-up between washes.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCare and protection in one step\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOn top of the clean, it lays down deep care and long-lasting protection on paint, glass, plastic trim and wheels. Watch your car come up fresh after every pass.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEasy enough for anyone\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsing the \u003cstrong data-mce-fragment=\"1\"\u003eKoch-Chemie Wash \u0026amp; Finish Waterless-Wash Detailer\u003c\/strong\u003e couldn't be simpler: mist it on, lift the dirt with a microfibre cloth, then buff it off with a second one. For really grubby spots, just go over them again.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"1000ml","offer_id":48484626923855,"sku":"D1-KCX-317001","price":12.99,"currency_code":"EUR","in_stock":true},{"title":"2x 1000 mL","offer_id":49725372399951,"sku":"D1-KCX-317001_2","price":25.46,"currency_code":"EUR","in_stock":true},{"title":"3x 1000 mL","offer_id":49725372432719,"sku":"D1-KCX-317001_3","price":37.8,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48484626956623,"sku":"D1-KCX-317010","price":94.99,"currency_code":"EUR","in_stock":true},{"title":"20 liters","offer_id":49603212345679,"sku":"D1-KCX-317020","price":169.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-wash-finish-quick-detailer.jpg?v=1710628390"},{"product_id":"koch-chemie-glass-cleaner-gc-glasreiniger","title":"Glass Cleaner \"Gc\" Glass Cleaner","description":"\u003ch2 id=\"speakable-headline\"\u003eCleaning car glass streak-free, inside and out\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Glass Cleaner \"Gc\"? A ready-to-use, alcohol-free car glass cleaner that pulls oil, grease, bug splatter and nicotine film off the glass streak-free, inside and out and on tinted windows too. Not meant as washer fluid for your reservoir and not as an anti-fog coating.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Glass Cleaner \"Gc\"\u003c\/strong\u003e is a ready-to-use glass cleaner from Koch-Chemie for car windows and every smooth surface, and it works without alcohol and without ammonia. If you want a \u003cstrong\u003ecar glass cleaner\u003c\/strong\u003e, you really want one thing: no streaks. That is exactly what the gloss-and-glide additive is for. It cuts the friction of the microfibre on the glass, so the cloth glides instead of dragging, and the fine streaks you get on the dry wipe just don't show up.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStreak-free thanks to the glide additive.\u003c\/strong\u003e The additive lowers how much the cloth grips, so the dry wipe leaves no micro-streaks. Day-to-day, 1 spray per half of the window is plenty. One verified customer told us she gets \"streak-free car windows\" and \"doesn't need much of the stuff\".\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0 percent alcohol, 0 percent ammonia, safe on tinted glass.\u003c\/strong\u003e Because the formula skips alcohol and ammonia, it won't attack tint film or coated displays. So you use 1 bottle for both sides, inside on the tinted side window and outside on the windscreen.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReady to use, no mixing.\u003c\/strong\u003e The 1-litre spray head is good to go straight away, no diluting, no measuring. For heavy users, detailers and fleets the same cleaner comes in 10, 20 and 200-litre containers, which drops the price per litre noticeably.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-glass-cleaner-gc-glasreiniger_hero.png?v=1780006588\" alt=\"Koch-Chemie Glass Cleaner Gc glass cleaner 1 litre in front of a dark sports car\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eMore than 5 verified customer reviews on Trusted Shops confirm the streak-free result in daily use.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Streaks almost never come from the cleaner, they come from technique. We often get messages like \"the glass cleaner leaves streaks\". Usually the wiping happened on a warm pane in the sun, where the film flashes off before the cloth lifts it. Work on a cold pane in the shade and go by the two-cloth rule: lift the dirt with 1 damp cloth, then buff dry in straight passes with a dry glass cloth. More product doesn't clean better, it tends to leave edges.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSpray it on neat, pull it off streak-free with two cloths\u003c\/h3\u003e\n\u003cp\u003eYou spray the Glass Cleaner \"Gc\" on neat from 20 to 30 cm onto the cold, shaded pane and pull it off with a dry microfibre glass cloth in straight passes. That way no film of water is left standing to flash off.\u003c\/p\u003e\n\u003cp\u003eOutside, the cleaner lifts bug splatter, pollen and the greasy road film. With a baked-on bug front, let the cleaner soak for about 30 seconds and only then pull it off, rather than scrubbing harder. That goes easy on the glass and on the wiper blades.\u003c\/p\u003e\n\u003cp\u003eInside, it's about the greasy film off-gassing from the dash and about nicotine. If you want to \u003cem\u003eclean your car windows from the inside\u003c\/em\u003e, spray sparingly onto the cloth rather than straight onto the glass, so no mist drifts onto a display or a vent. With a \u003ca href=\"\/products\/the-rag-company-diamond-280-gsm-mikrofaser-glastuch\"\u003emicrofibre glass cloth\u003c\/a\u003e especially, the cloth quality decides whether the loosened dirt gets picked up or just smeared around.\u003c\/p\u003e\n\u003cp\u003eThe second, bone-dry pass over the finished pane lifts the last haze out. That's exactly the step most people skip, and that's exactly where you get the streaks you spot later in backlight. A good glide additive makes the difference here between any old cleaner and a real car glass cleaner.\u003c\/p\u003e\n\u003cp\u003eWhy the cold pane? The additive only works its glide as long as the film is liquid. On hot glass the water flashes off too fast, the cleaner grabs and the cloth just pushes the dirt around. In the shade or early in the morning you've got that window of time. Wash new microfibre cloths once without softener before they ever touch glass too, otherwise they carry sizing onto it that pulls streaks all by itself.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-glass-cleaner-gc-glasreiniger_anwendung.png?v=1780006597\" alt=\"Koch-Chemie Glass Cleaner Gc being sprayed on a car window and pulled off with a microfibre cloth\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat the Gc is built for and what it isn't\u003c\/h3\u003e\n\u003cp\u003eThe Gc cleans glass, it doesn't seal it and it doesn't belong in the washer reservoir. As a pure spray-and-wipe cleaner it replaces neither the antifreeze washer fluid in the reservoir nor a hydrophobic glass sealant for the beading effect.\u003c\/p\u003e\n\u003cp\u003eWith heavily baked-on residue, 1 pass isn't always enough. One verified customer puts it well: with stubborn dirt you need 2 to 3 passes rather than scrubbing under pressure. A short soak and another pull is gentler and quicker in the end, because you avoid scratches you'd have to polish out later.\u003c\/p\u003e\n\u003cp\u003eAnti-fog protection is something the Gc deliberately leaves out. It gets you clean, clear glass, but against fogging from the inside only an anti-fog treatment helps for the long run. Clean glass does fog up far more evenly though, and so far less of a bother than a greasy film.