{"title":"THE FINISHER × Koch-Chemie","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie – no-compromise system care for automotive and marine\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat makes THE FINISHER special? — The line brings precise Koch-Chemie formulations together into one clear, coordinated system for paint, glass, interior, gelcoat \u0026amp; vinyl – results you feel fast, easy application, a reliable routine for road and water.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER\u003c\/strong\u003e is our curated detailing line built on proven Koch-Chemie technology – put together to give you a logical, hands-on care routine for automotive and marine. From a safe pre-wash to a high-gloss finish the products work into each other: you work faster, dodge the usual application mistakes and hit repeatable results on paint, glass, plastics, leather, fabric and on gelcoat and boat deck. Care stops feeling like an experiment and starts feeling like a system – on land just as much as on the water.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA system, not a patchwork:\u003c\/strong\u003e cleaners, polishes, shampoos and sealants are matched to each other – for clean processes, less mixing of brands and results you can count on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency you can see and feel:\u003c\/strong\u003e strong cleaning power, excellent glide and wipe-off, stable beading – with clear, simple working steps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo worlds, one logic: \u003c\/strong\u003ededicated solutions for automotive surfaces and marine demands (salt, UV, gelcoat), with the same intuitive handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAutomotive detailing – from pre-wash to high gloss\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive detailing\u003c\/strong\u003e starts with a safe pre-clean, runs through material-friendly interior care and ends in a hard-wearing paint finish. For glass, ClearView and DisplayExpert give you streak-free vision and gentle infotainment cleaning; inside, InsideUp (cleaning) and InsideCare\/InsideCare (conditioning) work hand in hand. Outside you lay the base with InsectOff and pH-neutral foams like TropicSnow before MagicShampoo tops up gloss and protection. Wheels? WheelKing lifts brake dust reactively and acid-free. For a quick shot of gloss you reach for JustPerfect as a quick detailer – perfect right after the wash. On paint defects, our stepped polishes – RoughCut\/FineCut, PowerSpeedPolish or ShineSpeedPolish – bring clarity back to the surface; then a spray or wax finish locks the work in. What you get is a closed, smooth workflow from the first spray to the final buff-off.\u003c\/p\u003e\n\u003ch3\u003eMarine detailing – gelcoat, vinyl \u0026amp; deck under control\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMarine detailing\u003c\/strong\u003e plays by its own rules: salt, UV and large gelcoat areas call for products with real staying power at sea. CleanMarine lays the clean base as a universal boat shampoo. On windows and polycarbonate, SeaYou goes to work – formulated for clear vision with no smearing. VinylTexClean pulls dirt out of upholstery deep in the pores; VinylGuard conditions and protects with a nice feel in the hand. RubMarine freshens up unpainted plastics and rubber, silicone-free. For the big paint and gelcoat show we've got the stepped polish chain: RoughCut (step 1) for deeper defects, FineCut (step 2) for holograms and streaks, PerfectOne as a powerful one-step or WaxPolish as a classic hard-wax finish. BodyGuard rounds it off with a hydrophobic spray sealant; HelloWhite visibly brings yellowed areas back and CoverGuard protects fabrics on board for the long haul. The upshot: smooth surfaces, easier cleaning, clean water run-off – and a cockpit that still looks fresh after long trips.\u003c\/p\u003e\n\u003ch3\u003eApplication \u0026amp; workflow – clear steps, low risk\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSystem care\u003c\/strong\u003e means you work by material, cleanly split into steps and with the right tools. Outside you always start cool (no hot surfaces), never let chemistry dry on and rinse thoroughly. Give reactive wheel cleaners their dwell time and back them up mechanically with brushes – then rinse off with pressure. Lay foam shampoo or pre-cleaner on across the panel to encapsulate dirt; on the hand wash the care shampoo gives you glide and protects any sealant already there. Run polishes panel by panel in a cross pattern, match pad hardness and cut to the defect and buff residue out completely. Inside you work \"dirty to clean\": cleaner first (InsideUp, LeatherTexClean, VinylTexClean), then conditioner (InsideCare\/InsideCare, LeatherLock, VinylGuard); clean sensitive displays separately with DisplayExpert. On the boat the prep (degrease, dry) is what counts before you apply BodyGuard or CoverGuard – that's how the hydrophobicity and the easy-to-clean effect hold noticeably longer.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWho is THE FINISHER from Koch-Chemie for?\u003cbr\u003e\u003c\/strong\u003eFor ambitious enthusiasts and pros who want a well-thought-out, fast workflow with repeatable results on vehicles and boats – without a jungle of products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does automotive differ from marine?\u003c\/strong\u003e\u003cbr\u003eMarine products are optimised for gelcoat, vinyl, UV and salt-water exposure. Automotive covers paint, glass, wheels and interior in everyday road use – both worlds follow the same simple logic.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","products":[{"product_id":"koch-chemie-the-finisher-automotive-clearview-glasreiniger","title":"THE FINISHER \"ClearView\" Glass Cleaner","description":"\u003ch2\u003eTHE FINISHER „ClearView“ — glass cleaner for crystal-clear vision\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat's ClearView for? — This low-residue glass cleaner pulls fingerprints, dust, nicotine and road film off fast and streak-free, runs off in a controlled way, and leaves glass and mirrors clear inside and out – perfect as the last step after the wash.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER ClearView glass cleaner\u003c\/strong\u003e gives you calm, streak-free vision in minutes on any car. Its finely balanced formula lifts skin oils, dust and light water spots, flashes off cleanly and leaves no streaks – not even in backlight. Outside, you finish the windscreen, side and rear glass after the wash; inside, you wipe film and fingerprints away with no greasy residue. Displays stay DisplayExpert's job; plastic windows aren't in ClearView's wheelhouse.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast \u0026amp; streak-free: \u003c\/strong\u003ecuts through finger oils\/nicotine film and evaporates clear – great for sharp contrast and calm night vision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled flash-off: \u003c\/strong\u003ewets evenly, doesn't run and doesn't smear – two cloths and you're done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem logic: \u003c\/strong\u003ethe perfect finish after TropicSnow\/MagicShampoo; give the wiper blades a quick wipe too for a calm wiper sweep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eGlass cleaner – streak-free formula \u0026amp; calm finish\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003eglass cleaner\u003c\/strong\u003e like ClearView works off a mild, low-residue active base: skin oils and road film let go, and the solution wipes away with no haze. Contrast stays crisp and reflections stay calm. Because ClearView flashes off in a controlled way, you can work big panels one at a time without having to „buff it back later“. The result is a neutral, low-glare finish – exactly what you want for night drives and backlight.\u003c\/p\u003e\n\u003ch3\u003eOn the car – wiping it right, inside \u0026amp; out\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use it\u003c\/strong\u003e: always in the shade and on cool glass. Spray the product \u003cem\u003einto the cloth\u003c\/em\u003e (not straight onto sensor\/camera areas), wipe the panel in straight passes and follow up dry with a fresh microfibre side. Inside: top edge first, so nothing runs down. Outside: pull off any leftover moisture after the wash, go easy with ClearView and buff it out streak-free. Treat mirrors and camera windows panel by panel. Give the wiper blades a quick wipe too – it keeps the wiper sweep steady for the long run.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; limits – tints, films, special cases\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e: automotive glass \u0026amp; mirrors, inside and out. Factory tints are no problem; with aftermarket tint film, test a hidden spot first and always spray into the cloth. Not for displays (use DisplayExpert) and not for plastic windows\/polycarbonate. Stubborn, baked-on mineral spots may need a careful glass polish; ClearView is the fast, streak-free everyday cleaner.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER „ClearView“ — glass cleaner\u003c\/h2\u003e\n\u003ch4\u003eSpray straight onto the glass or into the cloth?\u003c\/h4\u003e\n\u003cp\u003eInside, always spray into the cloth to protect sensors\/edges. Outside you can spray straight onto the panel one at a time, then spread it right away and follow up dry.\u003c\/p\u003e\n\u003ch4\u003eDoes ClearView stay streak-free in backlight?\u003c\/h4\u003e\n\u003cp\u003eYes, the formula flashes off clear. What matters is clean, dense microfibre cloths and working in the shade.\u003c\/p\u003e\n\u003ch4\u003eGood for tinted glass too?\u003c\/h4\u003e\n\u003cp\u003eFactory tints, yes. With film, test a hidden spot first and always spray into the cloth – don't flood it.\u003c\/p\u003e\n\u003ch4\u003eCan I clean displays with it?\u003c\/h4\u003e\n\u003cp\u003eNo. For touchscreens, digital clusters and piano-black inlays use DisplayExpert – ClearView is made for glass.\u003c\/p\u003e\n\u003ch4\u003eDoes ClearView help with water spots?\u003c\/h4\u003e\n\u003cp\u003eLight ones, yes. Baked-on limescale rings need a dedicated glass polish. After that, use ClearView for the day-to-day upkeep.\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56296894660943,"sku":"D1-KCX-77703-500ML-01","price":6.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-clearview-glasreiniger_500ml_77703-500ML-01.png?v=1764165601"},{"product_id":"koch-chemie-the-finisher-automotive-insideup-innenraumreiniger","title":"THE FINISHER \"InsideUp\" Interior Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „InsideUp“ — interior cleaner for clean surfaces inside the cabin\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eHow does InsideUp handle day-to-day work? — This ready-to-use interior cleaner lifts skin oils, dust, drink residue and nicotine film off plastic, leather, textile and vinyl without attacking the material, dries streak-free and sets up the perfect base for whatever care comes next, on the road or on the water.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER InsideUp interior cleaner\u003c\/strong\u003e is your go-to cleaner for the dash, seats, door cards and cabin. The balanced surfactant formula traps grime, breaks down everyday films safely and leaves a clean, grippy surface with no smearing. In automotive interiors it works fast and rinses clean; out on the water it pulls salt film and sunscreen residue off without a fight. As a system product it's the ideal base before you treat and protect surfaces with InsideCare, LeatherLock, TexLock or VinylGuard.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficient deep cleaning:\u003c\/strong\u003e traps oils and particles, cuts down friction as you wipe and so keeps soft-touch plastics from roughening up or going shiny.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGentle \u0026amp; controlled:\u003c\/strong\u003e pH-balanced, short flash-off time, clean drying – ideal for the mix of materials in a cabin (plastic, leather, textile, vinyl).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect system base: \u003c\/strong\u003eonce it's clean, care products and sealants grip noticeably better; works with InsideCare, LeatherLock, TexLock, VinylGuard and the gentle DisplayExpert for screens.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eInterior cleaner – technology \u0026amp; material compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInterior cleaners\u003c\/strong\u003e like \u003cstrong\u003eTHE FINISHER InsideUp\u003c\/strong\u003e run on a finely tuned balance of surfactants and solvents: oils, sugar and dust get locked into micelles, so you can pick them up safely with a microfibre cloth instead of smearing them around. The formula is pH-balanced enough for daily use and works on the usual car and cabin materials – from grained plastic through coated leather to textile and marine vinyl. Clean soft-touch surfaces with minimal pressure; screens you handle separately with DisplayExpert. For tougher stains on leather\/textile, go in with LeatherTexClean; on vinyl\/textile in a marine setting, VinylTexClean really shows what it can do. THE FINISHER InsideUp interior cleaner stays deliberately residue-free, so care products draw in evenly afterwards.\u003c\/p\u003e\n\u003ch3\u003eAutomotive – a structured approach inside the cabin\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive\u003c\/strong\u003e means lots of material changes in a tight space. Work panel by panel: put the product on the cloth, or for heavier grime spray it sparingly onto the surface, let it dwell briefly, lift it out of the texture with a soft brush and take it off with a fresh microfibre side. THE FINISHER InsideUp interior cleaner keeps streaks from forming and gives you a natural feel that's never greasy. Once it's clean, lock in the result to match: plastics with InsideCare, smooth leather with LeatherLock, textile surfaces with TexLock. For touchscreens, piano-black inlays and infotainment the rule is: don't wipe them with all-purpose cloths – reach for DisplayExpert to keep micro-scratches and streaks away. That way the cabin stays visually calm and clean to the touch.\u003c\/p\u003e\n\u003ch3\u003eMarine – cabin, cockpit \u0026amp; vinyl handled with ease\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMarine\u003c\/strong\u003e surfaces take a constant beating from salt, UV and sunscreen. THE FINISHER InsideUp interior cleaner clears the typical salt haze off consoles and trim and breaks down lotion residue on upholstery without drying the vinyl out. Never work in full sun and don't let the cleaner dry on; after a short dwell you wipe over damp and dry off with a second cloth. On vinyl upholstery you get a clean, grippy finish – ideal as prep for VinylGuard. Get the textiles aboard clean with InsideUp before you lock in the easy-to-clean properties with CoverGuard or TexLock. For windows and polycarbonate reach for SeaYou; unpainted plastics get their looks back with RubMarine after cleaning.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „InsideUp“ — interior cleaner\u003c\/h2\u003e\n\u003ch4\u003eCan I use InsideUp on leather?\u003c\/h4\u003e\n\u003cp\u003eYes, on coated\/sealed leather. Always test in a hidden spot first. For stubborn stains LeatherTexClean helps; then care for it with LeatherLock to lock in the feel and colour depth.\u003c\/p\u003e\n\u003ch4\u003eHow do I use InsideUp the right way?\u003c\/h4\u003e\n\u003cp\u003eWork panel by panel: spray onto the cloth, let it dwell briefly, move it around with a brush\/cloth and take it off with a clean side. Don't let it dry on, don't over-treat, and finish with a dry wipe.\u003c\/p\u003e\n\u003ch4\u003eIs InsideUp suitable for displays?\u003c\/h4\u003e\n\u003cp\u003eFor sensitive screens please use DisplayExpert. InsideUp is dialled in for plastic, leather, textile and vinyl, where it works streak-free and gentle on the material.\u003c\/p\u003e\n\u003ch4\u003eDoes InsideUp work on a boat too?\u003c\/h4\u003e\n\u003cp\u003eYes. It pulls salt film and sunscreen residue out of the cockpit and cabin. Afterwards apply VinylGuard or InsideCare to make cleaning easier and protect surfaces from getting dirty again fast.\u003c\/p\u003e\n\u003ch4\u003eIs InsideUp concentrated or ready-to-use?\u003c\/h4\u003e\n\u003cp\u003eReady-to-use. For light dirt, just putting it on the cloth is enough. Don't cut it with water, so you keep the cleaning power and the streak-free drying.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299219910991,"sku":"D1-KCX-77705-500ML-01","price":7.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-insideup-innenraumreiniger_500ml_77705-500ML-01.png?v=1761908042"},{"product_id":"koch-chemie-the-finisher-automotive-insidecare-innenraumpflege","title":"THE FINISHER \"InsideCare\" Interior Care","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „InsideCare“ — interior care with a natural OEM finish\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat's InsideCare for? — This interior care feeds and protects plastic, rubber and vinyl after cleaning, lays down a satin-matte OEM finish, works anti-static and leaves a dry, non-greasy feel – in car and boat.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER InsideCare interior care\u003c\/strong\u003e is your material-friendly care for the cockpit, door cards, consoles, rubber seals and vinyl surfaces. It brings colour depth back, cuts dust pickup thanks to anti-static additives and gives a calm, satin-matte look with no greasy shine. In automotive interiors InsideCare brings textured parts back out evenly; on the water it stabilises vinyl and plastic against the usual hits like salt, UV and constant wiping. Important: always-on in the system – after cleaning with InsideUp, lay it down, then add LeatherLock (leather) or VinylGuard (vinyl) depending on the material.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSatin-matte OEM finish: even colour depth with no shiny patches; a nice, dry feel that keeps controls grippy.\u003c\/li\u003e\n\u003cli\u003eAnti-static \u0026amp; nourishing: cuts dust pickup, freshens up plastics that look dried out and makes day-to-day care easier.\u003c\/li\u003e\n\u003cli\u003eSystem-compatible: the perfect step after InsideUp; plays well with LeatherLock (leather), VinylGuard (vinyl) and TexLock (textile protection – don't apply over it, just add alongside).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eInterior care – technology, finish \u0026amp; knowing your materials\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInterior care\u003c\/strong\u003e means: conditioning surfaces after cleaning without faking the feel. THE FINISHER InsideCare works with nourishing polymers and additives that flash off evenly and leave a satin-matte, near-OEM finish. Heavy-gloss dressings often look out of place in modern interiors; here InsideCare deliberately gives you a restrained look with a defined grip. On textured plastics the product spreads homogeneously, so matte areas don't go blotchy. Vinyl gets a fresh, rich look without smearing. Rubber seals look better and stay supple. The order matters: clean first (InsideUp), then care (InsideCare) and only protect on top when you need to (e.g. VinylGuard on vinyl). Displays, piano black and glass aren't a job for interior care – that's what DisplayExpert and ClearView are there for.\u003c\/p\u003e\n\u003ch3\u003eAutomotive – apply, buff off, lock in the feel\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive\u003c\/strong\u003e surfaces live on a calm look and a dry feel. Work panel by panel: put InsideCare thinly onto a soft applicator pad or microfibre, spread it evenly and let it flash off for 1–2 minutes. Then wipe gently with a clean side of the cloth until the surface looks evenly satin-matte. Keep it off the steering wheel, gear knob and pedals – there a plain clean (InsideUp) is enough, because grip is what counts. On badly faded plastics you can repeat the coat once it's fully flashed off. After care dust comes off more easily and fingerprints show up less. For leather the line stays clear: clean with InsideUp or target it with LeatherTexClean, then care with LeatherLock. Clean textiles separately and protect them optionally with TexLock – InsideCare doesn't belong on fabric.\u003c\/p\u003e\n\u003ch3\u003eMarine – vinyl \u0026amp; plastics in the cockpit and cabin\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMarine\u003c\/strong\u003e environments need care that feels tough and is easy to top up. On boat vinyl, console and cabin plastics you use InsideCare after a thorough clean with InsideUp. The product lays down thin and even, cuts that typical salt-haze look and gives a rich, non-greasy surface. Work in the shade on cool materials – direct sun or hot surfaces shorten the flash-off time and can lead to patchy results. Upholstery and large vinyl that's more exposed you can lock in with VinylGuard if needed; that keeps cleaning easier and the feel consistent for longer. InsideCare isn't meant for gelcoat exteriors – out there you reach for CleanMarine, the polishing chain (RoughCut\/FineCut\/PerfectOne) and finally BodyGuard for the hydrophobic protection. In the cabin: glass with SeaYou, clean textile surfaces first then optionally protect with CoverGuard\/TexLock – InsideCare stays on the hard interior surfaces.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „InsideCare“ — interior care\u003c\/h2\u003e\n\u003ch4\u003eWhich materials do I apply InsideCare to?\u003c\/h4\u003e\n\u003cp\u003eTo plastic, vinyl and rubber inside. Don't use it on glass, piano black, pedals\/steering wheel or textile. Leather you care for after cleaning with LeatherLock.\u003c\/p\u003e\n\u003ch4\u003eHow do I get an even finish?\u003c\/h4\u003e\n\u003cp\u003ePut it thinly on a pad\/cloth, spread evenly, let it flash off briefly and wipe gently with a clean side. Don't work in the sun, and don't drown the surface in product.\u003c\/p\u003e\n\u003ch4\u003eDoes InsideCare shine a lot?\u003c\/h4\u003e\n\u003cp\u003eNo. It gives a satin-matte, near-OEM look with a dry feel – no greasy film and no shiny patches.\u003c\/p\u003e\n\u003ch4\u003eCan I use InsideCare on a boat?\u003c\/h4\u003e\n\u003cp\u003eYes, ideal for vinyl and plastic surfaces in the cockpit and cabin. After cleaning with InsideUp lay it down thin, buff it off evenly; lock in exposed vinyl with VinylGuard if you like.\u003c\/p\u003e\n\u003ch4\u003eHow often should I top it up?\u003c\/h4\u003e\n\u003cp\u003eDepends on use and cleaning. In the car usually every 4–8 weeks, on board after hard trips or thorough cleans. Work thin and even, without building up layers.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299253236047,"sku":"D1-KCX-77706-500ML-01","price":10.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-insidecare-innenraumpflege_500ml_77706-500ML-01.png?v=1761908410"},{"product_id":"koch-chemie-the-finisher-automotive-leathertexclean-leder-textilreiniger","title":"THE FINISHER \"LeatherTexClean\" Leather \u0026 Textile Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „LeatherTexClean“ — leather \u0026amp; textile cleaner for stain-free seats \u0026amp; panels\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use LeatherTexClean for? — This targeted leather \u0026amp; textile cleaner lifts body oils, denim transfer and drink stains gently from coated leather and fabric, dries off cleanly and sets the perfect base for the care and protection that follows – in the car and on board.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER LeatherTexClean leather \u0026amp; textile cleaner\u003c\/strong\u003e is your precise spot and surface cleaner for seats, side bolsters, door inlays and fabric covers. The balanced surfactant mix lifts oils and pigments in a controlled way, so you pull dirt safely into the cloth instead of smearing it around. In automotive interiors it works colour-stable and residue-free; on the water it removes salt film and sunscreen from fabric and coated leather. As a system block it backs up InsideUp (all-round cleaning) and preps leather perfectly for LeatherLock, and textiles for TexLock\/CoverGuard.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpot-on stain removal:\u003c\/strong\u003e lifts body oils, denim transfer, coffee\/soft drinks and light everyday dirt without changing the feel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGentle \u0026amp; controlled:\u003c\/strong\u003e pH-balanced, fine-pore foam, short flash-off time; ideal for coated leather and tough textiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem fit:\u003c\/strong\u003e perfect prep for LeatherLock (leather care) and TexLock\/CoverGuard (textile protection); noticeably cuts down on re-soiling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eLeather cleaner – coated leather, seams \u0026amp; colour transfer\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLeather cleaners\u003c\/strong\u003e like THE FINISHER LeatherTexClean leather \u0026amp; textile cleaner work with mild, low-solvent surfactants that lift oils and dyes out of the structure without softening the coating. Spray onto the cloth, or for heavier dirt lightly onto the panel, work it into the grain with a soft leather brush and wipe straight off with the fresh microfibre side. With denim transfer you feel your way in small sections; you only step up the pressure once the colour visibly gives. Not suitable for open-pore aniline or nubuck\/suede. After cleaning, let it dry and care for it with LeatherLock so the feel and colour depth stay stable and new dirt has a harder time sticking.\u003c\/p\u003e\n\u003ch3\u003eTextile cleaner – treat seats, carpet \u0026amp; Alcantara with care\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTextile cleaners\u003c\/strong\u003e built on controlled foam like THE FINISHER LeatherTexClean leather \u0026amp; textile cleaner work best after a thorough vacuum. Treat stains from the outside in, let them break up briefly, lift with a textile brush or fibre pad and take them up with a clean, slightly damp cloth. Keep it from over-wetting so you don't get water marks. On Alcantara use a minimal dose only, spray into a corner of the cloth and work fibre-friendly with a very soft brush; then dab dry. Once it's fully dry you finish with TexLock or CoverGuard for a protective, „easy-to-clean“ topcoat – especially worth it on heavily used seats and walk-in zones.\u003c\/p\u003e\n\u003ch3\u003eAutomotive \u0026amp; marine – routine, compatibility \u0026amp; results\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive \u0026amp; marine\u003c\/strong\u003e differ in the load, not the steps: clean → dry → care\/protect. In the car THE FINISHER LeatherTexClean leather \u0026amp; textile cleaner is your step for targeted leather and fabric spots when InsideUp as an all-rounder isn't enough. On the boat you take salt film and sunscreen off fabric and coated leather; large vinyl areas belong with VinylTexClean instead and are conditioned afterwards with VinylGuard. Keep it off hot surfaces and out of direct sun, never let the chemistry dry on and work panel by panel. The result: clean, matte leather with no greasy shine and fresh textiles with no marks – perfectly prepped for long-lasting care and protective layers.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „LeatherTexClean“ — leather \u0026amp; textile cleaner\u003c\/h2\u003e\n\u003ch4\u003eIs LeatherTexClean suitable for all leather types?\u003c\/h4\u003e\n\u003cp\u003eFor coated\/sealed smooth leather, yes. Please rule out open-pore aniline and nubuck\/suede. Always test in a hidden spot and care for it with LeatherLock after cleaning.\u003c\/p\u003e\n\u003ch4\u003eCan I clean Alcantara with it?\u003c\/h4\u003e\n\u003cp\u003eYes, but very carefully: minimal dose, onto the cloth, move it gently with a soft brush and dab dry. No over-wetting, no rubbing, always run a test patch.\u003c\/p\u003e\n\u003ch4\u003eHow do I remove denim transfer?\u003c\/h4\u003e\n\u003cp\u003eWork small areas: product onto the cloth, lift into the grain with a leather brush, take it off straight away with a clean cloth side. Only step up the pressure if the colour visibly gives; then apply LeatherLock.\u003c\/p\u003e\n\u003ch4\u003eDo I need a wet vac?\u003c\/h4\u003e\n\u003cp\u003eNot for normal stains. For deep textile dirt a wet vac can help pull residue out after you've broken it up. Always wet moderately to avoid water marks.\u003c\/p\u003e\n\u003ch4\u003eIs the product suitable for marine use?\u003c\/h4\u003e\n\u003cp\u003eYes, for fabric and coated leather in the cabin and cockpit. Salt and sunscreen residue lifts off well. Please clean vinyl with VinylTexClean and protect it with VinylGuard.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31\/10\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299307532623,"sku":"D1-KCX-77713-500ML-01","price":12.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-leathertexclean-leder-textilreiniger_500ml_77713-500ML-01.png?v=1761908704"},{"product_id":"koch-chemie-the-finisher-automotive-magicshampoo-pflegeshampoo","title":"THE FINISHER \"MagicShampoo\" Care Shampoo","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „MagicShampoo“ — Care Shampoo for noticeably more gloss \u0026amp; glide\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does MagicShampoo do? — This pH-neutral care shampoo visibly tops up the protection you already have, ramps up the glide that fends off wash marks, gets water beading hard and leaves a deep, slick surface – in a quick hand wash for road and sea.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER MagicShampoo care shampoo\u003c\/strong\u003e is your easy gloss-and-protect wash for painted surfaces, wraps\/PPF and smooth plastics. Polymer care agents back up the wax, spray and coating layers already on the car, while balanced surfactants safely encapsulate dirt. The result: noticeably more glide, less friction while you wash and a deep, clean finish. In day-to-day car care it's the ideal wash partner after pre-cleaning; out on the water it brings back gelcoat gloss and makes the next clean easier – without leaving the feel greasy and without streaks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCares while you wash:\u003c\/strong\u003e Builds noticeable slickness, supports beading\/sheeting and stabilises the protection you already have instead of stripping it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGentle \u0026amp; efficient:\u003c\/strong\u003e pH-neutral formula with high glide cuts the risk of wash marks during hand washing – especially on dark paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the system:\u003c\/strong\u003e Perfect after TropicSnow\/InsectOff and before BodyGuard or JustPerfect; on the boat as a gloss kick after the base wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003epH-neutral care shampoo – glide additives, dirt removal \u0026amp; protection build-up\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003epH-neutral care shampoo\u003c\/strong\u003e like THE FINISHER MagicShampoo care shampoo pairs a gentle surfactant base with caring polymers. When it meets road film, dust and organic residue, particles get locked into micelles, and the glide additives cut the contact friction between your wash mitt and the surface. That's how you keep micro-scratches down, while the care agents dry as a thin film and visually refresh the LSPs you already have (wax, spray sealant, coating): more slickness, deeper gloss, clean water beading. The formula deliberately skips aggressive solvent boosters – that keeps your protection intact and makes the wash forgiving. Matte paint\/wraps stay matte, because the shampoo works without any \"wet-look overload\"; on high-gloss surfaces the effect shows up as a calm, deep shimmer.\u003c\/p\u003e\n\u003ch3\u003eAutomotive – hand wash, dosing \u0026amp; compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive\u003c\/strong\u003e hand washing works best in a structured run: pre-clean with TropicSnow and InsectOff, wheels separately with WheelKing, then the two-bucket wash with THE FINISHER MagicShampoo care shampoo. How you go about it: in the shade, cool surface, dose the shampoo per the maker's spec, foam it up in the bucket and wash top to bottom. The high lubrication film keeps the mitt gliding; dirt gets rinsed away safely before you hit the next section. After a thorough rinse, dry with a clean towel. For extra pop you can boost the wet surface with BodyGuard, or reach for JustPerfect once it's dry – both build on the slickness the wash already topped up. MagicShampoo plays nice with waxes, spray sealants and ceramic coatings; it keeps the protection rather than stripping it. For sensitive zones like piano-black trim always work with a fresh towel face, never \"rub\" in circles – the glide does its best work in clean cross-hatch passes.\u003c\/p\u003e\n\u003ch3\u003eMarine – gelcoat gloss, salt film \u0026amp; easy-to-clean out on the water\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMarine\u003c\/strong\u003e surfaces go dull fast after a salty run. First rinse down with fresh water across a wide area so salt and sand particles come off. Then bring in THE FINISHER MagicShampoo care shampoo as your gloss wash: the surfactants lift organic residue, the care agents smooth the gelcoat noticeably, so water sheets off faster later and dirt has a harder time grabbing on. On textured anti-slip decks or rough GRP go with CleanMarine; MagicShampoo belongs on smooth, glossy areas. Keep it off teak, matte zones and textile deck coverings. Work in the shade, let nothing dry on and rinse generously. For vinyl upholstery the routine stays separate (VinylTexClean + VinylGuard); on glass you reach for SeaYou. As a marine finish after the wash, BodyGuard gives the hydrophobic kick that makes the next clean easier, especially after a longer spell sitting in the water.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „MagicShampoo“ — Care Shampoo\u003c\/h2\u003e\n\u003ch4\u003eDoes MagicShampoo strip existing sealants?\u003c\/h4\u003e\n\u003cp\u003eNo. It's built pH-neutral and is meant to visibly refresh the wax, spray and coating layers you already have, not remove them – ideal for regular maintenance washes.\u003c\/p\u003e\n\u003ch4\u003eCan I run it through a foam cannon too?\u003c\/h4\u003e\n\u003cp\u003eIt's mainly designed for bucket washing. For pre-wash\/foam use TropicSnow; then you wash with MagicShampoo for slickness and protection.\u003c\/p\u003e\n\u003ch4\u003eWhich surfaces is it suited for?\u003c\/h4\u003e\n\u003cp\u003ePaint, gelcoat, PPF\/wrapped high-gloss surfaces and smooth plastics. Steer clear of matte paint\/wraps, anti-slip decks, teak and textiles – use other system products there.\u003c\/p\u003e\n\u003ch4\u003eHow do I prevent wash marks?