\u003c\/p\u003e\n\u003cp\u003eBeyond the car the Gc cleans mirrors, interior and exterior, motorcycle visors, instrument glass and smooth surfaces around the house like tiles or stainless steel. The only place to be careful is on matte anti-glare nav and instrument displays: there you always spray onto the cloth and work with little pressure, so the coating doesn't suffer. On clear glass and glossy plastic headlights it works with no restrictions.\u003c\/p\u003e\n\u003cp\u003eIn a smoker's car a tacky nicotine film settles on the inside glass, scattering the light and making everything look yellowed. Here you work in 2 layers: lift and roughly take it off first, then buff dry with a fresh cloth. After that first thorough clean a normal pass later is enough to keep the view clear.\u003c\/p\u003e\n\u003cp\u003eIf you want to work ready-to-use and stay film- and tint-safe, the Gc is the right call. If instead you want an economical concentrate to dilute yourself with a Daimler factory approval, the \u003ca href=\"\/products\/koch-chemie-glas-star-gla-glasreiniger-konzentrat\"\u003eglass cleaner concentrate\u003c\/a\u003e is the fitting alternative.\u003c\/p\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDecision\u003c\/th\u003e\n\u003cth\u003eGlass Cleaner \"Gc\"\u003c\/th\u003e\n\u003cth\u003eGlas Star \"Gla\"\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eForm\u003c\/td\u003e\n\u003ctd\u003eready to use, spray and wipe\u003c\/td\u003e\n\u003ctd\u003econcentrate, dilute yourself\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003ealcohol-free, ammonia-free\u003c\/td\u003e\n\u003ctd\u003ealcohol-based\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStrength\u003c\/td\u003e\n\u003ctd\u003efilm- and tint-safe, ready straight away\u003c\/td\u003e\n\u003ctd\u003eDaimler factory approval, very economical\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWho for\u003c\/td\u003e\n\u003ctd\u003eclear view with no mixing\u003c\/td\u003e\n\u003ctd\u003eheavy users who want to drop the price per litre\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-glass-cleaner-gc-glasreiniger_ergebnis.png?v=1780006606\" alt=\"Streak-free car window with a clear reflection after cleaning with Koch-Chemie Glass Cleaner Gc\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFor a clear view day-to-day, from commuter to fleet\u003c\/h3\u003e\n\u003cp\u003eA good car glass cleaner has to work inside and out, and that's exactly what makes the Gc the everyday cleaner for anyone who wants clear glass fast with no mixing. The commuter grabs the 1-litre bottle, the detailer the 10 or 20-litre container.\u003c\/p\u003e\n\u003cp\u003eGlass cleaners are in highest demand in spring: pollen and bug season drives demand about 40 percent over the quiet winter level. If you've got a bottle in the boot now, you clean the windscreen on the road instead of driving into the low sun with a pollen film and streaks.\u003c\/p\u003e\n\u003cp\u003eDay-to-day the difference shows in the details: no streaks in backlight, no haze on the inside glass that turns oncoming headlights into stars at night. If you drive a lot with the sun low or in the dark, you notice a streak-free pane straight away.\u003c\/p\u003e\n\u003cp\u003eThe Gc is fuss-free on cost: 1 litre ready-to-use lasts many weeks of commuter life depending on how much you spray, and decanting the 10-litre container into a spray bottle costs you far less per litre. Store the cleaner frost-free and the spray function stays reliable across the whole shelf life. An opened bottle in the car survives the summer heat better if it isn't left baking in full sun all the time.\u003c\/p\u003e\n\u003cp\u003eHow often you clean depends on your driving: if you commute daily, keep the windscreen clear inside about every 2 weeks and outside as needed with pollen or bugs. High-mileage drivers and detailers with several cars a day get the most out of the big container and a spray bottle fixed to the trolley. That turns reaching for the car glass cleaner into routine rather than the exception.\u003c\/p\u003e\n\u003cp\u003eThe one trick hardly anyone does and that stops most streaks: clean the inside first, then the outside, and pull horizontally inside, vertically outside. If a streak is left after cleaning, the direction tells you straight away whether it's on the inside or the outside, and you only fix it there. That saves you the third pass and the guessing. You'll find the matching workflow and more products in the \u003ca href=\"\/collections\/glasreiniger\"\u003eglass cleaner\u003c\/a\u003e category.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-glass-cleaner-gc-glasreiniger_lineup.png?v=1780006614\" alt=\"Koch-Chemie Glass Cleaner Gc 1 litre and 10 litre containers side by side\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":48762336215375,"sku":"D1-KCX-302001","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48762336248143,"sku":"D1-KCX-302010","price":46.99,"currency_code":"EUR","in_stock":true},{"title":"20 liters","offer_id":49603176825167,"sku":"D1-KCX-302020","price":84.49,"currency_code":"EUR","in_stock":true},{"title":"200 liters","offer_id":49603176857935,"sku":"D1-KCX-302200","price":886.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-glass-cleaner-gc-glasreiniger.png?v=1714748313"},{"product_id":"koch-chemie-super-foam-fruit-bowl-sff-reinigungsschaum","title":"Super Foam Fruit Bowl \"Sff\" cleaning foam","description":"\u003ch2\u003e\n\u003cstrong\u003eCleaning foam: a must for the perfect car wash, \u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003cstrong\u003eKoch-Chemie Super Foam Fruit Bowl \"Sff\" \u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eGive your car care a shake-up with the \u003cstrong\u003eKoch-Chemie Super Foam Fruit Bowl \"Sff\"\u003c\/strong\u003e — a cleaning foam that does things differently. This heavy-foaming alkaline active foam doesn't just give you a proper deep clean, it leaves your wash bay smelling fruity-fresh. Made for self-service bays and foam cannons, it wraps around the dirt, holds on, and rinses straight off without touching your paint.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-foaming formula\u003c\/strong\u003e: lays down a thick, long-lasting blanket of foam for a proper clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFruity-fresh scent\u003c\/strong\u003e: turns the wash bay into a genuinely nice place to work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint-safe cleaning\u003c\/strong\u003e: locks the dirt in and rinses off without a fight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eA proper clean with serious foam\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSuper Foam Fruit Bowl \"Sff\"\u003c\/strong\u003e from Koch-Chemie is built around a heavy-foaming formula that lays down a thick, long-lasting blanket of foam. That deep foam is what lets you pull even stubborn grime off the panel and rinse it away safely. Made for self-service bays and foam cannons, it gives you a foam experience that any car-care nut will appreciate.\u003c\/p\u003e\n\u003ch3\u003eA fresh scent for a nicer wash bay\u003c\/h3\u003e\n\u003cp\u003eOn top of the cleaning power, the \u003cstrong\u003eSuper Foam Fruit Bowl \"Sff\"\u003c\/strong\u003e brings a fruity-fresh aroma that hangs around the bay long after you're done. That smell turns the job into something you actually enjoy — every wash becomes a treat for the senses, not just a chore.\u003c\/p\u003e\n\u003ch3\u003eAlkaline active foam that's gentle on the dirt-pull\u003c\/h3\u003e\n\u003cp\u003eWith an alkaline pH and seriously effective actives, the \u003cstrong\u003eSuper Foam Fruit Bowl \"Sff\"\u003c\/strong\u003e gives you a thorough clean that still goes easy on the paint. The foam encapsulates the dirt and rinses off effortlessly under a pressure washer, so your car's clear coat stays protected. VDA Class A compliance means you get safe use with maximum efficiency on top.