\u003c\/h4\u003e\n\u003cp\u003eWork in the shade, take the pre-wash seriously, two-bucket method, fresh wash mitt, rinse often. The high glide of MagicShampoo gives you a clear extra hand.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on boats running in salt water?\u003c\/h4\u003e\n\u003cp\u003eYes. After a thorough fresh-water rinse, MagicShampoo brings back gelcoat slickness and beading. For textured decks and heavy salt load, CleanMarine stays the first choice.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31\/10\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299347607887,"sku":"D1-KCX-77714-500ML-01","price":10.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-magicshampoo-pflegeshampoo__500ml_77714-500ML-01.png?v=1761908960"},{"product_id":"koch-chemie-the-finisher-automotive-tropicsnow-schaumshampoo","title":"THE FINISHER \"TropicSnow\" Foam Shampoo","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „TropicSnow“ — Foam Shampoo for Safe Pre-Wash\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does TropicSnow do? — The pH-neutral pre-wash foam loosens road film, encapsulates particles, builds a stable gliding film, and protects waxes, spray sealants \u0026amp; coatings. For foam cannons or pressure sprayers – with a smooth flow and even coverage.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER TropicSnow Foam Shampoo\u003c\/strong\u003e is your forgiving introduction to safe hand washing. The fine-pored, stable foam adheres thickly, pre-loosens static road film, and noticeably reduces friction during the contact wash. Wax, spray, and ceramic layers are preserved; paint, PPF, and glossy plastics are evenly wetted. Ideal as a pre-wash before WheelKing (rims), InsectOff (front), and the glide\/shine wash with MagicShampoo. This minimizes wash marring and starts every wash with a clean, well-lubricated surface – from roof to sills.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003epH-neutral \u0026amp; LSP-friendly:\u003c\/strong\u003e Gentle on waxes, spray sealants, and coatings; maintains gloss and beading instead of stripping them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable foam, high wetting power:\u003c\/strong\u003e Encapsulates dirt, softens it, and prevents dry spots – more time, less rush.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical logic:\u003c\/strong\u003e Perfect as a pre-wash before the two-bucket wash with MagicShampoo and the quick topping with JustPerfect or BodyGuard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFoam Shampoo – pH-Neutral Safety in Pre-Wash\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFoam shampoo\u003c\/strong\u003e like THE FINISHER TropicSnow Foam Shampoo works with mild surfactants and gliding additives that bind particles in micelles and remove them during rinsing. The stable film extends the dwell time without drying out and bridges temperature and humidity fluctuations. This allows you to start the contact wash with significantly less loose abrasion on the surface, which reduces the risk of micro-scratches and makes the subsequent hand wash noticeably easier.\u003c\/p\u003e\n\u003ch3\u003ePre-Wash – Dosage, Dwell Time \u0026amp; Procedure\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePre-wash\u003c\/strong\u003e means: cool surface, shade, pre-wet components. Mix THE FINISHER TropicSnow Foam Shampoo in the appropriate ratio, apply evenly, and let it work for 3–5 minutes. Do not let it dry; re-mist if necessary. Then rinse thoroughly and with pressure. The surface is now prepared for the two-bucket wash with a fresh mitt; the remaining gliding film supports safe movement over the paint.\u003c\/p\u003e\n\u003ch3\u003eCompatibility – Paint, PPF \u0026amp; Coatings under control\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e is at the core of the idea behind THE FINISHER TropicSnow Foam Shampoo: It protects existing LSPs on paint, film, and glossy plastics, making it suitable for any care plan. After rinsing, coatings show their typical beading, and wax and spray layers appear refreshed. Afterwards, you proceed with a contact wash using MagicShampoo; if you want to further enhance the gloss, finish with JustPerfect or provide hydrophobic durability with BodyGuard.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions about THE FINISHER × Koch-Chemie „TropicSnow“ — Foam Shampoo\u003c\/h2\u003e\n\u003ch4\u003eDoes TropicSnow strip existing sealants?\u003c\/h4\u003e\n\u003cp\u003eNo. It is designed to be pH-neutral and preserves waxes, spray sealants, and coatings. It loosens, encapsulates dirt, and rinses it off gently.\u003c\/p\u003e\n\u003ch4\u003eCan I use TropicSnow as my only shampoo?\u003c\/h4\u003e\n\u003cp\u003eYes, as a pre-wash. For the actual contact wash, we recommend MagicShampoo – it increases glide and visibly refreshes protection.\u003c\/p\u003e\n\u003ch4\u003eWhich devices work best?\u003c\/h4\u003e\n\u003cp\u003eA foam cannon on a high-pressure washer delivers dense, stable foam. With a pressure sprayer, you can control smaller areas or spot applications.\u003c\/p\u003e\n\u003ch4\u003eOn which surfaces is it suitable?\u003c\/h4\u003e\n\u003cp\u003ePaint, PPF\/wraps (glossy), painted plastics, and chrome\/high-gloss trim. Please test carefully on matte paints\/wraps, as smoothing additives can optically enhance them.\u003c\/p\u003e\n\u003ch4\u003eHow long should the foam dwell?\u003c\/h4\u003e\n\u003cp\u003e3–5 minutes in the shade. Do not let it dry; work shorter in sun or wind and re-mist if necessary. Then rinse thoroughly.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299375722831,"sku":"D1-KCX-77716-500ML-01","price":10.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-tropicsnow-schaumshampoo_500ml_77716-500ML-01.png?v=1761909033"},{"product_id":"koch-chemie-the-finisher-automotive-wheelking-felgenreiniger","title":"THE FINISHER \"WheelKing\" Wheel Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „WheelKing“ — wheel cleaner with safe reactive power\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat's WheelKing for? — The acid-free, reactive wheel cleaner reliably lifts baked-on brake dust and fallout, clings evenly as a gel, changes colour as it reacts so you can see it working, and rinses off streak-free – for painted and powder-coated steel and alloy wheels.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER WheelKing wheel cleaner\u003c\/strong\u003e is your go-to weapon against dark brake dust and metallic build-up. The reactive gel formula wraps complex designs right down into the barrel, chemically loosens particles and makes the reaction visible through that telltale colour change. That means less brushing, more control, and an even, clean finish on painted and powder-coated wheels – painted calipers included. In the THE FINISHER system, WheelKing comes after the pre-wash (TropicSnow) and before the contact wash (MagicShampoo); when you want final protection, BodyGuard takes care of it. Bottom line: less scrubbing, more result – safe, quick, repeatable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong on brake dust:\u003c\/strong\u003e reactive agents crack iron-rich deposits and dissolve fallout, and the gel texture clings for ages to complex geometries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGentle \u0026amp; controlled:\u003c\/strong\u003e acid-free, pH-balanced, with a clear colour-change indicator; suited to painted\/powder-coated steel and alloy wheels plus painted calipers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth workflow: \u003c\/strong\u003eslots in perfectly between TropicSnow (pre-wash) and MagicShampoo (hand wash); rinses off clean and preps the surface for protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eReactive wheel cleaner – technology \u0026amp; material protection\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003ereactive wheel cleaner\u003c\/strong\u003e like THE FINISHER WheelKing wheel cleaner works by bonding to the iron particles thrown off as brake dust and fallout. The gel structure keeps things sitting still so the active agents have time to loosen particles; the colour change shows you where the reaction is running. Because the formula is acid-free and pH-balanced, the job stays gentle on the material: clear coats, powder coatings and painted calipers keep their gloss and feel. On sensitive special surfaces – polished, bare, anodised – the rule is: test spot in a hidden area, short dwell time, rinse straight away. Hot wheels, direct sun and chemistry left to dry are off the table – that's how you keep the process safe.\u003c\/p\u003e\n\u003ch3\u003eUsing it on the car – dwell time, tools \u0026amp; sequence\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eapplication\u003c\/strong\u003e comes down to a few clean steps. Cool the wheels down and pre-wet them, then spray THE FINISHER WheelKing wheel cleaner on generously, working bottom to top. Let it work for 2–4 minutes, don't let it dry. Move a soft wheel brush over the spokes, barrel and edges; for lug holes and the valve area, detail brushes do the job. Then rinse with pressure until no more foamy streaks run off. Now comes the exterior wash with MagicShampoo; the mitt glides cleanly over the wheel you've already taken the load off. If you want more protection and easier cleaning next time, finish with BodyGuard once everything's dry – it makes the next wash noticeably easier.\u003c\/p\u003e\n\u003ch3\u003eResult \u0026amp; routine – winter grime, performance wheels \u0026amp; care plan\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine\u003c\/strong\u003e beats panic-cleaning: reach for THE FINISHER WheelKing wheel cleaner on every thorough wash, or at least every two or three washes, depending on how much brake dust you're dealing with. On hard-worked performance wheels or after winter drives, a second short pass with targeted brushing helps. Clean painted calipers at the same time, but keep it off any hot components right after a drive. After rinsing and the hand wash, dry with a separate towel to stop water spots. A light, hydrophobic topping step (BodyGuard) cuts down build-up a lot – brake dust then rinses off faster next time round.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „WheelKing“ — wheel cleaner\u003c\/h2\u003e\n\u003ch4\u003eIs WheelKing suitable for every type of wheel?\u003c\/h4\u003e\n\u003cp\u003eFor painted and powder-coated steel and alloy wheels yes, and for painted calipers too. On polished\/bare metals and anodised surfaces, test first, work quickly and rinse thoroughly straight away.\u003c\/p\u003e\n\u003ch4\u003eHow long should the cleaner dwell?\u003c\/h4\u003e\n\u003cp\u003e2–4 minutes in the shade. Don't let it dry; in warm weather work in shorter passes and re-mist if needed. The colour change shows you the reaction in progress.\u003c\/p\u003e\n\u003ch4\u003eDoes the product attack valves or TPMS?\u003c\/h4\u003e\n\u003cp\u003eUsed properly, no. Don't use it on hot components, and always rinse off completely after brushing – including the valve, nipple and sensor housing.\u003c\/p\u003e\n\u003ch4\u003eWhy do I need a shampoo on top of this?\u003c\/h4\u003e\n\u003cp\u003eWheelKing chemically loosens iron-rich grime. The hand wash with MagicShampoo afterwards removes road dirt and builds up lubricity and a care film – so the surface stays clean longer.\u003c\/p\u003e\n\u003ch4\u003eCan I use WheelKing without brushes?\u003c\/h4\u003e\n\u003cp\u003eYes, the chemistry works on its own. But a gentle mechanical assist with a wheel brush or detail brush clearly improves the result in corners, edges and bolt channels.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31\/10\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299398463823,"sku":"D1-KCX-77717-500ML-01","price":15.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-wheelking-felgenreiniger_500ml_77717-500ML-01.png?v=1761909250"},{"product_id":"koch-chemie-the-finisher-automotive-leatherlock-lederpflege","title":"THE FINISHER \"LeatherLock\" Leather Care","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"LeatherLock\" — leather care with a satin-matte OEM finish\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use LeatherLock for? — This leather care conditions coated smooth leather after cleaning, brings back colour depth, keeps the natural feel without that greasy sheen, and makes the surface easier to look after – ideal for seats, the steering wheel rim and door panels.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER LeatherLock leather care\u003c\/strong\u003e is the targeted care step for modern, coated vehicle leather. The fine polymer emulsion lays down evenly, feeds the material visually, cuts down dry-out and keeps that grippy-dry OEM feel. After cleaning with InsideUp or the stain-focused LeatherTexClean, LeatherLock gives you a calm, rich finish with no smearing and no cranked-up gloss – exactly right for contemporary interiors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatin-matte OEM finish\u003c\/strong\u003e: revives colour depth without greasy reflections; the surface stays dry and grippy for seat bolsters and touch areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy care \u0026amp; balanced:\u003c\/strong\u003e the thin-film emulsion conditions evenly and cuts visible dry-out, without clogging up the leather grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-clean: \u003c\/strong\u003eapply to cleaned leather; works hand in hand with InsideUp\/LeatherTexClean as prep and keeps the next interior clean noticeably easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eLeather care – technology, finish \u0026amp; understanding the material\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLeather care\u003c\/strong\u003e on coated smooth leather works when the care does its job in the top layer, not down in the pores. THE FINISHER LeatherLock leather care uses a finely balanced polymer emulsion that forms a thin, even film after a short flash-off. That film smooths the micro-roughness, freshens up the visual saturation and keeps the dry, slip-free feel of modern automotive leather. No grease layer, no gloss build-up: the result looks factory-fresh. The care isn't suited to open-pore aniline or nubuck\/suede – those lack the protective top coat our product is built for. The basis of any care stays clean prep: pull the day-to-day film off with InsideUp, lift pigment and grease stains with LeatherTexClean, and only then condition.\u003c\/p\u003e\n\u003ch3\u003eIn-car application – cleaning, applying, buffing off\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e runs controlled and thin. Get the leather dust-free and clean, then put a few squirts of THE FINISHER LeatherLock leather care onto a soft applicator pad or microfibre cloth. Spread it evenly in small sections, let it flash off for 1–2 minutes, then wipe back gently with a clean side of the cloth until the surface looks calm and streak-free. Seat bolsters, side supports and high-touch zones do better with two very thin passes than one heavy one. Go sparingly on the steering wheel rim to keep the grip; keep it off the pedals, and Alcantara is a no-go. Avoid direct sun and hot surfaces – the care should set, not dry on.\u003c\/p\u003e\n\u003ch3\u003eResult \u0026amp; routine – feel, colour depth, durability\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe result\u003c\/strong\u003e is a rich, satin-matte leather look that feels natural and picks up dirt more slowly. Day to day, wiping fingerprints and dust off with a slightly damp cloth is enough; deeper cleans go easier after the care, because grime grips less well. A sensible routine: clean the interior, treat the specific leather spots with LeatherTexClean, then lay LeatherLock down thin and wipe back. With normal use you re-apply every 6–10 weeks; high-mileage drivers shorten the intervals, show cars can go longer. That keeps the balance of colour depth, grip and easy care steady – with no layer build-up or greasy look.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie \"LeatherLock\" — leather care\u003c\/h2\u003e\n\u003ch4\u003eWhich types of leather is LeatherLock suitable for?\u003c\/h4\u003e\n\u003cp\u003eFor coated\/sealed automotive smooth leather. Not for aniline, nubuck or suede. Test in a hidden spot first and only apply to clean leather.\u003c\/p\u003e\n\u003ch4\u003eDoes the leather end up shiny after care?\u003c\/h4\u003e\n\u003cp\u003eNo. LeatherLock deliberately aims for a satin-matte, OEM-like finish with a dry, grippy feel – no greasy film.\u003c\/p\u003e\n\u003ch4\u003eHow often should I apply it?\u003c\/h4\u003e\n\u003cp\u003eDepending on use, every 6–10 weeks. Sooner on heavily used seat bolsters, less often on garage\/show cars.\u003c\/p\u003e\n\u003ch4\u003eCan LeatherLock \"repair\" cracks or wear?\u003c\/h4\u003e\n\u003cp\u003eNo. It cares for and stabilises the look, but doesn't fix structural damage. Cracks need professional restoration\/leather repair.\u003c\/p\u003e\n\u003ch4\u003eHow do I prep best?\u003c\/h4\u003e\n\u003cp\u003eFirst InsideUp for the day-to-day film, and LeatherTexClean for denim transfer or grease. Then lay LeatherLock down very thin and buff it off cleanly.\u003c\/p\u003e\n  \u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299438735695,"sku":"D1-KCX-77719-500ML-01","price":13.