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"5 liters","offer_id":48762920108367,"sku":"D1-KCX-253005","price":39.99,"currency_code":"EUR","in_stock":true},{"title":"20 liters","offer_id":49603294265679,"sku":"D1-KCX-253020","price":135.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-super-foam-fruit-bowl-sff-reinigungsschaum_5L.png?v=1714746344"},{"product_id":"koch-chemie-teerwaesche-a-tea-bitumen-teerentferner","title":"Teerwäsche A \"Tea\" Bitumen \u0026 Tar Remover","description":"\u003ch2 id=\"speakable-headline\"\u003eBreak down tar and bitumen with Koch-Chemie Teerwäsche A — no scrubbing\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-definition\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Koch-Chemie Teerwäsche A? A solvent-based specialist cleaner built on C10–C13 hydrocarbons that chemically breaks down tar, bitumen, oil and grease residue — neat on a dry surface, 30 seconds to 3 minutes dwell time, then rinse off with a pressure washer. Carries Daimler approval and is free of halogenated hydrocarbons. Not suitable for rubber, EPDM seals, soft plastic trim or freshly sealed paint.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-summary\"\u003eThe \u003cstrong\u003eKoch-Chemie Teerwäsche A\u003c\/strong\u003e is a solvent-based tar and bitumen remover with Daimler approval that lifts stubborn road residue off solvent-resistant surfaces without ever touching the paint mechanically. The active blend — C10–C13 n-alkanes, isoalkanes and cycloalkanes with under 2 percent aromatics — chemically breaks apart the molecule chains in bitumen and tar. The residue runs off in streaks and you either steam it away with the pressure washer or wipe it off with a microfibre cloth.\u003c\/p\u003e\n\n\u003cp\u003eFree of halogenated hydrocarbons, so it's a lot kinder to materials than the old-school tar removers people kept in jerry cans back in the 90s. Available in 1 litre, 10 litre and 20 litre — plus a 2-pack and 3-pack when you need more. Alongside the alkane blend the formula carries a share of 2-butoxyethanol as a coupling agent, which improves how it wets a glass-smooth panel and keeps it working even at cooler ambient temperatures. For indoor use, run ventilation above three air changes an hour, and eye protection is a must for any overhead work.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChemical, not mechanical.\u003c\/strong\u003e You can't polish tar out — scrubbing drags the particles across the paint and leaves swirls behind. Teerwäsche A softens the bituminous residue within 30 to 180 seconds until it flows away or lifts off the cloth in one pass. The brush stays in the drawer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDaimler approval as a green light for pro use.\u003c\/strong\u003e Koch-Chemie works hand in hand with the car industry. The Daimler approval isn't a marketing sticker — it means the product is officially cleared for use on Daimler paints and underbody materials. For shops tied to a manufacturer, that's a practical argument.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFree of halogenated hydrocarbons.\u003c\/strong\u003e Older tar removers often lean on trichloroethylene or perchloroethylene — both heavy on odour, a health concern, and barely approvable for pro use any more. Teerwäsche A works with a modern hydrocarbon blend that's workable in well-ventilated spaces from about 15 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Teerwäsche A doesn't just break down tar — it strips the wax or sealant underneath along with it. That's the bit manufacturers and rivals rarely mention. If you do nothing after the tar comes off, you're left with unprotected paint that takes on fallout and water spots with no barrier. So always plan it in as the first step of a combo job: tar wash → normal wash with a pH-neutral shampoo → reseal with a \u003ca href=\"\/products\/sonax-profiline-speedprotect-spruhversiegelung\"\u003espray sealant\u003c\/a\u003e or wax. For a spot job (the odd tar fleck on the sill) a quick detailer is enough as local protection. For a full exterior job including resealing, set aside about 45 minutes for a mid-size car.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSpray it on neat. Short dwell. Steam it off.\u003c\/h3\u003e\n\n\u003cp\u003eThe application is kept deliberately simple. Lay Teerwäsche A on the dry, cold surface undiluted — either straight from the 1-litre bottle with the \u003ca href=\"\/products\/koch-chemie-teerwaesche-a-tea-bitumen-teerentferner?variant=54013040492879\"\u003eCanyon spray head CHS-3AN\u003c\/a\u003e or from a sturdy solvent-safe spray bottle. A wet surface dilutes the solvent and cuts the cleaning power right down — when washing, tar wash first, then shampoo.\u003c\/p\u003e\n\n\u003cp\u003eDwell time runs from 30 seconds to 3 minutes — depending on how thick the tar layer is. You can see when it's working: the tar dissolves into brownish-black streaks and runs down vertical surfaces. As soon as that happens, rinse straight off with a strong jet of water or wipe it away with a clean microfibre cloth. A 1000 ml bottle covers roughly 4 to 6 full vehicle sides with moderate tar.\u003c\/p\u003e\n\n\u003cp\u003eOn bigger areas, don't let it dry — in direct sun or on hot paint above 25 °C the solvent flashes off too fast and leaves an oily film that only comes off at the next wash. For underbody or wheel-arch work on commercial vehicles, the 10 or 20 litre version is the right call.\u003c\/p\u003e\n\n\u003cp\u003eThere you apply it over a wide area with a pump sprayer and then steam it off with the pressure washer at around 120 bar. On stubborn, dried-on bitumen spots after a drive through roadworks, a second application does more than a longer dwell on the first pass — the solvent is saturated after about 3 minutes and stops working.\u003c\/p\u003e\n\n\u003ch3\u003eIt breaks down tar. And wax too.\u003c\/h3\u003e\n\n\u003cp\u003eTeerwäsche A attacks any organic coating sitting on the paint. That's how it works — and at the same time it's the one catch for anyone who reaches for it without a plan. Carnauba waxes, synthetic polymer-based sealants and most quick detailers dissolve away on contact with the hydrocarbon blend. That's no fault in the product either, it's chemistry: what breaks down bitumen breaks down wax too, because both are built on similar organic molecule structures.\u003c\/p\u003e\n\n\u003cp\u003eFor the real world that means two things. First: every tar wash is followed by a full paint wash with a pH-neutral shampoo to neutralise the solvent residue. Second: the treated spot needs a fresh layer of protection.\u003c\/p\u003e\n\n\u003cp\u003eIf you're only dealing with small flecks on the side sill, you can follow up with a spot wax or detailer. If you're cleaning whole panels or the underbody, build the reseal into the workflow as a fixed step. SiO₂-based ceramic coatings usually aren't fully wrecked after a tar-wash treatment, but they lose noticeable hydrophobicity — a topper or detailer brings them back up to level.\u003c\/p\u003e\n\n\u003cp\u003eWhat Teerwäsche A isn't suited to: unpainted soft plastics, rubber seals and EPDM profiles. The solvent swells rubber over longer contact and can dull plastics. It mainly hits window seals, door rubbers and black plastic trim on older vehicles.\u003c\/p\u003e\n\n\u003cp\u003eDon't spray it over those surfaces broadly — if overspray happens, rinse it off with water within 60 seconds. On fresh wraps and PPF (paint protection film), test first on a hidden spot. Plenty of PPF coatings handle short contact times under 30 seconds but react sensitively to longer exposure.