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-leatherlock-lederpflege_500ml_77719-500ML-01.png?v=1761909465"},{"product_id":"koch-chemie-the-finisher-automotive-texlock-textilversiegelung","title":"THE FINISHER \"TexLock\" fabric sealant","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie “TexLock” — fabric sealant against stains \u0026amp; re-soiling\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does TexLock do in the car? — The breathable fabric sealant impregnates seat covers, carpets and boot felt so they turn hydrophobic, cuts down re-soiling, makes stains easier to lift and keeps the original feel – invisible, breathable, ideal after a thorough interior clean.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER TexLock fabric sealant\u003c\/strong\u003e protects hard-worked automotive textiles for everyday use: liquids bead off, dirt struggles to grab hold, and the fibre stays grippy and breathable. The formula bonds into the fibre structure without a silicone film or that greasy sheen. Perfect after cleaning with InsideUp or spot-treating with LeatherTexClean – especially on seat faces, floor mats, carpet and boot felt. The result: more time to dab up spills, fewer tide marks, and follow-up care that's far easier.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydrophobic protection:\u003c\/strong\u003e liquids bead off and stains soak in more slowly; spot-on for everyday moments like coffee, soft drinks, wet clothes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInvisible \u0026amp; breathable:\u003c\/strong\u003e no “plastic feel”, the original look and grip stay put; the fibre can keep “breathing”.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for daily life: \u003c\/strong\u003emakes dust and dirt easier to lift, cuts tide marks and steadies your cleaning intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFabric sealant – how it works \u0026amp; bonds to the fibre\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003efabric sealant\u003c\/strong\u003e like THE FINISHER TexLock fabric sealant works through a fine-film, chemical bond to the fibre structure. The hydrophobic groups point outward, so water and water-based stains form beads instead of soaking in. Because the film is ultra-thin, the fibre stays flexible and breathable – the feel doesn't change, the look stays factory-fresh. That helps against everyday triggers like coffee, rainwater, salt marks from winter damp or wet sports kit on the seat.\u003c\/p\u003e\n\u003ch3\u003eApplying it on seats, carpet \u0026amp; boot\u003c\/h3\u003e\n\u003cp\u003eYou get the best \u003cstrong\u003eapplication\u003c\/strong\u003e when the base is clean and dry. After prepping with InsideUp or spot-cleaning with LeatherTexClean, let the textiles dry fully, then mist THE FINISHER TexLock fabric sealant on evenly in a cross pattern, lift the fibres with a soft brush and mist a thin coat again. Don't soak it – feather the edges out cleanly. Let it dry 12–24 hours and only put it back to use after that. Keep it off seat belts, headliner and airbag zones; on Alcantara go easy on the dose and always run a test patch first.\u003c\/p\u003e\n\u003ch3\u003eDurability, upkeep \u0026amp; compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDurability\u003c\/strong\u003e comes down to use and cleaning. Floor mats and seat bolsters take more of a beating than boot felt – there you might build up two thin coats. For upkeep, clean the textiles gently, let them dry fully and lay down a thin refresh when the beading starts to fade. THE FINISHER TexLock fabric sealant is invisible, plays nicely with common interior cleaners and won't upset sensors or seat heating. Don't seal leather, vinyl or plastics, though – LeatherLock or InsideCare\/VinylGuard are there for those.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie “TexLock” — fabric sealant\u003c\/h2\u003e\n\u003ch4\u003eWhich surfaces do I use TexLock on?\u003c\/h4\u003e\n\u003cp\u003eOn automotive textiles like seat covers, floor mats, carpets and boot felt. Not for leather, vinyl, plastics, headliner or seat belts.\u003c\/p\u003e\n\u003ch4\u003eDoes TexLock change the feel?\u003c\/h4\u003e\n\u003cp\u003eNo. The sealant stays ultra-thin and breathable – grip and look stay factory-fresh, with no rustly or “plasticky” feel.\u003c\/p\u003e\n\u003ch4\u003eHow long does TexLock need to dry?\u003c\/h4\u003e\n\u003cp\u003eDepending on temperature, 12–24 hours. Don't use or soak it in that time. You only get full beading once it's fully dry.\u003c\/p\u003e\n\u003ch4\u003eDoes TexLock help against salt and winter marks?\u003c\/h4\u003e\n\u003cp\u003eIt slows the soak-in and makes low-stain cleaning easier. Marks can still form, but they come off more easily and come back less often.\u003c\/p\u003e\n\u003ch4\u003eHow often should I refresh it?\u003c\/h4\u003e\n\u003cp\u003eEvery 3–6 months depending on wear. High-use zones (floor mats, driver's seat) sooner, boot felt later.\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299495424335,"sku":"D1-KCX-77722-500ML-01","price":28.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-texlock-textilversiegelung_500ml_77722-500ML-01.png?v=1761909668"},{"product_id":"koch-chemie-the-finisher-automotive-justperfect-quickdetailer","title":"THE FINISHER \"JustPerfect\" Quick Detailer","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „JustPerfect“ — quick detailer for gloss \u0026amp; slick in minutes\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use JustPerfect for? — The quick detailer pulls off dust, light water spots and fingerprints, boosts slickness and gloss, brings beading back to life and works as a drying-friendly slip and finish layer after the wash – fast, streak-free.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER JustPerfect quick detailer\u003c\/strong\u003e is your fast gloss and slip boost for everyday car care. It clears light marks after the wash, lifts surface slickness noticeably and gets water beading cleanly again. Perfect as a drying aid on wet paint or as a show finish on a dry car – plays nicely with wax, spray sealant and ceramic coating. So you get a calm, deep look back in minutes, without running the whole care routine.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant effect: \u003c\/strong\u003eremoves light water spots\/fingerprints, lifts gloss and slickness visibly – streak-free, even on dark paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection-friendly:\u003c\/strong\u003e brings beading back and works with wax, sealant \u0026amp; coating instead of weakening them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile:\u003c\/strong\u003e as a drying aid after the wash or a quick finish in between – with a noticeable slip film.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eQuick detailer – gloss, slip film \u0026amp; light cleaning\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003equick detailer\u003c\/strong\u003e like JustPerfect pairs fine cleaners with high-slip polymers. Light deposits, dust and water spots get picked up safely, while a thin care film smooths the microstructure. That cuts friction while you wipe and stops streaks, especially on touchy, dark paint. The slip film it leaves acts like a gentle „topper“: it visually stabilises the protection you already have, without leaving a greasy layer. One thing to keep in mind: it doesn’t replace a pre-wash or hand wash – it perfects them.\u003c\/p\u003e\n\u003ch3\u003eEveryday car-care use – drying aid, dusting off, show finish\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive\u003c\/strong\u003e day-to-day: work in the shade on a cool surface. As a drying aid, mist JustPerfect lightly onto the wet panel or into the drying towel, pull the water off and buff with a fresh microfibre side. On dry paint, grab two towels: one to spread, one to buff out – panel by panel, no pressure. Fingerprints and light water spots disappear, and the look turns deep and calm. After TropicSnow and MagicShampoo, JustPerfect is the quick full stop.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; limits – paint, PPF, gloss plastics\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e: safe on paint, PPF\/wrapped high-gloss surfaces and smooth painted plastics. It plays nicely with waxes, spray sealants and coatings – it freshens up the look and feel instead of stripping layers. Limits: not on matte paint\/wraps (it can darken them), not on glass or displays (streak risk; use ClearView or DisplayExpert for those). With heavier dirt the route stays classic: pre-wash, hand wash, then a quick detailer for the finish.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „JustPerfect“ — quick detailer\u003c\/h2\u003e\n\u003ch4\u003eDoes JustPerfect replace a wash?\u003c\/h4\u003e\n\u003cp\u003eNo. It refines and corrects light marks after the wash or in between. With visible road film, pre-wash and wash first.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on ceramic coatings?\u003c\/h4\u003e\n\u003cp\u003eYes. It brings back slickness, gloss and beading without attacking the coating – a perfect care companion between washes.\u003c\/p\u003e\n\u003ch4\u003eHow do I use it as a drying aid?\u003c\/h4\u003e\n\u003cp\u003eLightly wet the panel or drying towel, pull the water off, gently buff out with a second towel. That cuts friction and stops water spots.\u003c\/p\u003e\n\u003ch4\u003eWhy do I sometimes get streaks?\u003c\/h4\u003e\n\u003cp\u003eToo much product, a surface that’s too warm, or saturated towels. Fix: spray less, work in the shade, use a fresh microfibre side for the finish.\u003c\/p\u003e\n\u003ch4\u003eIs it OK for glass or the interior?\u003c\/h4\u003e\n\u003cp\u003eNo. On glass it can smear, and inside it leaves film streaks. For glass use ClearView, for displays DisplayExpert, for plastics InsideCare.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299540283727,"sku":"D1-KCX-77721-500ML-01","price":12.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-insectoff-insektenentferner_500ml_77723-500ML-01.png?v=1761910151"},{"product_id":"koch-chemie-the-finisher-automotive-insectoff-insektenentferner","title":"THE FINISHER \"InsectOff\" Bug Remover","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „InsectOff“ — bug remover for a safe front-end pre-wash\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eHow does InsectOff get bug splatter off? — The pH-balanced pre-cleaner formula breaks down protein- and sugar-heavy residue in a controlled way, stops it from drying on, cuts the friction during your contact pass and preps paint, grille, mirror caps and windscreen perfectly for the hand wash.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER InsectOff bug remover\u003c\/strong\u003e is your fast, paint-safe first hit against summer bug films that lodge in pores and edges as a stubborn protein\/sugar layer. Wetting additives carry the active deep into honeycomb grilles and mirror seams, soften the bonded layer and rinse it off without scratching. On painted parts, PPF\/wraps (glossy) and the windscreen it works in a controlled, LSP-friendly way. In the workflow it goes on before TropicSnow (foam pre-wash) and before the contact wash with MagicShampoo – so you start into a slick, low-scratch wash instead of grinding over grit on the first pass. \u003cstrong\u003eTHE FINISHER InsectOff bug remover\u003c\/strong\u003e saves you time, hassle and polishing down the line.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast \u0026amp; safe:\u003c\/strong\u003e Reactive protein dissolvers soften bug films, and the gel\/wetting phase clings on vertical panels – less scrubbing, less risk of micro-marring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLSP-friendly:\u003c\/strong\u003e pH-balanced, built for modern paints, clearcoats and PPF; holds onto wax, spray sealant \u0026amp; coating better than harsh alternatives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect start: \u003c\/strong\u003eThe ideal prep step before TropicSnow and the MagicShampoo hand wash; ClearView then leaves the glass dead streak-free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eBug remover – protein dissolvers, wetting \u0026amp; pH balance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBug removers\u003c\/strong\u003e work by chemically breaking up the protein- and sugar-heavy matrix of the residue. Summer heat and airflow „bake“ that matrix on, which is why plain water or shampoo tends to smear on the first pass. THE FINISHER InsectOff bug remover pairs a pH-balanced active base with high wetting: the film sits quietly on the front end, creeps into gaps and under edges, softens the bonded layer and makes the grit rinsable. That drops the pressure you need when wiping, and you steer clear of scratch marks that would only come out later with polish. On delicate trim you work quick and in the shade; don't let it dry on, because dried-on chemistry works against you.\u003c\/p\u003e\n\u003ch3\u003ePre-wash on the car – dwell time, steps \u0026amp; safety\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePre-wash\u003c\/strong\u003e means: cool surface, shade, wet the parts down first. Spray THE FINISHER InsectOff bug remover generously onto the front end, mirrors, lower edge of the windscreen and number plate, let it work for 2–4 minutes and keep the area lightly damp if needed. Don't let it dry on. Rinse off with a strong jet of water; optionally lay TropicSnow over the top afterwards as a full foam blanket to lock up leftover dirt and take load off the contact wash. Only then comes the two-bucket hand wash with MagicShampoo. On glass you don't mess around: after rinsing, lock in perfect clarity with ClearView. Glossy PPF\/wraps are fine; test matte films in a hidden spot, since wetting additives can lightly „light up“ the look.\u003c\/p\u003e\n\u003ch3\u003eResult \u0026amp; routine – long hauls, summer use \u0026amp; paint protection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine\u003c\/strong\u003e beats panic: reach for THE FINISHER InsectOff bug remover after long hauls or whenever the front end is visibly speckled. The fresher the residue, the easier it lifts. For stubborn shadows („etching“) a gentle correction with ShineSpeedPolish helps; deeper marks you tackle panel by panel with FineCut. After the wash JustPerfect gives the quick gloss-and-slip kick; if you want to bump up the beading, lay down a thin spray sealant with BodyGuard. That keeps the protection stable, and the next clean goes way quicker.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ on THE FINISHER × Koch-Chemie „InsectOff“ — bug remover\u003c\/h2\u003e\n\u003ch4\u003eDoes InsectOff attack wax, spray sealants or coatings?\u003c\/h4\u003e\n\u003cp\u003eThe pH-balanced formula is LSP-friendly. With very long dwell times or hot paint, effect and removal can climb – so work in the shade and don't let it dry on; refresh the protection afterwards with JustPerfect\/BodyGuard.\u003c\/p\u003e\n\u003ch4\u003eHow long can InsectOff dwell?\u003c\/h4\u003e\n\u003cp\u003e2–4 minutes in the shade. In wind or heat go shorter and re-mist if needed. Never let it dry on – always rinse thoroughly after.\u003c\/p\u003e\n\u003ch4\u003eCan I use it on PPF, chrome and plastics?\u003c\/h4\u003e\n\u003cp\u003eYes, on glossy PPF, painted plastics, clearcoat and chromed parts. Test matte films in a hidden spot first, keep it off bare metals and don't use the product on hot surfaces.\u003c\/p\u003e\n\u003ch4\u003eWhat if pale shadows stay after the wash?\u003c\/h4\u003e\n\u003cp\u003eThose are often etching rings from biofilm that dried on for too long. A light correction with ShineSpeedPolish usually does it; for heavier marks, work spot by spot with FineCut.\u003c\/p\u003e\n\u003ch4\u003eIs InsectOff suitable for glass too?\u003c\/h4\u003e\n\u003cp\u003eYes, as a pre-cleaner. After rinsing you finish with ClearView for streak-free glass and a clean wiper sweep. Give the wiper blades a quick wipe afterwards.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299608244559,"sku":"D1-KCX-77723-500ML-01","price":10.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-automotive-insectoff-insektenentferner_77723-500ml.png?v=1764167183"},{"product_id":"koch-chemie-the-finisher-automotive-shinespeedpolish-waxpolitur","title":"THE FINISHER \"ShineSpeedPolish\" Wax Polish","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „ShineSpeedPolish“ — Wax Polish for Deep Shine in One Step\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does ShineSpeedPolish do? — This wax polish cleans, polishes, and protects in one go: It removes fine hazing, visually conceals micro-scratches, creates rich deep gloss, and leaves behind a smooth, water-repellent wax film – ideal as a quick finish after washing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER ShineSpeedPolish Wax Polish\u003c\/strong\u003e is your efficient shine booster for well-maintained, slightly scratched paints. The polish removes fine hazing, visually fills micro-defects, and finally applies a protective wax layer. Perfect if you want a high-quality finish quickly after a hand wash – without a full correction. In the system, it positions itself between gentle gloss care and genuine defect correction: For more cut, use RoughCut\/FineCut or a one-step alternative; BodyGuard or JustPerfect are suitable as a topping.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-in-1 Performance: \u003c\/strong\u003elight defect removal, visible deep gloss, and protective wax film in one step – time-saving, reproducible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Finish: \u003c\/strong\u003every good buffability, calm paint finish without hazing; ideal for dark colors and daily drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatible:\u003c\/strong\u003e harmonizes with TropicSnow\/MagicShampoo in preparation and can be topped with BodyGuard\/JustPerfect if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWax Polish – Gloss, Filling Effect \u0026amp; Protection in One\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWax polish\u003c\/strong\u003e means: mild abrasives equalize fine wash marks, while nourishing components smooth the microstructure and a wax-based protective film cures. THE FINISHER ShineSpeedPolish Wax Polish delivers exactly this trio in a stable, easy-to-apply step. The gloss appears deep and \"calm\" because the filling effect visually reduces the stress of micro-scratches. The resulting wax film supports beading\/sheeting and facilitates the next cleaning – without a greasy look. Do not use on matte paints\/wraps, as the desired gloss character will be enhanced.\u003c\/p\u003e\n\u003ch3\u003eFinish Polish – Application, Pad Selection \u0026amp; Machine\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFinish polish\u003c\/strong\u003e works best on cool, clean paint. After pre-wash (TropicSnow) and hand wash (MagicShampoo), work panel by panel: apply a few drops to a soft to medium foam pad, move with an eccentric polisher in a cross-hatch pattern until the film becomes clear, then buff off residues completely. Start gently on sensitive clear coats; more \"bite\" can be achieved by using a harder pad or slowly increasing machine parameters. Treat edges and fresh paintwork cautiously, always create a test spot. Avoid glass, plastics, and rubber.\u003c\/p\u003e\n\u003ch3\u003eOne-Step Result – Durability, Compatibility \u0026amp; Limitations\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOne-step result\u003c\/strong\u003e means: visible improvement in a short time with everyday protection. The wax component lasts for weeks depending on use, can be easily refreshed with BodyGuard after the next wash, or quickly \"popped\" with JustPerfect. Existing waxes\/sealants are not aggressively removed but visually supported. Limitations: For significant scratches, holograms, or oxidation, you will need the correction stages RoughCut\/FineCut or a dedicated one-step polish. Do not polish on PPF and matte surfaces.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions about THE FINISHER × Koch-Chemie „ShineSpeedPolish“ — Wax Polish\u003c\/h2\u003e\n\u003ch4\u003eDoes ShineSpeedPolish replace a complete detailing?\u003c\/h4\u003e\n\u003cp\u003eNo. It is ideal for quick enhancement and protection. For visible defects or holograms, use RoughCut\/FineCut or a stronger one-step polish beforehand.\u003c\/p\u003e\n\u003ch4\u003eHow do I best prepare the paint?\u003c\/h4\u003e\n\u003cp\u003ePre-clean with TropicSnow, hand wash with MagicShampoo, dry paint-adjacent areas. Then polish and fully buff out residues. Mask off or avoid plastic\/rubber parts.\u003c\/p\u003e\n\u003ch4\u003eCan I add another product afterwards?\u003c\/h4\u003e\n\u003cp\u003eYes. For more hydrophobicity and a wet look after the next wash, spray BodyGuard or use JustPerfect in between. Both complement the wax polish effectively.\u003c\/p\u003e\n\u003ch4\u003eHow often should I apply it?\u003c\/h4\u003e\n\u003cp\u003eAs often as you want to refresh the shine. For daily drivers, every few months is sufficient; in between, maintenance washes and optional toppings keep the appearance stable.\u003c\/p\u003e\n\u003ch4\u003eSuitable for all paints?\u003c\/h4\u003e\n\u003cp\u003eYes, for conventional, glossy clear coats. Not for matte paints\/wraps and not for PPF. Always work in the shade and avoid hot surfaces.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"250ml","offer_id":56300004802895,"sku":"D1-KCX-77711-250ML-01","price":10.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-shinespeedpolish-waxpolitur_250ml_77711-250ML-01.png?v=1761911576"},{"product_id":"koch-chemie-the-finisher-automotive-powerspeedpolish-onesteppolitur","title":"THE FINISHER \"PowerSpeedPolish\" OneStepPolish","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „PowerSpeedPolish“ — one-step polish for real correction \u0026amp; high gloss\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhen do I reach for PowerSpeedPolish? — When you want to visibly knock back wash marks, hazing and lighter defects in a single pass, and land a high-gloss, hologram-free finish at the same time. The ideal one-step for daily drivers after a proper pre-wash and dry.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER PowerSpeedPolish one-step polish\u003c\/strong\u003e pairs modern cut with a safe finish in a single step. Micro-abrasives cut defects back in a controlled way, fine-oil carriers level out the paint and wipe off easily – no dust storms, no sticky residue. Perfect for cars with typical wash marks, when time is tight but the result still needs to look „detailed“. In the workflow, PowerSpeedPolish sits alongside the pure finish wax polish (ShineSpeedPolish). After that you top it off with JustPerfect (hydrophobics) depending on the look you're after, or leave the pure, crisp finish as it is.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong one-step:\u003c\/strong\u003e noticeable defect reduction + a high-gloss, calm paint surface in one pass – ideal for daily drivers and sale prep.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe \u0026amp; efficient: \u003c\/strong\u003elong working time, low-dust use, clean wipe-off; keeps hologram risk down on common clear coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-friendly\u003c\/strong\u003e: slots in behind TropicSnow \u0026amp; MagicShampoo; you can „pop“ it with JustPerfect whenever you like.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eOne-step polish – cut, gloss \u0026amp; finish in balance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOne-step polish\u003c\/strong\u003e means cutting power and finishing behaviour are balanced so you get a visible update after a single pass. THE FINISHER PowerSpeedPolish one-step polish runs finely tuned micro-abrasives that bite early and finish very cleanly as they break down. That's how car-wash haze, light swirls and grey hazing visibly disappear, without the finish going „milky“. The low-oil matrix wipes off fully and gives a clear, crisp reflection – the ideal base to lay down protection afterwards or show off the pure finish. On soft paints the polish stays gentle; on medium-hard paints it delivers the best balance of defect removal and brilliance.\u003c\/p\u003e\n\u003ch3\u003eDA polishing – pad choice, pressure \u0026amp; crosshatch for repeatable results\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDA polishing\u003c\/strong\u003e brings out the strengths of THE FINISHER PowerSpeedPolish one-step polish: work in the shade, cool surface, clean pads. Start with a medium-hard foam pad; step up to a firmer pad if the defects are heavier, or drop back to a soft finishing pad on delicate paints. Set 3–4 pea-sized drops, spread on a low speed, then polish in an even crosshatch with moderate pressure until the film goes clear and thin. At the end, ease off pressure and stroke speed slightly to pull that last touch „to gloss“. Take edges, corners and fresh paint gently; masking off sensitive plastics saves you rework. Wipe residue off completely with a fresh, dense-nap microfibre – and there's your clean one-step result.\u003c\/p\u003e\n\u003ch3\u003eHolograms, paint hardness \u0026amp; limits – when to top up, when to split\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHolograms\u003c\/strong\u003e are rare with the right pad and a DA, but they can show on extremely soft or gummy clear coats. Then a quick „jeweling“ pass with a soft pad and minimal product sorts it out. Very hard paints or deeper defects sometimes need more bite: here it pays to run a first, quick correction set with RoughCut, followed by a fast refining pass with PowerSpeedPolish. For pure gloss refresh with no real cut, ShineSpeedPolish is enough. Keep it off matte paint\/PPF – a polish would gloss up the matte level. After the one-step, your goal decides: maximum everyday protection with a sealant straight after wiping down, show finish, or a quick care refresh in between with JustPerfect after the next wash.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „PowerSpeedPolish“ — one-step polish\u003c\/h2\u003e\n\u003ch4\u003eDoes PowerSpeedPolish replace a multi-stage correction?\u003c\/h4\u003e\n\u003cp\u003eFor a lot of daily drivers, yes. But deep scratches, heavy holograms or oxidation still need prep work with RoughCut\/FineCut. PowerSpeedPolish is the strong middle ground between correction and finish.\u003c\/p\u003e\n\u003ch4\u003eWhich machine do I use?\u003c\/h4\u003e\n\u003cp\u003eA DA polisher gives the best, hologram-free finish. Only work rotaries if you're experienced, and always „relieve“ with a finishing pass.\u003c\/p\u003e\n\u003ch4\u003eDoes the polish dust?\u003c\/h4\u003e\n\u003cp\u003eLow-dust with fresh pads, a moderate amount of product and realistic strokes. Too much product, overloaded pads or heat feed the dust – blow out\/swap pads regularly.\u003c\/p\u003e\n\u003ch4\u003eDoes it leave protection behind?\u003c\/h4\u003e\n\u003cp\u003eIt's primarily a correction\/finish polish. For durable everyday protection we recommend BodyGuard straight after. For quick gloss between washes: JustPerfect.\u003c\/p\u003e\n\u003ch4\u003eWhich surfaces should I avoid?\u003c\/h4\u003e\n\u003cp\u003eMatte paints\/wraps, textured plastics, PPF with a matte surface. Treat edges, fresh paint and sensitive zones carefully, keep it off glass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31\/10\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"250ml","offer_id":56300095865167,"sku":"D1-KCX-77715-250ML-01","price":19.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-powerspeedpolish-onesteppolitur_250ml_77715-250ML-01.png?v=1761911764"},{"product_id":"koch-chemie-the-finisher-automotive-displayexpert-displayreiniger","title":"THE FINISHER \"DisplayExpert\" Screen Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „DisplayExpert“ — screen cleaner for streak-free displays\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat is DisplayExpert ideal for? — This dedicated screen cleaner cleans touchscreens, instrument clusters and piano-black inlays with barely any residue, lifts off fingerprints and dust without smearing, and protects the sensitive coated surface – perfect for the modern cockpit full of glass and piano-black panels.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER DisplayExpert screen cleaner\u003c\/strong\u003e is the safe pick for infotainment, digital dials, glass cover lenses and high-gloss interior trim. The mild, low-residue formula lifts finger grease and dust without smearing the surface or hazing it over. The touch stays precise, the image stays crisp, the feel stays dry – no risky glass-cleaner experiments in the cockpit. As a fixed part of the system, DisplayExpert keeps sensitive screens clearly separate from plastic and leather care: you clean interior surfaces with InsideUp and look after them with InsideCare\/LeatherLock – the screens stay the job of the screen cleaner.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreak-free \u0026amp; clear: \u003c\/strong\u003eLifts fingerprints and light water spots without streaks or a smear film – for crisp contrast and calm blacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating-friendly:\u003c\/strong\u003e Mild, pH-balanced formula for delicate touch surfaces and piano black – no „biting in“, no matte clouding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe routine: \u003c\/strong\u003eYou work it through the cloth, keep the moisture controlled and let it flash off fast – minimising risk at edges, speaker perforations and button seams.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eTouchscreen cleaner – streak-free \u0026amp; coating-friendly\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003etouchscreen cleaner\u003c\/strong\u003e like THE FINISHER DisplayExpert screen cleaner works with a finely balanced active base that lifts skin grease and comes off completely as you wipe. No film stays behind to push reflections or drag wipe marks around. At the same time the mild formula respects the sensitive anti-glare\/anti-fingerprint coatings on modern displays as well as high-gloss piano-black inlays. The result is clear, crisp displays, a dry feel and a surface that doesn't re-grease faster just because you cleaned it.\u003c\/p\u003e\n\u003ch3\u003eUse in the cockpit – microfibre cloth, dosing \u0026amp; safety\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUse in the cockpit\u003c\/strong\u003e means: don't spray onto the screen, spray onto a clean, tight microfibre cloth. Wipe panel by panel, no pressure, and work the edges and sensor areas with the folded cloth edge. For heavier fingerprints, let it dwell briefly then wipe dry with the fresh side of the cloth. Avoid over-wetting and any contact with open-pore speaker grilles; keep glass cleaner and all-purpose cleaner away from screens, as they can encourage streaks and matte clouds. Neighbouring plastics stay the job of InsideUp – clear product separation gives you repeatable results.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; limits – piano black, glass \u0026amp; nav displays\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e covers touchscreens, glass covers, digital clusters, piano-black and high-gloss trim. THE FINISHER DisplayExpert screen cleaner also handles navigation and head-unit displays in the car with ease. Limits: not meant for matte\/textured soft-touch surfaces or leather – use InsideUp\/LeatherTexClean there, then look after them with InsideCare or LeatherLock. On real glass on the outside of the car, ClearView stays the pick; DisplayExpert is built purely for the cockpit, where residue-free clarity and coating care are what count.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „DisplayExpert“ — screen cleaner\u003c\/h2\u003e\n\u003ch4\u003eCan I spray straight onto the screen?\u003c\/h4\u003e\n\u003cp\u003eBetter not. Always spray into the cloth and work panel by panel. That keeps moisture out of seams, off sensor edges and from under glass edges.\u003c\/p\u003e\n\u003ch4\u003eDoes DisplayExpert work on piano black?\u003c\/h4\u003e\n\u003cp\u003eYes. It lifts fingerprints streak-free and leaves a dry, calm surface – no streaks or smear film.\u003c\/p\u003e\n\u003ch4\u003eCan I clean the steering wheel or plastics with it too?\u003c\/h4\u003e\n\u003cp\u003eNo. For plastic\/leather\/textile, InsideUp or LeatherTexClean is the one to use. DisplayExpert stays purely for screens and high-gloss trim.\u003c\/p\u003e\n\u003ch4\u003eDoes the cleaner leave a film?\u003c\/h4\u003e\n\u003cp\u003eNo, the low-residue formula flashes off clear. If streaks stay, you usually had too much product in play – wipe dry with the fresh side of the cloth.\u003c\/p\u003e\n\u003ch4\u003eHow often should I clean?\u003c\/h4\u003e\n\u003cp\u003eAs needed. A few sprays into the cloth are enough; frequent, gentle cleaning beats rare, wet „scrubbing“.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"100ml","offer_id":56300149506383,"sku":"D1-KCX-77718-100ML-01","price":3.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-automotive-displayexpert-displayreiniger_77718-100ml.png?v=1764167362"},{"product_id":"koch-chemie-the-finisher-marine-seayou-glasreiniger","title":"THE FINISHER \"SeaYou\" Glass Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie “SeaYou” — Glass cleaner for a clear view on board\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhy run SeaYou on the boat? — This marine glass cleaner lifts salt film, spray mist and fingerprints streak-free, sheets off in a controlled way and stays gentle on real glass, polycarbonate and acrylic windows – for a clear view in the cockpit, on deck and down in the cabin.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER SeaYou glass cleaner\u003c\/strong\u003e is the clear answer for the surfaces you look through at sea: it removes salt and spray film, water spots and sunscreen smears fast and streak-free. The mildly balanced formula suits glass boat windows just as well as polycarbonate\/acrylic (e.g. sprayhood, hardtop and cabin windows) and leaves a calm, low-glare finish. Perfect after an exterior wash with CleanMarine or as a quick step in the marina – for confident navigation and a clean cockpit view.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine performance:\u003c\/strong\u003e Lifts salt and spray film streak-free, cuts glare and keeps the wiper sweep clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGentle on materials:\u003c\/strong\u003e Built for real glass, polycarbonate and acrylic; controlled flash-off with no streaks or smeary haze.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple \u0026amp; safe: \u003c\/strong\u003eLoosen it briefly, wipe off, buff dry – ideal for the cockpit, deck windows and cabin glazing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eMarine glass cleaner – salt film, spray \u0026amp; sunscreen under control\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMarine glass cleaners\u003c\/strong\u003e have to shift more than everyday dust: salt crystallises, holds moisture and bends the light; spray carries organic residue, and sunscreen leaves smeary fingerprints. THE FINISHER SeaYou glass cleaner goes straight at this: wetting agents lay the actives down evenly, loosen the layer in a controlled way and wipe it off with no rainbow film. The surface stays clear, edges look crisp and reflections read less busy – which matters in backlight or on a night run. Because SeaYou flashes off with barely any residue, it works on bigger panes too, without you constantly having to “chase it with a second pass”.