\u003c\/p\u003e\n\n\u003ch3\u003eWhen Teerwäsche A fits — and when it doesn't\u003c\/h3\u003e\n\n\u003cp\u003eTeerwäsche A is the right call when you're removing genuine road tar, bitumen spray after driving through roadworks, asphalt residue on wheel arches or dried-on oil films in the underbody area. It's also built for the regular cleaning of car-wash brushes and shop floors — wherever it's not paint cosmetics that's needed but real chemical solving power. In the spring season after winter it's standard for underbody prep, once tar-salt mixes have piled up over months.\u003c\/p\u003e\n\n\u003cp\u003eFor insect residue, though, it's not the first choice. Insect proteins are organic but structured differently — enzymatic cleaners like the \u003ca href=\"\/collections\/insektenentferner\"\u003einsect remover\u003c\/a\u003e work more precisely and more gently on paint there. If you've got both at once — tar on the sill, bugs on the front end — treat both areas separately with the product that fits each. Trying to solve everything with one all-rounder usually ends in more rework. Same goes for tree sap and adhesive residue: both dissolve with the tar wash, but a dedicated tree-sap remover works cleaner.\u003c\/p\u003e\n\n\u003cp\u003eAs for pack size, the 1-litre bottle suits the private user and the occasional detailer planning one go per vehicle. The 2-pack and 3-pack bring the price per litre down by roughly 5 to 15 percent — worth it if there are several vehicles in the household or you want the season's supply locked in.\u003c\/p\u003e\n\n\u003cp\u003eThe 10 and 20 litre drums are trade sizes for reconditioning, underbody cleaning or fleet work — here the outlay only pays off from regular weekly use. For precise single-spot application the 1-litre bottle with the Canyon spray head stays the most ergonomic solution. The spray head delivers a precise cone rather than a mist and doses right onto the problem spot without wetting more area than needed.\u003c\/p\u003e\n\n\u003cp\u003eStore Teerwäsche A frost-free at room temperature. Once opened, the bottle stays stable for about 24 months as long as the cap is closed tight after use — hydrocarbon solvents evaporate slowly otherwise and the concentration drops.\u003c\/p\u003e\n\n\n\u003chr\u003e\n\n\u003cdiv class=\"care-guide\"\u003e\n  \u003ch3\u003eHow to use Koch-Chemie Teerwäsche A\u003c\/h3\u003e\n\n  \u003col\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrep.\u003c\/strong\u003e Move the vehicle into the shade, paint temperature under 25 °C. Never use Teerwäsche A on heated surfaces or in direct sun — the solvent then flashes off too fast and leaves an oily film. Have gloves (nitrile-resistant) and safety glasses ready. Pick a well-ventilated area; for pro use, make sure of at least three air changes an hour.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eIdentify the area.\u003c\/strong\u003e Tar and bitumen spots are typically found on the lower vehicle sections: side sills, wheel arches, bumpers, lower door edges. The affected area has to be dry — a wet surface dilutes the solvent and cuts the effect. If the vehicle was just washed, let it dry first.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eSpray on.\u003c\/strong\u003e Apply Teerwäsche A undiluted with the Canyon spray head CHS-3AN or a solvent-resistant trade spray bottle onto the affected spot. Spray from about 15 to 20 cm in an even film, without flooding the surface. Work vertically: bottom to top, so the product runs down and wets the whole area.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eLet it dwell.\u003c\/strong\u003e Leave it 30 seconds to 3 minutes. You'll see when it's working: tar dissolves into brownish-black streaks running down the surface. Don't let it dry — in warmer conditions above 20 °C go for shorter dwell times and a second application. Beyond 3 minutes, longer dwell brings no extra cleaning power.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eRinse or wipe off.\u003c\/strong\u003e Steam the dissolved residue away with the pressure washer at around 120 bar from 30 cm. Or wipe it off with a clean microfibre cloth — after use, bin the cloth or wash it separately, it's saturated with solvent and tar. Don't put it back into the regular wash.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eRinse with shampoo.\u003c\/strong\u003e After tar removal, wash the treated area down thoroughly with a pH-neutral car shampoo to neutralise solvent residue. This isn't optional — leftover hydrocarbon traces cloud the gloss later and can smear at the next polish.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDry and reseal.\u003c\/strong\u003e Dry the vehicle or area. Teerwäsche A has stripped the wax or sealant protection in the treated area along with the tar. Spot job: follow up with a quick detailer or spot wax. Whole panels: reprotect with a spray sealant or a liquid wax. Ceramic coatings usually stay intact but need an SiO₂ topper to refresh the hydrophobicity.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003cdiv class=\"hinweise\"\u003e\n    \u003ch4\u003eSafety notes\u003c\/h4\u003e\n    \u003cul\u003e\n      \u003cli\u003eSignal word: \u003cstrong\u003eDanger\u003c\/strong\u003e\n\u003c\/li\u003e\n      \u003cli\u003eH319 — Causes serious eye irritation\u003c\/li\u003e\n      \u003cli\u003eH304 — May be fatal if swallowed and enters the airways\u003c\/li\u003e\n      \u003cli\u003eEUH066 — Repeated exposure may cause skin dryness or cracking\u003c\/li\u003e\n      \u003cli\u003eP280 — Wear eye protection\u003c\/li\u003e\n      \u003cli\u003eP301+P310 — IF SWALLOWED: immediately call a poison centre\/doctor\u003c\/li\u003e\n      \u003cli\u003eP331 — Do NOT induce vomiting\u003c\/li\u003e\n      \u003cli\u003eDo not discharge into drains, surface water or groundwater\u003c\/li\u003e\n      \u003cli\u003eUsing it together with emulsifying cleaners disrupts the separation behaviour in the oil separator\u003c\/li\u003e\n      \u003cli\u003eBefore first use, test for suitability and compatibility on a hidden spot\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"anwendungsbereiche\"\u003e\n    \u003ch4\u003eSuitable surfaces\u003c\/h4\u003e\n    \u003cul\u003e\n      \u003cli\u003eIntact, cured clear coat (cars, commercial vehicles)\u003c\/li\u003e\n      \u003cli\u003ePainted wheels and chrome surfaces\u003c\/li\u003e\n      \u003cli\u003eGlass surfaces (windows, headlight lenses)\u003c\/li\u003e\n      \u003cli\u003eUnpainted metal bodywork parts\u003c\/li\u003e\n      \u003cli\u003eCar-wash brushes\u003c\/li\u003e\n      \u003cli\u003eShop floors (concrete, sealed screed)\u003c\/li\u003e\n      \u003cli\u003eMachinery and conveyor components\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003ch4\u003eNot suitable\u003c\/h4\u003e\n    \u003cul\u003e\n      \u003cli\u003eRubber seals, EPDM profiles, door rubbers\u003c\/li\u003e\n      \u003cli\u003eSoft unpainted plastics (ABS, exterior PP)\u003c\/li\u003e\n      \u003cli\u003eFreshly painted surfaces under 4 weeks\u003c\/li\u003e\n      \u003cli\u003ePPF\/paint protection films without a prior test\u003c\/li\u003e\n      \u003cli\u003ePolycarbonate headlights without a protective coating\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\n\u003chr\u003e\n\n\u003cdiv class=\"faq\"\u003e\n  \u003ch3\u003eCommon questions about Koch-Chemie Teerwäsche A\u003c\/h3\u003e\n\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I use Teerwäsche A on painted surfaces?\u003c\/summary\u003e\n    \u003cp\u003eYes, on intact, cured clear coat it's no problem. The blend of C10–C13 hydrocarbons with under 2 percent aromatics doesn't attack the paint itself, but it does strip the wax or sealant layer sitting on top along with it. Count on a necessary reseal or wax application after every tar wash. On fresh paintwork under 4 weeks old, test first on a hidden spot.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long does Teerwäsche A need to dwell?\u003c\/summary\u003e\n    \u003cp\u003eBetween 30 seconds and 3 minutes, depending on how thick the tar layer is. A fresh bitumen fleck dissolves in under a minute, dried-on road tar after a drive through roadworks takes up to 3 minutes. After 3 minutes the active is saturated — longer dwell brings no extra cleaning power. On stubborn residue, better to apply a second time.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes Teerwäsche A also remove insect residue?\u003c\/summary\u003e\n    \u003cp\u003ePartly. Insect proteins only partly dissolve in hydrocarbon solvents. For insect residue, an enzymatic insect remover like the Meguiar's Bug Remover or CarPro Bug-Out is a lot more effective and gentler on paint. Teerwäsche A is the go-to for bituminous soiling, oil and grease film and adhesive residue — on protein soiling it won't get you into the top league.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails\u003e\n    \u003csummary\u003eIs Teerwäsche A suitable for rubber and plastic?\u003c\/summary\u003e\n    \u003cp\u003eNo. Hydrocarbon-based solvents swell rubber seals and can dull soft plastics like ABS or PP. This hits window seals, door rubbers, EPDM profiles and black plastic trim on older vehicles. If overspray happens, rinse off with clean water within 60 seconds. On paint protection films (PPF) and fresh wraps, test first on a hidden spot.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I have to reseal after the tar wash?\u003c\/summary\u003e\n    \u003cp\u003eIf you're treating more than the odd fleck: yes. Teerwäsche A strips waxes and sealants on the treated area along with the tar. For single spots a quick detailer or spot wax is enough. On whole panels or underbody cleaning, a spray sealant or a wax belongs firmly in the workflow. Ceramic coatings usually survive the job but lose hydrophobicity — an SiO₂ topper brings them back up to level.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich pack size is right for me?\u003c\/summary\u003e\n    \u003cp\u003eFor private users with one vehicle, the 1-litre bottle is enough — it covers roughly 4 to 6 full vehicle sides. If you look after several cars or stock up for the season, go for the 2-pack or 3-pack with 5 to 15 percent off per litre. The 10 and 20 litre drums are trade sizes for vehicle reconditioning, underbody cleaning and fleet work. The Canyon spray head CHS-3AN is also worth adding for precise spot application.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the Daimler approval actually mean?\u003c\/summary\u003e\n    \u003cp\u003eThe Daimler approval means the product has passed the material-compatibility test of the Mercedes-Benz production clearance. It's been tested on genuine Daimler paints, plastics and metal surfaces and cleared for use in contracted shops. For shops tied to a manufacturer that's solid reassurance, for private users an extra quality signal.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use Teerwäsche A on painted surfaces?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, on intact, cured clear coat it's no problem. The blend of C10–C13 hydrocarbons with under 2 percent aromatics doesn't attack the paint itself, but it does strip the wax or sealant layer sitting on top along with it.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How long does Teerwäsche A need to dwell?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Between 30 seconds and 3 minutes, depending on how thick the tar layer is. After 3 minutes the active is saturated — longer dwell brings no extra cleaning power.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does Teerwäsche A also remove insect residue?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Partly. For insect residue, an enzymatic insect remover is a lot more effective and gentler on paint. Teerwäsche A is the go-to for bituminous soiling, oil and grease film and adhesive residue.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is Teerwäsche A suitable for rubber and plastic?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. Hydrocarbon-based solvents swell rubber seals and can dull soft plastics. If overspray happens, rinse off with clean water within 60 seconds.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do I have to reseal after the tar wash?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, if you're treating more than the odd fleck. Teerwäsche A strips waxes and sealants on the treated area along with the tar. On whole panels or underbody cleaning, a spray sealant or a wax belongs firmly in the workflow.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Which pack size is right for me?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"For private users with one vehicle, the 1-litre bottle is enough — it covers roughly 4 to 6 full vehicle sides. The 10 and 20 litre drums are trade sizes for vehicle reconditioning, underbody cleaning and fleet work.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does the Daimler approval actually mean?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Daimler approval means the product has passed the material-compatibility test of the Mercedes-Benz production clearance and is cleared for use in contracted shops.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":48762927546703,"sku":"D1-KCX-391001","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"1000 ml + Canyon spray head CHS-3AN","offer_id":54013040492879,"sku":"D1-KCX-391001+CHS-3AN","price":13.98,"currency_code":"EUR","in_stock":true},{"title":"2x 1000 mL","offer_id":49764087038287,"sku":"D1-KCX-391001_2","price":17.62,"currency_code":"EUR","in_stock":true},{"title":"3x 1000 mL","offer_id":49764087071055,"sku":"D1-KCX-391001_3","price":26.16,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":48762927579471,"sku":"D1-KCX-391010","price":72.99,"currency_code":"EUR","in_stock":true},{"title":"20 liters","offer_id":49383895957839,"sku":"D1-KCX-391020","price":131.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-teerwasche-a-tea-bitumen-teerentferner.png?v=1714920838"},{"product_id":"koch-chemie-ceramic-effect-polish-cep-schaumpolitur","title":"Ceramic Effect Polish \"Cep\" Foam Polish","description":"\u003ch2 id=\"speakable-headline\"\u003eFoam polish Cep for hydrophobic gloss straight out of the car wash\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eThe \u003cstrong\u003efoam polish\u003c\/strong\u003e Ceramic Effect Polish \"Cep\" is a brush-activated premium concentrate for automatic car washes and gantry systems. Just 5 to 10 millilitres per car lay down a protective film that breaks the water apart and sheets it straight off. Not for hand or touchless washing, not for interior materials like leather or upholstery.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Ceramic Effect Polish \"Cep\"\u003c\/strong\u003e is a brush-activated foam polish from the professional machine-line range, made for the final stage of a car wash. The active ingredient is an amino-functional siloxane polymer — in plain terms, a flexible silicone with grabbing nitrogen anchors that lock onto the clear coat the moment brushes or Swingtex strips work it into the paint. What that means for you: the car leaves the line with real beading that holds until the next wash.