\u003c\/p\u003e\n\u003ch3\u003eUsing it on board – cockpit, hardtop \u0026amp; cabin\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e couldn't be simpler: work in the shade, keep off hot surfaces. Spray THE FINISHER SeaYou glass cleaner onto a clean, tightly woven microfibre cloth (not straight onto edges or seals), wipe the surface in straight passes and buff dry with a fresh side of the cloth. On stubborn water spots, let it dwell for a moment; on polycarbonate\/acrylic, work with minimal pressure and in “straight strokes” to avoid fine wiper trails. Give the wiper blades a quick clean too – that keeps the wiper sweep smooth. After a route wash with CleanMarine, SeaYou is the fast visibility check before you cast off; for exterior paint and deck, CleanMarine, BodyGuard \u0026amp; Co. stay on duty.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; limits – glass, polycarbonate, acrylic\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e covers toughened glass, polycarbonate (e.g. Makrolon) and acrylic\/Plexiglas in the cockpit and cabin. THE FINISHER SeaYou glass cleaner flashes off clear, with no tacky residue. Avoid over-wetting seals and instruments, work panel by panel and keep your cloths clean – don't let salt and sand “come along for the ride”. It isn't meant as a limescale remover for old, baked-on water spots; shadows like that may need a gentle, material-safe polish. For automotive glass, our line has the dedicated ClearView – SeaYou stays the specialist for the boat.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie “SeaYou” — glass cleaner\u003c\/h2\u003e\n\u003ch4\u003eIs SeaYou suitable for plastic windows?\u003c\/h4\u003e\n\u003cp\u003eYes, for polycarbonate and acrylic on board. Work with a clean cloth, light pressure and straight strokes so you don't leave fine wiper trails.\u003c\/p\u003e\n\u003ch4\u003eDoes SeaYou really lift salt haze streak-free?\u003c\/h4\u003e\n\u003cp\u003eYes, the film loosens in a controlled way and flashes off with barely any residue. What matters is clean, salt-free cloths and working in the shade.\u003c\/p\u003e\n\u003ch4\u003eCan I spray straight onto the pane?\u003c\/h4\u003e\n\u003cp\u003eIn the cockpit, better to spray onto the cloth to avoid over-wetting edges and instruments. Out on deck in still air, spraying directly is fine.\u003c\/p\u003e\n\u003ch4\u003eDoes SeaYou help with older water spots?\u003c\/h4\u003e\n\u003cp\u003eLight spots, yes. Baked-on limescale rings may need a careful, material-safe polish. Always test on a hidden spot first.\u003c\/p\u003e\n\u003ch4\u003eQuick to use in the marina too?\u003c\/h4\u003e\n\u003cp\u003eAbsolutely. A few spritzes onto the cloth, wipe in passes, buff dry – done. Ideal after casting off or before a night run.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56300924272975,"sku":"D1-KCX-77106-500ML-01","price":13.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77106-500ML-01_1.png?v=1778249511"},{"product_id":"koch-chemie-the-finisher-marine-vinyltexclean-vinyl-textilreiniger","title":"THE FINISHER \"VinylTexClean\" Vinyl\/Textile Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „VinylTexClean“ — Vinyl\/Textile Cleaner for Cockpit, Bench \u0026amp; Cabin\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat makes VinylTexClean ideal on board? — The vinyl\/textile cleaner pulls salt film, sunscreen and everyday residue off in a controlled way, dries streak-free and keeps the grippy feel of marine vinyl and hard-wearing fabrics. Perfect as the prep step before VinylGuard or TexLock\/CoverGuard.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER VinylTexClean vinyl\/textile cleaner\u003c\/strong\u003e is the on-target cleaner for marine vinyl upholstery, console trim and hard-used fabric areas in cockpit and cabin. The pH-balanced, fine-foaming formula lifts sunscreen, salt and drink residue safely, without drying out the surface or leaving it smeary. The result: clean, grippy material with a factory-fresh look – perfectly set up for the care and protection that follow.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVinyl \u0026amp; fabric handled: \u003c\/strong\u003eCuts through sunscreen and salt film plus everyday stains, dries down calmly and keeps the natural grip of seats and trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreak-free \u0026amp; controlled:\u003c\/strong\u003e Fine foam for precise work without over-wetting; ideal on upholstery, trim and carpet zones in cabin and cockpit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong in the system:\u003c\/strong\u003e The perfect base for \u003cem\u003eVinylGuard\u003c\/em\u003e (vinyl care) and \u003cem\u003eTexLock\/CoverGuard\u003c\/em\u003e (fabric protection) – and it makes future cleans noticeably easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVinyl\/textile cleaner – lift salt, lotion \u0026amp; everyday grime safely\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003evinyl\/textile cleaner\u003c\/strong\u003e like THE FINISHER VinylTexClean works with mild surfactants and controlled foam: residue gets bound into micelles while the surface stays cool and grippy. On marine vinyl you lift sunscreen film, sweat and salt haze without a greasy shine; on tough fabrics you pull stains without over-soaking the fibres. The product flashes off residue-free so the care and protection products that follow can grab evenly – for a calm, clean cockpit look.\u003c\/p\u003e\n\u003ch3\u003eUsing it on board – dose, dwell, wipe clean\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use it\u003c\/strong\u003e: Work in the shade with the surfaces cool. Put the product on a microfibre cloth, or for heavier soiling spray it sparingly onto the area, let it dwell briefly and work it with a soft brush or cloth. Wipe off straight away with a clean side of the cloth, go over it with a slightly damp fibre if needed and pull it dry. Avoid over-wetting so you don't get streaks. Plastic windows (polycarbonate\/acrylic) belong to „SeaYou“ – don't clean those with this.\u003c\/p\u003e\n\u003ch3\u003eFinish \u0026amp; system – prepping for care and protection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFinish \u0026amp; system\u003c\/strong\u003e: After cleaning, the surface stays grippy-clean, not greasy. Then condition the vinyl areas in the cockpit with „VinylGuard“ for a rich, non-smeary look. Lock down heavily used fabric zones (seat surfaces, carpet runners, berth entry and exit) with „TexLock“ or „CoverGuard“ once fully dry. That cuts down re-soiling, and future washes go noticeably faster.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „VinylTexClean“ — Vinyl\/Textile Cleaner\u003c\/h2\u003e\n\u003ch4\u003eWhich surfaces do I use VinylTexClean on?\u003c\/h4\u003e\n\u003cp\u003eOn marine vinyl upholstery, console and cabin trim, and hard-wearing fabrics. Keep it off leather, delicate Alcantara areas and plastic windows.\u003c\/p\u003e\n\u003ch4\u003eHow do I avoid water or dirt rings?\u003c\/h4\u003e\n\u003cp\u003eDose sparingly, let it dwell briefly, wipe off with a fresh side of the cloth and go over it dry. Don't work in the sun and don't let it dry on.\u003c\/p\u003e\n\u003ch4\u003eDoes the cleaner change the feel?\u003c\/h4\u003e\n\u003cp\u003eNo, it leaves a grippy-clean surface with no smeary film. For a visual refresh and protection afterwards, use „VinylGuard“ or „TexLock\/CoverGuard“.\u003c\/p\u003e\n\u003ch4\u003eDoes it help against salt haze?\u003c\/h4\u003e\n\u003cp\u003eYes. Salt and spray film are lifted safely and wiped off streak-free – provided you use clean cloths and work in the shade.\u003c\/p\u003e\n\u003ch4\u003eCan I use it off the boat too?\u003c\/h4\u003e\n\u003cp\u003eYes, on comparable vinyl\/textile surfaces with marine-grade toughness. For automotive interiors, reach for „InsideUp“ or „LeatherTexClean“ depending on the material.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01\/11\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56300945473871,"sku":"D1-KCX-77107-500ML-01","price":14.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77107-500ML-01_1.png?v=1778249513"},{"product_id":"koch-chemie-the-finisher-marine-vinylguard-vinylpflege","title":"THE FINISHER \"VinylGuard\" Vinyl Care","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „VinylGuard“ — vinyl care with a satin-matt, grippy feel\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use VinylGuard for on board? — The vinyl care conditions marine vinyl after cleaning, freshens the look back to satin-matt, cuts down on fresh dirt pickup (sunscreen or salt, say) and keeps a dry, non-greasy feel – spot-on for the bench seat, backrests \u0026amp; trim panels.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER VinylGuard Vinyl Care\u003c\/strong\u003e is the pinpoint conditioning for marine vinyl in the cockpit and cabin. After cleaning with VinylTexClean, \u003cstrong\u003eTHE FINISHER VinylGuard Vinyl Care\u003c\/strong\u003e lays down an ultra-thin care film that visibly calms colour depth and evens things out, without going glossy or greasy. \u003cstrong\u003eTHE FINISHER VinylGuard Vinyl Care\u003c\/strong\u003e keeps that grippy-dry feel, makes future cleans easier and holds the factory-fresh look steady even with constant skin, salt and sunscreen contact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatin-matt OEM finish:\u003c\/strong\u003e Rich, even look with no plasticky shine; the feel stays dry and grippy – perfect for seating surfaces and backrests.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEveryday protection on board:\u003c\/strong\u003e The care film keeps sunscreen, sweat and salt from grabbing hold; makes the next clean easier and slows down how fast dirt comes back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine system fit: \u003c\/strong\u003eApply after VinylTexClean; on fabric surfaces, top up with TexLock\/CoverGuard if you like – clean separation, repeatable results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVinyl care on board – finish, feel \u0026amp; the loads it takes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVinyl care\u003c\/strong\u003e on boats has to calm the look without turning slippery. The finely dosed polymer emulsion in THE FINISHER VinylGuard Vinyl Care cross-links thin on the surface, smooths out micro-texture and brings back that satin-matt evenness. Unlike oily dressings, it leaves no greasy film that grabs dust and sand. The usual loads from sunscreen, sweat and salt shed better day-to-day, because the surface no longer „clings“ and residue wipes off quicker. Seat bolsters, lounging areas and trim panels look rich and calm once buffed off, and they stay dry to the touch – exactly the feel you want on board.\u003c\/p\u003e\n\u003ch3\u003eHow to use – prep, lay it on thin, buff off clean\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e comes down to getting the base right: clean first (VinylTexClean), let it dry fully. Then put a few squirts of THE FINISHER VinylGuard Vinyl Care onto a soft applicator pad or microfibre cloth and spread it evenly in small sections. Let it flash off for 1–2 minutes and buff to a satin-matt finish with a fresh side of the cloth. Work in the shade on cool surfaces, don’t overdose and keep product from pooling in seams. On heavily used seat zones, two very thin passes beat one heavy one. Keep it off floors and anti-slip decks – a care film has no business there.\u003c\/p\u003e\n\u003ch3\u003eResult \u0026amp; routine – keeping the cockpit fresh, planning your care intervals\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eResult\u003c\/strong\u003e is a calm, evenly satin-matt vinyl with a natural grip. In use, a damp cloth is often enough to lift fingerprints and salt haze; for a deeper clean go back to VinylTexClean, and when the freshness fades, lay on a thin coat of VinylGuard again. Depending on use (sun, swim days, charter), the rhythm falls between 4 and 8 weeks. Deal with existing yellowing or old build-up separately up front (a targeted material clean, say), then THE FINISHER × Koch-Chemie „VinylGuard“ — vinyl care takes care of the steady, everyday look.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „VinylGuard“ — vinyl care\u003c\/h2\u003e\n\u003ch4\u003eWhere do I use VinylGuard?\u003c\/h4\u003e\n\u003cp\u003eOn marine vinyl: bench seats, backrests, trim panels in the cockpit and cabin. Don’t use it on floors or anti-slip decks.\u003c\/p\u003e\n\u003ch4\u003eWill the vinyl turn slippery or plasticky?\u003c\/h4\u003e\n\u003cp\u003eNo. The finish is satin-matt and dry to the grip. Always buff off the residue; too much product leads to shiny patches – work thin.\u003c\/p\u003e\n\u003ch4\u003eHow do I prep properly?\u003c\/h4\u003e\n\u003cp\u003eClean with VinylTexClean, let it dry thoroughly. Then lay VinylGuard on thin and buff to satin-matt. Avoid direct sun and hot surfaces.\u003c\/p\u003e\n\u003ch4\u003eCan I protect fabrics with it?\u003c\/h4\u003e\n\u003cp\u003eNo. VinylGuard is for vinyl. Seal fabrics after cleaning with TexLock\/CoverGuard – that keeps the feel right and the care repeatable.\u003c\/p\u003e\n\u003ch4\u003eDoes VinylGuard help against yellowing?\u003c\/h4\u003e\n\u003cp\u003eIt stabilises the fresh look and makes cleaning easier, but it doesn’t replace a brightening step. Treat existing yellowing on its own first; then bring in VinylGuard for upkeep.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01\/11\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56300965822799,"sku":"D1-KCX-77108-500ML-01","price":15.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77108-500ML-01_1.png?v=1778249516"},{"product_id":"koch-chemie-the-finisher-marine-allways-allesreiniger","title":"THE FINISHER \"AllWays\" All-Purpose Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"AllWays\" — All-purpose cleaner for marine pre-cleaning \u0026amp; deck care\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use AllWays for on board? — The marine all-purpose cleaner carefully loosens salt film, grease, spray and harbor dirt, wets evenly, rinses residue-free, and safely prepares gelcoat, non-skid decks, fender areas, and storage compartments for further care.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER AllWays All-Purpose Cleaner\u003c\/strong\u003e is your versatile pre-cleaning step for boats: it softens salt and harbor dirt, oily film, and rubber scuffs, creeps into edges and profiles, and rinses off cleanly – without greasy residue. On gelcoat, non-skid decks, painted consoles, rubber strips, and in durable storage compartments, it quickly gets the surface \"ready to go\" before CleanMarine (shampoo), SeaYou (glass), and BodyGuard (spray protection) take over. This keeps the care chain on board clearly separated, reproducible, and fault-tolerant.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine Pre-Cleaning:\u003c\/strong\u003e Carefully loosens salt\/spray film, oily harbor haze, and rubber marks (fenders\/ropes) to make the main wash easier and less prone to scratches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck \u0026amp; Gelcoat Compatible:\u003c\/strong\u003e Stable film with good creeping ability on non-skid and smooth gelcoat; rinses off thoroughly and leaves an even base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-clean on board:\u003c\/strong\u003e Perfect bridge to CleanMarine (contact wash), SeaYou (visible surfaces) and BodyGuard (hydrophobic finish); vinyl\/textile remain reserved for VinylTexClean and CoverGuard respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eMarine Pre-Cleaning – Salt, Harbor Haze \u0026amp; Rubber Scuffs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMarine pre-cleaning\u003c\/strong\u003e means chemically separating the typical mix of salt, spray, diesel\/oil mist, and rubber marks. THE FINISHER AllWays All-Purpose Cleaner forms an even film that adheres well in profile edges, around fittings, and along the waterline, without running off quickly. Salt and organic residues are bound in micelles and reliably removed during rinsing; rubber scuffs from fenders and ropes can be visibly reduced after a short softening period and light brushing. Because the cleaner dries cleanly, the subsequent wash starts without streaking, and BodyGuard can adhere evenly later. On sensitive metals or old, porous seals, work with short dwell times and a small test area to ensure the appearance and feel remain calm.\u003c\/p\u003e\n\u003ch3\u003eDeck \u0026amp; Gelcoat – Safely clean non-skid, relieve waterline\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDeck \u0026amp; Gelcoat\u003c\/strong\u003e demand control, not harshness. On non-skid areas, the fine-foaming film lifts dirt from the texture without smoothing the surface; a soft deck brush supports the mechanics, then rinse generously. On smooth gelcoat, the hardtop hood, and around the waterline, the cleaner carefully loosens harbor haze, splashes, and light soot stains; when moved in a crosshatch pattern with a pad\/brush, no patchy areas are created. Treat fender marks and black scuffs in sections, work quickly in the shade, and rinse completely. For clear window surfaces, SeaYou remains responsible, as AllWays can cause unnecessary rework on plastic panes; for visible yellowing before finishing, a separate, material-compatible brightening routine helps before BodyGuard provides hydrophobic ease of care.\u003c\/p\u003e\n\u003ch3\u003eApplication \u0026amp; Safety – Dosage, Dwell Time, Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication \u0026amp; Safety\u003c\/strong\u003e follow a simple logic: cool surface, shade, pre-wetting. Spray THE FINISHER AllWays All-Purpose Cleaner in sections, let it work for 2-3 minutes, agitate with a brush if necessary, and then rinse generously with fresh water. Do not let it dry – wind, sun, and hot surfaces shorten dwell times. The cleaner works reliably in storage compartments, on painted consoles, and rubber strips; for bare, sensitive metals and anodized parts, test briefly and keep the dwell time short. Clean vinyl upholstery and textile elements separately with VinylTexClean; after complete drying, CoverGuard protects heavily used textile areas. Windows and instrument covers remain with SeaYou to prevent streaking. Use CleanMarine for contact washing and top with BodyGuard if necessary – this ensures predictable and repeatable care on board.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions about THE FINISHER × Koch-Chemie “AllWays” — All-purpose cleaner\u003c\/h2\u003e\n\u003ch4\u003eOn which marine surfaces do I use AllWays?\u003c\/h4\u003e\n\u003cp\u003eOn gelcoat, non-skid decks, painted consoles, rubber strips, and in durable storage compartments. Clean vinyl upholstery, textiles, and windows separately (VinylTexClean\/CoverGuard or SeaYou).\u003c\/p\u003e\n\u003ch4\u003eHow do I prevent stains on non-skid?\u003c\/h4\u003e\n\u003cp\u003eWork in the shade, apply sparingly, let it loosen briefly, agitate with a soft brush, and rinse completely. Do not let it dry; wash out residual dirt with CleanMarine.\u003c\/p\u003e\n\u003ch4\u003eDoes AllWays help against fender marks?\u003c\/h4\u003e\n\u003cp\u003eYes, rubber scuffs can be significantly reduced after a short softening and light agitation. Stubborn old marks may require a second, quick pass.\u003c\/p\u003e\n\u003ch4\u003eIs the cleaner suitable for plastic windows?\u003c\/h4\u003e\n\u003cp\u003eNo, SeaYou is intended for that. AllWays can cause rework on polycarbonate\/acrylic; always treat visible surfaces separately.\u003c\/p\u003e\n\u003ch4\u003eCan I use it in the engine room?\u003c\/h4\u003e\n\u003cp\u003eFor \"light-duty\" yes: cool down, protect electrically sensitive areas, spray precisely, agitate with a brush, and rinse moderately. Remove residues completely.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56300987318607,"sku":"D1-KCX-77109-500ML-01","price":10.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77109-500ML-01_1.png?v=1778249518"},{"product_id":"koch-chemie-the-finisher-marine-waxpolish-wachspolitur","title":"THE FINISHER \"WaxPolish\" Wax Polish","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „WaxPolish“ — Wax Polish for a Rich Gelcoat Finish\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat makes WaxPolish ideal on board? — The marine wax polish visibly enhances gelcoat and glossy paint surfaces, optically smooths fine hazing, and leaves a uniform, water-repellent wax film. Easy to buff, durable in everyday use, perfect after routine washing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER WaxPolish Wax Polish\u003c\/strong\u003e is your quick shine and protection upgrade for boats: on smooth gelcoat and high-gloss painted surfaces, it creates a rich, calm deep gloss and a thin, hydrophobic protective film. Ideal after cleaning with CleanMarine or light pre-polishing work – as a standalone finish before your next trip. Application remains forgiving, the appearance is even, and the surface feels clean and smooth.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRich Deep Gloss on Gelcoat: \u003c\/strong\u003eoptically smooths the appearance, conceals fine hazing, and allows water to run off cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Handling:\u003c\/strong\u003e creamy application, short flash-off time, streak-free buffing – even on larger panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Fit on Board: \u003c\/strong\u003eapply after CleanMarine\/polishing; later \"boost\" hydrophobicity with BodyGuard without overriding the wax.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eGelcoat Wax Polish – Shine, Smoothness \u0026amp; Protection in One Step\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGelcoat Wax Polish\u003c\/strong\u003e means optically calming the surface while simultaneously building a thin, protective film. THE FINISHER WaxPolish Wax Polish works as a finely tuned wax formula: mild cleaning components remove light oxidation haze, the polishing phase smooths the microstructure, the wax film flashes off evenly and promotes beading\/sheeting. Result: a rich, deep appearance without a greasy look. On intact gelcoat, one application is often sufficient; for visibly dull areas, a prior correction with RoughCut\/FineCut or the one-step solution PerfectOne is recommended – after which WaxPolish seals the result.\u003c\/p\u003e\n\u003ch3\u003eApplication on Board – Preparation, Application, Buffing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e begins with a clean base: wash the boat in the shade with CleanMarine, then dry. Apply THE FINISHER WaxPolish Wax Polish thinly to a soft pad\/cloth, spread panel by panel in a cross-hatch pattern, and allow to flash off briefly. As soon as the film appears \"clear,\" buff off streak-free with a fresh microfiber side. Work in sections on large surfaces, avoiding edges and fittings. Do not apply on heated surfaces or in direct sunlight, and never allow the product to dry. Plastics, non-skid decks, vinyl, and textile elements are excluded – for these, RubMarine, VinylGuard, or TexLock\/CoverGuard are available.\u003c\/p\u003e\n\u003ch3\u003eDurability \u0026amp; Care Plan – Smartly Combining Wax Finish\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDurability \u0026amp; Care Plan\u003c\/strong\u003e are based on usage (sun, salt, mooring time). If you regularly maintain with CleanMarine, the finish remains visibly calmer, and dirt adheres less. Between washes, you can refresh hydrophobicity with BodyGuard without changing the wax appearance. Remove light water spots after rinsing with a clean cloth; treat stronger salt rims briefly before the next wax application. In case of noticeable loss of gloss: clean the surface, optionally polish selectively, then apply THE FINISHER WaxPolish Wax Polish thinly again and buff out – rather two thin applications than one \"heavy\" application.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions about THE FINISHER × Koch-Chemie \"WaxPolish\" — Wax Polish\u003c\/h2\u003e\n\u003ch4\u003eOn which surfaces do I use WaxPolish?\u003c\/h4\u003e\n\u003cp\u003eOn smooth gelcoat and high-gloss painted surfaces on board. Do not use on non-skid decks, matte gelcoat areas, vinyl, textiles, or plastic windows.\u003c\/p\u003e\n\u003ch4\u003eDo I need to polish beforehand?\u003c\/h4\u003e\n\u003cp\u003eOnly for dull, aged, or visibly scratched areas. Intact surfaces can be refined directly with WaxPolish after washing with CleanMarine.\u003c\/p\u003e\n\u003ch4\u003eHow do I prevent streaks?\u003c\/h4\u003e\n\u003cp\u003eWork thinly, apply in the shade, allow to flash off briefly, and buff out completely with a fresh microfiber side. Immediately wipe off any excess.\u003c\/p\u003e\n\u003ch4\u003eIs WaxPolish compatible with BodyGuard?\u003c\/h4\u003e\n\u003cp\u003eYes. WaxPolish sets the optical base tone, BodyGuard later refreshes hydrophobicity. Sequence: first wax-based polish, then spray protection (if necessary, with a time delay).\u003c\/p\u003e\n\u003ch4\u003eHow often should I refresh?\u003c\/h4\u003e\n\u003cp\u003eDepending on use. With regular washing, a wax refresh per season is often sufficient; more often with a lot of salt\/sun. Apply thinly, do not \"build up\" layers.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"250ml","offer_id":56301034242383,"sku":"D1-KCX-77101-250ML-01","price":14.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77101-250ML-01_1.png?v=1778249520"},{"product_id":"koch-chemie-the-finisher-marine-finecut-schritt-2-politur","title":"THE FINISHER \"FineCut\" Step 2 Polish","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"FineCut\" — Stage-2 polish for a clear, hologram-free finish\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use FineCut for? — As a stage-2 polish after a coarse cut, FineCut lifts haze and holograms, visibly clears up the paint and sets up a high-gloss, clean finish ready for your sealant — fast, low-dust, repeatable.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER FineCut Stage 2 Polish\u003c\/strong\u003e is your precise refining step after defect correction. It takes cut marks, grey haze and light swirls out of the clear coat, finishes down smoothly and leaves a calm, high-gloss look — the perfect bridge between coarse correction (\u003cem\u003eRoughCut\u003c\/em\u003e) and protection (\u003cem\u003eBodyGuard\u003c\/em\u003e or wax-based finishes). Day-to-day that means less rework, clean wipe-off and reliable results on common OEM clear coats — spot on for daily drivers, sales prep and \"clearing up\" after spot corrections.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTargeted refining:\u003c\/strong\u003e removes holograms and cut haze, sharpens reflections, builds a calm, deep paint look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to work:\u003c\/strong\u003e long open time, low-dust matrix, wipes off easily — spot on for a DA workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem logic:\u003c\/strong\u003e perfect it after \u003cem\u003eRoughCut\u003c\/em\u003e, then protect (e.g. \u003cem\u003eBodyGuard\u003c\/em\u003e); for quick all-in-one jobs, \u003cem\u003ePowerSpeedPolish\u003c\/em\u003e is ready to go.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eStage-2 polish – microabrasives, oil matrix \u0026amp; finish stability\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStage-2 polish\u003c\/strong\u003e means controlled removal with a fine finishing character. FineCut's microabrasives grab the leftover defects from the cut, break down evenly and, at the end, finish very fine. The moderately oily carrier matrix keeps the pad \"open\" for a long time, cuts down dry running and helps a smear-free wipe-off. The result is a clear, crisp gloss with no \"milky\" zones and clearly fewer holograms — the ideal starting point for any sealant. Because FineCut doesn't leave heavy fillers sitting on top, the look stays stable and doesn't fall apart after the first wash.\u003c\/p\u003e\n\u003ch3\u003eAutomotive workflow – pad choice, pressure, cross-hatch \u0026amp; buffing off\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive workflow\u003c\/strong\u003e: after pre-wash (TropicSnow), hand wash (MagicShampoo) and, if needed, a coarse step with RoughCut, you work panel by panel. Start with a medium-hard foam pad; switch to a soft finishing pad on sensitive, soft clear coats, while on hard, durable paints a medium-firm foam can improve the bite. Prime the pad thin, 3–4 drops of product, spread it on a low speed, then polish in even cross-hatch passes with moderate pressure until the film goes visibly and noticeably \"thin\". At the end, back off the pressure and stroke speed a touch (\"jeweling\") to pull out that last bit of gloss. Work edges and fresh paint gently, keep off plastics or tape them up. Wipe residue off fully with a fresh, dense microfibre — the finish should look dry, clear and cloud-free. After that you seal to taste: fast and hydrophobic with BodyGuard, classic deep gloss with ShineSpeedPolish as a wax-based finish, or a quick \"pop\" in between with JustPerfect.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; limits – paint hardness, one-step alternative \u0026amp; protection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility \u0026amp; limits\u003c\/strong\u003e: FineCut works brilliantly on most OEM clear coats — on very hard paints it may need a longer set or a slightly bittier pad, on very soft paints a gentle, short follow-up with a soft pad helps. When time is tight and you need defect removal \u003cem\u003eand\u003c\/em\u003e finish in one go, reach for \u003cem\u003ePowerSpeedPolish\u003c\/em\u003e as a one-step. If there are only fine wash marks and you want protection, \u003cem\u003eShineSpeedPolish\u003c\/em\u003e (wax polish) is often enough. Don't polish matte paints\/wraps or PPF — you'd change the matte level or the glossy look you didn't mean to touch. After FineCut, a layer of protection always goes onto the clean finish: \u003cem\u003eBodyGuard\u003c\/em\u003e for hard-wearing hydrophobicity or — if you fancy it — a waxy finish. Clean towels, cool panels and shade are a must; if a pad starts dusting, it's overloaded — blow it out or swap it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie \"FineCut\" — Stage 2 Polish\u003c\/h2\u003e\n\u003ch4\u003eHow is FineCut different from RoughCut?\u003c\/h4\u003e\n\u003cp\u003eRoughCut is the coarse defect removal (step 1), FineCut refines afterwards: it takes out haze\/holograms and brings clarity to the look. The two build on each other.\u003c\/p\u003e\n\u003ch4\u003eDA or rotary?\u003c\/h4\u003e\n\u003cp\u003eA DA gives the safest, hologram-free result. Only work with a rotary if you're experienced, and calm the surface down with a short DA finishing pass.\u003c\/p\u003e\n\u003ch4\u003eDoes FineCut dust?\u003c\/h4\u003e\n\u003cp\u003eWith correct dosing, cool panels and clean pads it's low-dust. Dust usually comes from overloaded pads or too much heat — blow out\/swap pads regularly.\u003c\/p\u003e\n\u003ch4\u003eCan I seal straight after?\u003c\/h4\u003e\n\u003cp\u003eYes. Take off the residue fully and then seal with BodyGuard or — if you like — set a waxy tone with ShineSpeedPolish\/WaxPolish.\u003c\/p\u003e\n\u003ch4\u003eSuitable for gelcoat too?\u003c\/h4\u003e\n\u003cp\u003eIn spots yes, e.g. after stronger steps, but you'll work large gelcoat areas more efficiently with PerfectOne (one-step) and then lock them in with WaxPolish\/BodyGuard.\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 1 November 2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"250ml","offer_id":56301049971023,"sku":"D1-KCX-77102-250ML-01","price":16.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77102-250ML-01_1.png?v=1778249523"},{"product_id":"koch-chemie-the-finisher-marine-perfectone-onesteppolitur","title":"THE FINISHER \"PerfectOne\" OneStepPolish","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „PerfectOne“ — OneStepPolish for gelcoat gloss in a single pass\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhy is PerfectOne ideal on board? — The one-step polish pulls dull oxidation haze and fine scratches out of gelcoat, finishes down low on holograms and lays down a deep, clear look in one go – the perfect base for WaxPolish or BodyGuard.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER PerfectOne OneStepPolish\u003c\/strong\u003e is our marine shortcut for smooth gelcoat and high-gloss painted surfaces on the boat. It pairs real cut with a safe finish, pulls out oxidation grey and wash haze and leaves a calm, deep look that wipes off easily. On big panels PerfectOne works long and low on dust – perfect for a large-throw dual-action. Once you’ve polished, you seal the result either the classic way with WaxPolish or hydrophobic with BodyGuard, depending on what you’re after.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong one-step for gelcoat: \u003c\/strong\u003evisibly knocks back oxidation \u0026amp; fine scratches, gives a crisp mirror and a clean reflection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe finishing:\u003c\/strong\u003e long open time, low-hologram finish, easy buff-off – workable on big boat panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkflow on board:\u003c\/strong\u003e polish after CleanMarine, then set WaxPolish (deep gloss) or BodyGuard (hydrophobic).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eOne-step polish for gelcoat – cut \u0026amp; finish in balance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOneStepPolish\u003c\/strong\u003e on gelcoat lives from the tuned interplay between micro-abrasives and a matrix that carries but never smears. PerfectOne gives you the bite you need up front to break chalky oxidation haze, then finishes down fine and pulls a clear, low-hologram look. Because gelcoat is thermally slow, that long open time works for you: you can work the product through cleanly without chasing residue in a hurry. What you get isn’t a masked shine but an optically settled, smooth surface – perfect for laying protection down evenly.\u003c\/p\u003e\n\u003ch3\u003eUse on board – prep, pad choice \u0026amp; machine work\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUse\u003c\/strong\u003e starts with a clean base: wash the boat in the shade with CleanMarine and dry it, tape off sensitive edges\/fittings. For the main pass a medium foam pad on the dual-action (large throw) does the job – with more defects you can step up to a firmer pad in a controlled way, and go soft on sensitive areas. Set 3–4 pea-sized drops, spread on a low setting, then work in even crosshatches with moderate pressure until the film goes visibly thin and clear. To finish, ease off pressure\/passes („jeweling“) and wipe all residue off fully with fresh microfibre. Keep it off anti-slip decks, textile\/vinyl, polycarbonate\/acrylic windows and matte surfaces; avoid heated areas and full sun.