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-ceramic-effect-polish-cep-schaumpolitur_hero.jpg?v=1780347787\" alt=\"Koch-Chemie Ceramic Effect Polish Cep 20-litre canister in front of a dark sports car beading in the workshop\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro-dosing, 5 to 10 ml per car.\u003c\/strong\u003e One 20-litre canister covers up to 4,000 washes. Standard machine polishes need 10 to 70 ml or grams per car — Cep uses 2 to 10 times less product and frees up space in the chemical store.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePaint, glass and the machine are protected at once.\u003c\/strong\u003e The siloxane layer doesn't just seal clear coat, glass and plastic trim — it also impregnates the brushes and Swingtex strips of the machine itself. What we see day-to-day: roughly 20 percent longer service life on the wash materials.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFive minutes dwell time max, paint surface up to 30 °C.\u003c\/strong\u003e Inside that window Cep won't attack paint, chrome or plastic. In day-to-day running that means: if the conveyor stops for more than three minutes, hit the cars with the pressure washer, or you get polymer spots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e What we see on every other site that switches to Cep is the same picture: the old diaphragm dosing pump is still set to 30 to 50 ml per wash, because that is what the previous polish needed. The result: smeary streaks on the windscreen, juddering wipers, the hydrophobic effect gone. The pro rule: before the first Cep run, recalibrate the pump to 5 to 10 ml, no exceptions, and check the dosing valve after 200 washes. If the conveyor stops for more than three minutes, hit the cars with the pressure washer too — polymer burn-in above 30 °C paint temperature is the most expensive warranty question a site operator can face.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCep only works when the brushes massage the paint\u003c\/h3\u003e\n\n\u003cp\u003eThe foam arch has to sit before the final brush or Swingtex station, or the water film won't break. Touchless machines give Cep too little mechanical friction, so the hydrophobic effect drops out completely.\u003c\/p\u003e\n\n\u003cp\u003eThe amino-siloxanes aren't passive layer-builders — they only react under pressure. The polymer's nitrogen anchors reach for the clear-coat surface like little magnets, and only once Swingtex or PE brushes press the foam into the paint do the siloxane chains line up and build the hydrophobic layer. What that means for you: without the paint massage the car comes out of the drying arch wet, the blower runs longer, and the meter ticks up with it.\u003c\/p\u003e\n\n\u003cp\u003eThe dosing pump puts out between 5 and 10 millilitres per car — no more. On older machines that ran 30 to 50 ml for other polishes, the balance between foam look and residue on the glass falls apart. A second lever: the paint surface has to stay cool, ideally under 30 °C. In direct summer sun at the exit, foamed-up Cep can dry on before the brushes reach it — and that leaves polymer spots you can only get off with the \u003ca href=\"\/products\/koch-chemie-fine-cut-f601-schleifpolitur-fein\"\u003eFine Cut F6.01\u003c\/a\u003e cutting polish.\u003c\/p\u003e\n\n\u003cp\u003eSetting up a service station from scratch? The \u003ca href=\"\/collections\/koch-chemie\"\u003eKoch-Chemie range\u003c\/a\u003e covers the full car-wash workflow: alkaline pre-wash, neutral main shampoo, Cep in the foam arch, high-pressure rinse, high-output blower. That sequence is also what keeps the machine within the industry specs for paint, plastic and chrome compatibility.\u003c\/p\u003e\n\n\u003cp\u003eThe surfactant system carries a non-ionic helper — in plain terms, a go-between for the water-hating silicone and the water. The surfactant keeps the amino-siloxanes in a foamable solution so the foam pattern stays stable. Day-to-day you notice it in the visual foam arch that operators and end customers both expect. If the foam goes too loose or collapses too fast, the surfactant helper is usually over-dosed — and Cep then gets diluted on the paint too quickly, the hydrophobic effect goes flat and the beading after the dryer disappoints.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-ceramic-effect-polish-cep-schaumpolitur_anwendung.jpg?v=1780347796\" alt=\"Foam from the Koch-Chemie Cep foam polish on dark paint during application\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCep protects, but it won't correct micro-scratches\u003c\/h3\u003e\n\n\u003cp\u003eThe Cep layer is a sacrificial layer until the next wash, not a 9H coating. If you want lasting paint protection, run Cep over a real \u003ca href=\"\/products\/koch-chemie-ceramic-allround-c0-02-keramikversiegelung\"\u003eCeramic Allround C0.02 ceramic coating\u003c\/a\u003e as the base underneath.\u003c\/p\u003e\n\n\u003cp\u003eClear-coat surfaces, painted alloy wheels, glass, plastic trim and rubber seals all take Cep without a problem. Interior materials are a hard no: leather, Alcantara, upholstery and open-pore plastics soak up the amino-siloxanes for good. On upholstery that turns into stains, on leather a slippery surface — neither comes back. Bare, non-clear-coated aluminium is out too, because Cep has no acidic cleaning action and won't shift brake dust.\u003c\/p\u003e\n\n\u003cp\u003eMicro-dosing is where it pulls ahead. Standard machine polishes sit at 10 to 20 millilitres per car, some foam preservatives even at 50 to 70 grams per car. In practice that means: at 1,000 washes a month a Cep machine gets through five to ten litres of concentrate, against 50 to 70 kilos with a 50-to-70-gram product. That is containers, logistics, storage, drum changes across shifts — the micro-dosing isn't just product cost, it is storage and labour efficiency.\u003c\/p\u003e\n\n\u003cp\u003eThe most common mistake in practice: the conveyor stopping with the foam arch running. When the line stalls, Cep sits on the paint for more than five minutes. The industrial compatibility certificate from the German Automotive Industry Association holds exactly to 300 seconds — think of it as a TÜV-style industry seal that won't attack paint, chrome or plastic inside the defined window. Past that you risk polymer burn-in, especially in summer. The fix: a conveyor-stop SOP for the staff and an emergency pressure rinse in the drying zone.\u003c\/p\u003e\n\n\u003cp\u003eFor where it fits, the rule is simple. \u003cstrong\u003eMachine line with a paint massage → Cep.\u003c\/strong\u003e Hand wash or detail work → the lighter-concentrated \u003ca href=\"\/products\/koch-chemie-ceramic-effect-shampoo-ces-autoshampoo-versiegelung\"\u003eCeramic Effect Shampoo \"Ces\"\u003c\/a\u003e from the same polymer family. Paint correction needed → a cutting or anti-hologram polish with a machine. Cep doesn't replace machine polishing — it is the final seal, not a cut and not a cleaner.\u003c\/p\u003e\n\n\u003cp\u003eCep is built as a pure B2B concentrate. In the machine room, gloves and safety glasses are mandatory kit and an eye wash has to be within reach. In the recycled-water loop Cep is unproblematic: micro-dosing of 5 to 10 ml keeps the active-ingredient concentration in the recycled water below the threshold for the treatment micro-organisms. That is also why Koch-Chemie explicitly clears Cep for biological process-water treatment systems — over-dose it and that clearance is void.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-ceramic-effect-polish-cep-schaumpolitur_ergebnis.jpg?v=1780347805\" alt=\"Hydrophobic water beading after Koch-Chemie Ceramic Effect Polish Cep on black paint\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e20-litre canister for pro machines, not for the home wash\u003c\/h3\u003e\n\n\u003cp\u003eCep is aimed at car-wash operators, gantry systems, dealerships with their own machine and specialised B2B detailers. For a hobby detailer without a dosing pump, the canister simply isn't practical.\u003c\/p\u003e\n\n\u003cp\u003eThe 20-litre pack size is built for machines with diaphragm dosing pumps. Run a gantry at a dealership and one canister covers three to six months depending on volume. A self-service bay only benefits if the dosing gear is fine enough to calibrate — most self-service foam arches sit around 30 ml, outside the Cep spec.\u003c\/p\u003e\n\n\u003cp\u003eAn established best practice from the pro side: Cep as a booster on cars already sealed with a real ceramic base like Ceramic Allround C0.02 or Ceramic Body Cb0.01. The gentle amino-siloxane top-up reactivates the beading on an older coating that has gone flat from traffic film. A fleet on a Cb coating plus a regular Cep pass typically holds its showroom gloss six to nine months longer than a fleet without that combo.\u003c\/p\u003e\n\n\u003cp\u003eRecalibrating an old machine? Best to plan the first 50 washes as a test batch: start the pump at 7 millilitres, then check the beading after the drying arch on 10 random cars. If the water sheets off flat instead of in clean beads, you are either short on foam-arch pressure or the brush contact time is too short. Only then touch the dosing. Put another way: the chemistry isn't the lever, the machine mechanics are. Cep's polymer concentration is already dialled in — everything you do as an operator tunes the activation mechanics.\u003c\/p\u003e\n\n\u003cp\u003eThe trick the manufacturer's brochure doesn't spell out: the polymer layer impregnates the machine's brushes so well that their service life climbs about 20 percent with consistent Cep use. On a typical car wash with two gantry-brush sets a year, that saves a four-figure sum in brush swaps and service work — the biggest hidden bit of economics in this concentrate, and the real reason pro sites rarely give Cep back once they have calibrated their pumps properly.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-ceramic-effect-polish-cep-schaumpolitur_lineup.jpg?v=1780347979\" alt=\"Koch-Chemie Ceramic Effect Polish Cep 20-litre canister on the workbench\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"20 liters","offer_id":57637057298767,"sku":"D1-KCX-683020","price":350.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-ceramic-effect-polish-cep.png?v=1778655965"},{"product_id":"koch-chemie-ultra-foam-uf-snow-foam-stark-schaeumender-schaum-sb-waesche","title":"Ultra Foam \"Uf\" Snow Foam \/ High-foaming foam for the self-service wash","description":"\u003ch2 id=\"speakable-headline\"\u003eSnow Foam at pH 8.5 as the sweet-spot between gentleness and cleaning power\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Ultra Foam? A slightly alkaline snow-foam concentrate (pH 8.5) for the touch-free pre-wash that sits right between the pH-neutral Gentle Snow Foam (pH 7.5) and the alkaline Active Foam (pH 9.5). NTA- and phosphate-free, 3 to 8 ml per car, a dense foam blanket with a long dwell on vertical panels. Not the pick for pure decon washes before machine polishing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKoch-Chemie Ultra Foam \"Uf\"\u003c\/strong\u003e is a highly concentrated \u003cstrong\u003eSnow Foam\u003c\/strong\u003e pre-cleaner concentrate out of Unna for the touch-free pre-wash phase. With a slightly alkaline pH of 8.5, it closes the gap between gentle, pH-neutral cleaning foams and harsh pre-cleaners that strip a natural wax in a single wash. The formula skips NTA, phosphates and EDTA.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on a high share of anionic surfactants that build stable micelles inside the foam structure — spherical surfactant arrangements that trap oily dirt at their core and carry it off with the foam via their water-soluble outer shell. What that means for you: the road film clings to the foam blanket instead of the paint, and the car visibly brightens up when you rinse it off.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-ultra-foam-uf_hero.png?v=1778702710\" alt=\"Premium sports car with road film and pollen before the snow-foam pre-wash, Koch-Chemie Ultra Foam 1L bottle in the foreground\" loading=\"lazy\" width=\"2560\" height=\"1920\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003epH 8.5 as the sweet-spot in the Koch-Chemie foam family.\u003c\/strong\u003e Gentle Snow Foam sits at pH 7.5 (gentle, but lifts little road grime), Active Foam at pH 9.5 (cuts through everything, but attacks carnauba), Super Foam goes extreme at pH 12.0. Ultra Foam delivers the cleaning power against road film without breaking down intact polymer sealants or ceramic coatings ahead of time. In practice: your sealant lasts visibly longer than it does under pH 9.5.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3 to 8 ml per car, 1:300 in the hand wash.\u003c\/strong\u003e The concentrate is calibrated for the dosing pumps of gantry wash systems. In the 20-litre drum the raw chemical cost per wash lands in the single-cent range — the economic lever that makes a throughput of 10 to 20 cars a day add up in the first place. The 1L version targets hobby detailers with a foam lance, the 5L drum is aimed at self-service bay operators.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDense foam blanket with a long dwell.\u003c\/strong\u003e Pro reviews confirm a luxurious, dense foam that clings to vertical panels for a long time. That's not just looks — the foam holds surfactants and carrier water on the bodywork instead of running straight down the sill. What that means for you: longer chemical contact in the same 5-minute window, and so more road film lifted per wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e What we see day-to-day are detailers switching over who used to run Active Foam at pH 9.5 and suddenly hit trouble with undermined sealants on their regular premium cars. The diagnosis is nearly always the same: pH 9.5 cleans reliably, but breaks down polymer sealants over the weeks. Moving to pH 8.5 cuts the alkaline load by a factor of 10 and cleans almost identically in daily work. If you run decon washes before machine polishing, stick with Active Foam — if you maintain sealants, Ultra Foam is your pick.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eMixing Ultra Foam: cold bodywork, a thin film, five minutes\u003c\/h3\u003e\n\n\u003cp\u003eSpray Ultra Foam neat onto the paint and you risk caustic stains on anodised trim — in the foam lance, pull it down to a maximum of one percent working concentration and never work it undiluted.\u003c\/p\u003e\n\n\u003cp\u003eThat concentration is also the threshold at which the mildly alkaline cleaning action visibly kicks in. In the consumption channel of gantry wash systems, dosing typically sits at 3 to 8 ml per car. In the hand wash, dilutions up to 1:300 are plenty for a straight maintenance wash. In practice that means: a 1L bottle covers around 200 car pre-washes in the hand wash, the 5L drum roughly 1,000 applications.\u003c\/p\u003e\n\n\u003cp\u003eThe bodywork has to be cold and in the shade. Above 25 degrees of air temperature or in direct sun, the carrier water dries off faster than the mild alkali can work — the local concentration climbs, and you get water spots on the paint or milky haze on anodised aluminium trim. From what we see day-to-day: always check paint temperature with the flat of your hand; if the paint feels warm, hit it with a flush of water first until it's below skin temperature.\u003c\/p\u003e\n\n\u003cp\u003eApply in cross passes from the bottom up so run-off marks don't dry on. Five minutes dwell at most, then rinse it off completely with the pressure washer. On heavily soiled cars a second pass always beats letting it sit longer — the \u003ca href=\"\/collections\/snow-foam\"\u003esnow-foam pre-wash\u003c\/a\u003e is a touch-free lead-in step, not a soaking bath.\u003c\/p\u003e\n\n\u003cp\u003eIn winter the concentrate turns viscous. In unheated self-service bays the viscosity loses its flow and the dosing pump draws unevenly. The pro fix: pre-dilute the concentrate in the supply tank with warm water to 1:5 to 1:10 before it hits the venturi valve of the lance. That solves two problems at once — pump cavitation with cold concentrate and an uneven foam pattern with basic foam cannons. A \u003ca href=\"\/collections\/schaumsprueher\"\u003efoam cannon\u003c\/a\u003e from 100 bar of pressure gives you the mechanical headroom that offsets swings in concentrate viscosity.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-ultra-foam-uf_anwendung.png?v=1778702708\" alt=\"Snow-foam pre-wash with foam lance and pressure washer on a premium car, half-foam half-dirty fender showing the cleaning action\" loading=\"lazy\" width=\"2560\" height=\"1920\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSubstrates, sealants, limits: where the sweet-spot ends\u003c\/h3\u003e\n\n\u003cp\u003eUltra Foam is safe on intact clear coats, unpainted polypropylene bumpers (the thermoplastic polymer that modern bumpers and trim are made from), glass and rubber seals. Applied correctly it leaves neither streaks nor water spots — provided you keep to the five-minute rule and the bodywork sits in the shade.\u003c\/p\u003e\n\n\u003cp\u003eOn sealants the real strength of pH 8.5 shows: modern ceramic coatings made of cross-linked silicon oxides — the covalent Si-O-Si matrix, a three-dimensional glass network on the paint — are unfazed by the mildly alkaline surfactant solution, because those bonds are orders of magnitude more chemically stable than the ester film of a wax. What that means for you: your coating's lifespan stays intact. Polymer sealants also last noticeably longer than under pH 9.5 — that factor of 10 in alkaline concentration translates directly into measurably longer protection-layer life.\u003c\/p\u003e\n\n\u003cp\u003eThe honest limitation: thinly applied carnauba waxes can still be undermined under weekly high concentration (1:10 instead of 1:100). Carnauba is a plant-based ester wax that gets broken down bit by bit by repeated contact with alkali. If you maintain a hand wax as a value-protecting layer, you don't run Ultra Foam at full strength as a weekly maintenance foam — for that niche the pH-neutral \u003ca href=\"\/products\/koch-chemie-gentle-snow-foam-gsf-reinigungsschaum\"\u003eGentle Snow Foam \"Gsf\"\u003c\/a\u003e stays the better call, same maker, different use case.\u003c\/p\u003e\n\n\u003cp\u003eOn glass and unpainted polypropylene the product is uncritical as long as it doesn't dry on. On glass, baked-on alkali leaves a mineral haze that only an acidic glass cleaner will shift again. Rubber seals take short exposures perfectly fine; with constant use or concentrations above one percent the alkali pulls out plasticisers and the lip goes brittle — the same mechanism as with the stronger sibling products, just much slower.\u003c\/p\u003e\n\n\u003cp\u003eOff-limits are hot brake discs after a motorway run, black bonnets in the midday sun, sun-exposed dark wheels — everywhere the water flashes off too fast and the surfactants burn into the clear coat as light streaks.\u003c\/p\u003e\n\n\u003cp\u003eThe concentrate is classified as irritating to skin and eyes. When handling it, chemical-resistant protective gloves and tight-fitting safety goggles are part of the kit. The diluted product in the foam lance no longer irritates at that strength, but a splash in the eye still needs flushing out straight away.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-ultra-foam-uf_ergebnis.png?v=1778702710\" alt=\"Dense snow-foam blanket on vertical bodywork with a long dwell, door and sill fully covered in foam\" loading=\"lazy\" width=\"2560\" height=\"1920\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e1L hobby, 5L pro, 20L bulk drum for three user groups\u003c\/h3\u003e\n\n\u003cp\u003eBuy the wrong size and you either pay twice or end up storing concentrate that loses its flow over time — Ultra Foam comes in three clearly separated sizes.\u003c\/p\u003e\n\n\u003cp\u003eThe 1-litre bottle is meant for hobby detailers and testers who want to get to know the product before stepping up to larger amounts. The 5-litre drum addresses self-service bay operators and smaller detailing businesses that refill weekly. The 20-litre canister targets gantry wash systems, commercial detailers with high throughput and haulage firms with their own wash bay — at a consumption of 5 ml per car the canister covers around 4,000 vehicles and correspondingly long reorder cycles.\u003c\/p\u003e\n\n\u003cp\u003eThe special niche where Ultra Foam competes economically against its own sibling products is the premium detailer. If you prep ex-lease returns with a spray sealant to follow, you want a foam that gets the paint uncompromisingly clean in under five minutes — without already starting to break down the next car's sealant.\u003c\/p\u003e\n\n\u003cp\u003eActive Foam at pH 9.5 cleans a touch faster, but breaks down polymer sealants over the weeks. Gentle Snow Foam at pH 7.5 preserves the sealant perfectly, but leaves bug splatter and summer sap sitting on the front end. Ultra Foam lands exactly in between.\u003c\/p\u003e\n\n\u003cp\u003eWhat makers rarely flag prominently: Ultra Foam replaces the DIY cocktails that pro detailers used to mix — pH-neutral foam with a splash of all-purpose cleaner — to bump up the cleaning power for a while. Those mixes are chemically unstable, the cleaning action swings from batch to batch.\u003c\/p\u003e\n\n\u003cp\u003eUltra Foam delivers the mildly alkaline pre-mix as a repeatable, stable formula straight out of the canister — the decisive time advantage for businesses with repeatable workflows. If you run a commercial \u003ca href=\"\/collections\/koch-chemie\"\u003eKoch-Chemie range\u003c\/a\u003e as standard kit and have no time for your own chemical cocktails, you'll find the ready-made sweet-spot in the foam family right here.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-ultra-foam-uf_lineup.png?v=1778702710\" alt=\"Koch-Chemie Ultra Foam range, 1L bottle and 20L canister side by side, three drum sizes for hobby detailers, self-service bays and commercial detailers\" loading=\"lazy\" width=\"1920\" height=\"2560\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n","brand":"Koch-Chemie","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57637103731023,"sku":"D1-KCX-702-1L-01","price":8.99,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":57637103796559,"sku":"D1-KCX-702-5L-01","price":31.99,"currency_code":"EUR","in_stock":true},{"title":"20 liters","offer_id":57637103829327,"sku":"D1-KCX-702-20L-01","price":111.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-ultra-foam-uf_0fb2c821-7fb0-4fac-be97-913c94e4091a.png?v=1778750571"}],"url":"https:\/\/detailing1.co\/collections\/koch-chemie-ratgeber-20-liter.oembed","provider":"Detailing1","version":"1.0","type":"link"}