\u003c\/p\u003e\n\u003ch3\u003eResult \u0026amp; care plan – protection choice, follow-up \u0026amp; limits\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eResult\u003c\/strong\u003e is a deep, calm gelcoat finish with real slickness under your hand. For seasonal and everyday protection you lay WaxPolish down straight after wiping (classic deep gloss) or go with BodyGuard for a hydrophobic, easy-to-refresh spray seal. Stubborn, deeper scratches or heavy chalking need a quick correction pass with RoughCut first; fine leftover haze after a heavy cut you pull away with FineCut and can run PerfectOne as a fast blending pass. Interim washes with CleanMarine hold the look; seeing gloss drop off? Clean the surface, test a spot, run PerfectOne again panel by panel – two lean passes beat one heavy coat.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „PerfectOne“ — OneStepPolish\u003c\/h2\u003e\n\u003ch4\u003eWhat surfaces do I use PerfectOne on?\u003c\/h4\u003e\n\u003cp\u003eOn smooth gelcoat and high-gloss marine painted surfaces. Don’t use it on anti-slip decks, matte surfaces, vinyl\/textile or plastic windows.\u003c\/p\u003e\n\u003ch4\u003eIs PerfectOne enough for heavy oxidation?\u003c\/h4\u003e\n\u003cp\u003eFor medium oxidation, yes. On heavily chalked gelcoat, run RoughCut first, then even it out with PerfectOne and seal.\u003c\/p\u003e\n\u003ch4\u003eDual-action or rotary?\u003c\/h4\u003e\n\u003cp\u003eA dual-action (large throw) gives the safest, lowest-hologram finish on big panels. Only go rotary if you’re experienced, and settle it with a short, gentle finishing pass.\u003c\/p\u003e\n\u003ch4\u003eDoes PerfectOne leave protection behind?\u003c\/h4\u003e\n\u003cp\u003eIt’s all about correction \u0026amp; finish. For durable everyday protection, put WaxPolish or BodyGuard on straight after.\u003c\/p\u003e\n\u003ch4\u003eDoes the polish dust?\u003c\/h4\u003e\n\u003cp\u003eWith fresh pads, a moderate amount of product and cool panels it stays low on dust. Overloaded pads or heat push more dust – blow out\/swap pads regularly.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"250ml","offer_id":56301061538127,"sku":"D1-KCX-77103-250ML-01","price":21.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77103-250ML-01_1.png?v=1778249525"},{"product_id":"koch-chemie-the-finisher-marine-roughcut-schritt-1-politur","title":"THE FINISHER “RoughCut” Step 1 polish","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie “RoughCut” — Step 1 polish for fast, controlled defect removal\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhen do I reach for RoughCut? — When you want to visibly pull wash marks, heavier swirls and sanding or oxidation haze out of the paint. This Step 1 polish gives you high cut with a long open time, a low-dust run, and sets the finish up perfectly for FineCut \u0026amp; protection.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER RoughCut Step 1 polish\u003c\/strong\u003e is our powerful way into paint correction: high defect removal, a smooth run, clean wipe-off. On common OEM clearcoats, \u003cstrong\u003eTHE FINISHER RoughCut Step 1 polish\u003c\/strong\u003e pulls grey haze and heavy wash marks out under control, without flooding the panel with dust. After the cut you clear the picture up with FineCut (step 2) and lock the work in with BodyGuard or a waxy finishing stage. That gives you a repeatable workflow from the first polishing pass to protection – fast, logical, safe. \u003cstrong\u003eTHE FINISHER RoughCut Step 1 polish\u003c\/strong\u003e reliably hands you the base for a crisp, low-hologram finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh cut, controlled run: \u003c\/strong\u003epulls defects out visibly, long open time, clean wipe-off – ideal for DA workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow dust \u0026amp; efficient:\u003c\/strong\u003e reduced dusting with proper pad care; clear residue control for clean work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem logic:\u003c\/strong\u003e polish after TropicSnow\/MagicShampoo, refine with FineCut and lock it in with BodyGuard or ShineSpeedPolish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eStep 1 polish – micro-abrasives, matrix \u0026amp; defect removal\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1 polish\u003c\/strong\u003e means: take substance off without fraying the finish. RoughCut’s micro-abrasives bite into defects quickly, spread evenly and “drive out” fine at the end. The load-bearing but non-greasy matrix keeps the pad open for a long time, minimises dry running and lets you use the whole work cycle instead of quitting early. The result: clear, defined paint with clearly reduced scratches and haze – ready to be refined with FineCut. Because the polish leaves no overdone fillers standing, the picture stays stable and doesn’t turn after the first wash.\u003c\/p\u003e\n\u003ch3\u003eAutomotive workflow – pad choice, pressure \u0026amp; cross-hatch in practice\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive workflow\u003c\/strong\u003e starts with a clean base (TropicSnow → MagicShampoo). Start with a medium-hard foam pad; depending on paint hardness you can go firmer or softer. Prime the pad thin, put down 3–4 small drops, spread on a low setting, then work in even cross-hatch passes with moderate pressure until the film gets visibly thin. At the end, ease off pressure and stroke speed a touch to pull the panel “to clarity”. Work edges, fresh paint and sensitive zones gently, and mask off adjacent plastics. Take residues off fully with a dense microfibre. Now comes the step 2 pass with FineCut for gloss, depth and hologram safety; after that seal to your target look (BodyGuard for hydrophobicity, ShineSpeedPolish for waxy saturation or JustPerfect as a later pop booster).\u003c\/p\u003e\n\u003ch3\u003eLimits \u0026amp; alternatives – paint hardness, one-step \u0026amp; material choice\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLimits \u0026amp; alternatives\u003c\/strong\u003e: very hard clearcoats allow longer sets or bitier pads; on soft\/unstable paints a gentle finishing pass reduces the risk of fresh haze. When time is tight and defect removal plus finish in one go is enough, PowerSpeedPolish is the one-step route; for only light marks ShineSpeedPolish does the job. Matte paints\/wraps and PPF stay off the table – polishing would change the matte level or the film look. Note: on gelcoat use it only in a targeted way and with experience; for large boat surfaces PerfectOne works more efficiently and with fewer holograms, and there you lock the finish in with WaxPolish or BodyGuard.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie “RoughCut” — Step 1 polish\u003c\/h2\u003e\n\u003ch4\u003eHow is RoughCut different from FineCut?\u003c\/h4\u003e\n\u003cp\u003eRoughCut is the strong defect removal (step 1). FineCut refines afterwards: it takes out cut haze\/holograms and brings clarity and gloss into the picture.\u003c\/p\u003e\n\u003ch4\u003eDA or rotary?\u003c\/h4\u003e\n\u003cp\u003eA DA gives you the safest, low-hologram result. Only work with a rotary if you’re experienced, and calm the surface afterwards with a short DA finishing pass.\u003c\/p\u003e\n\u003ch4\u003eDoes RoughCut dust?\u003c\/h4\u003e\n\u003cp\u003eWith fresh pads, a moderate amount of product and cool panels it stays low-dust. Dust usually comes from overloaded pads, heat or too-long dry runs.\u003c\/p\u003e\n\u003ch4\u003eDoes RoughCut remove sanding marks?\u003c\/h4\u003e\n\u003cp\u003eYes, light to medium sanding marks and heavy wash swirls get visibly reduced. For the final picture FineCut always follows as step 2.\u003c\/p\u003e\n\u003ch4\u003eWhat comes after RoughCut?\u003c\/h4\u003e\n\u003cp\u003eDegreasing the panel isn’t necessary; take residues off fully, then FineCut for gloss\/clarity. Finally seal with BodyGuard or set a waxy finish.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"250ml","offer_id":56301092176207,"sku":"D1-KCX-77104-250ML-01","price":22.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77104-250ML-01_1.png?v=1778249528"},{"product_id":"koch-chemie-the-finisher-marine-cleanmarine-bootsshampoo","title":"THE FINISHER \"CleanMarine\" Boat Shampoo","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"CleanMarine\" — Boat Shampoo for Salt-Free, Smooth Surfaces\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does CleanMarine do on board? — The pH-balanced boat shampoo safely removes salt and harbor film, builds a highly lubricious wash film, promotes clean rinsing, and preserves existing protective layers. For gelcoat, painted surfaces, and smooth plastics – fast, controlled, low-streak.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER CleanMarine Boat Shampoo\u003c\/strong\u003e is the straightforward main wash for smooth gelcoat and high-gloss painted surfaces. The surfactant base encapsulates salt, spray, and organic residues, while lubricating additives significantly reduce friction during contact. This allows for safer washing, cleaner rinsing, and preservation of existing waxes or spray sealants. Ideal after a brief pre-cleaning (AllWays) and before a hydrophobic finish with BodyGuard – for a surface that visibly stays fresh longer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSalt \u0026amp; Spray Under Control: \u003c\/strong\u003eEncapsulates residues and rinses them away without residue – fewer water spots, a calmer finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Lubricity:\u003c\/strong\u003e Reduces friction during brushing\/washing and helps prevent micro-scratches – especially on dark, smooth surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLSP-Friendly:\u003c\/strong\u003e Preserves wax and spray protection instead of stripping it; perfect base for BodyGuard as a seasonal topper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eBoat Shampoo – Salt Film, Foam Stability \u0026amp; Lubricating Additives\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBoat shampoo\u003c\/strong\u003e like CleanMarine combines an efficient, yet material-friendly surfactant formula with controlled foaming. Salt crystals and harbor film are bound in micelles, allowing you to rinse them away without streaking. The resulting wash film remains lubricious for a long time, carries dirt out of pores and edges, and facilitates the safe movement of a wash mitt or soft deck brush. Because the formula is pH-balanced, the shine and hydrophobic effect of existing wax or spray layers are preserved – the result looks calm, clean, and feels smooth.\u003c\/p\u003e\n\u003ch3\u003eApplication On Board – Pre-Rinse, Wash, Rinse\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e starts in the shade on cool surfaces. First, pre-rinse with fresh water until salt and loose debris run off. Dose CleanMarine according to instructions, lather it in a bucket, and wash section by section from top to bottom. For non-skid areas, move a soft brush crisscross; for smooth gelcoat\/painted surfaces, use a wash mitt in long strokes without pressure. Do not let the shampoo dry, rinse generously, and let it air dry or wipe with a clean cloth. Afterwards, perfect visible surfaces with SeaYou; clean and care for vinyl\/textile separately.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; Care Plan – Gelcoat, Non-Skid, Protective Build-up\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e includes smooth gelcoat, high-gloss maritime painted panels, and smooth plastics. Non-skid is safely cleaned without \"smoothing\" the texture. For matte or rough special surfaces, test first and apply without pressure. For seasonal logic, apply: Pre-cleaning (AllWays) → CleanMarine as the main wash → optional PerfectOne\/WaxPolish for optical saturation → BodyGuard as a hydrophobic, quickly renewable finish. This keeps the surface cleaner for longer, makes rinsing easier, and ensures reproducible care – even with intense sun exposure and salt loads.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions about THE FINISHER × Koch-Chemie \"CleanMarine\" — Boat Shampoo\u003c\/h2\u003e\n\u003ch4\u003eDoes CleanMarine attack existing waxes?\u003c\/h4\u003e\n\u003cp\u003eNo. The pH-balanced formula is LSP-friendly and preserves wax and spray protection. You can refresh hydrophobicity after washing with BodyGuard.\u003c\/p\u003e\n\u003ch4\u003eAlso suitable for non-skid?\u003c\/h4\u003e\n\u003cp\u003eYes. Work crisscross with a soft brush and rinse thoroughly. The shampoo cleans without affecting slip resistance.\u003c\/p\u003e\n\u003ch4\u003eHow do I prevent water spots?\u003c\/h4\u003e\n\u003cp\u003eWash cool in the shade, do not let it dry, rinse generously, and if necessary, dry with a clean cloth afterwards. Always remove salt with fresh water beforehand.\u003c\/p\u003e\n\u003ch4\u003eCan I clean plastic windows with it?\u003c\/h4\u003e\n\u003cp\u003eFor polycarbonate\/acrylic, it's better to use SeaYou. CleanMarine is the main shampoo for the hull and deck, not the specialist for windows.\u003c\/p\u003e\n\u003ch4\u003eHow often to wash?\u003c\/h4\u003e\n\u003cp\u003eAs needed: after every trip with a lot of spray or regularly weekly during the season. A short freshwater rinse between washes reduces build-up.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56301200638287,"sku":"D1-KCX-77105-1L-01","price":21.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77105-1L-01_1.png?v=1778249530"},{"product_id":"koch-chemie-the-finisher-marine-bodyguard-spruhversiegelung","title":"THE FINISHER \"BodyGuard\" Spray Sealant","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „BodyGuard“ — Spray Sealant (Marine) for gelcoat slickness \u0026amp; strong beading\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use BodyGuard for on board? — This marine spray sealant lays down a hydrophobic, even protective film on gelcoat and glossy painted surfaces in minutes, visibly cuts how hard salt clings, adds slickness and makes the next wash quicker – as a drying aid or on a dry surface.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER BodyGuard Spray Sealant\u003c\/strong\u003e is your fast protection-and-slickness step after the wash. On smooth gelcoat and high-gloss marine-painted panels it builds a thin, even layer of protection: water sheets off cleanly, salt and spray cling less, and the surface feels „dry-slick“. Ideal as a drying aid straight after \u003cem\u003eCleanMarine\u003c\/em\u003e, or as a quick finish on a dry surface. Keep it off non-skid, teak, vinyl or plastic windows – those stay the job of dedicated deck and material products.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHydrophobic in minutes: strong beading\/sheeting, noticeably slicker run-off – you can feel the salt and grime clinging less.\u003c\/li\u003e\n\u003cli\u003eEasy \u0026amp; streak-free: thin, even flash-off; works as a drying aid or a dry finish.\u003c\/li\u003e\n\u003cli\u003eFits the marine system: sits behind CleanMarine and over PerfectOne\/WaxPolish – top up the protection without any „layer build-up“.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSpray sealant for your boat – hydrophobicity, slickness \u0026amp; salt resistance\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003espray sealant\u003c\/strong\u003e on gelcoat needs two things: thin polymers that sit flat and evenly, and a controlled flash-off. BodyGuard builds exactly that kind of film: it smooths out the micro-texture, gets water beading off cleanly and cuts how much salt, spray and harbour film grab the surface. The result isn’t „oily“, it’s dry and quiet – perfect when you want a clear, easy-to-rinse surface again fast after a sail. Because the layer is fine, the reflection stays crisp; at the same time dirt walks off quicker when you rinse, which takes the load off your care intervals.\u003c\/p\u003e\n\u003ch3\u003eUse on board – drying aid or dry finish\u003c\/h3\u003e\n\u003cp\u003eAlways \u003cstrong\u003eapply\u003c\/strong\u003e in the shade on a cool surface. After the CleanMarine wash, rinse down generously with fresh water. \u003cem\u003eDrying aid:\u003c\/em\u003e 1–2 spritzes per section onto the wet panel or into the drying towel, pull off the water, then go over it streak-free with a fresh microfibre side. \u003cem\u003eDry finish:\u003c\/em\u003e use two towels (one to spread, one to buff off) and work panel by panel without pressure. Take off any excess straight away, never let the product dry on. \u003cstrong\u003eNo-go:\u003c\/strong\u003e non-skid decks, teak, vinyl upholstery, polycarbonate\/acrylic windows – they end up slippery or smeary. Give fittings and edges a quick dry wipe after any contact.\u003c\/p\u003e\n\u003ch3\u003eCare plan \u0026amp; compatibility – pairing with WaxPolish\/PerfectOne\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003ecare plan\u003c\/strong\u003e: after the main wash with CleanMarine, BodyGuard sets the everyday protection tone for the hull and smooth deck areas. You can run BodyGuard on its own, or lay it over an optical finish: \u003cem\u003ePerfectOne\u003c\/em\u003e (one-step on gelcoat) → BodyGuard for hydrophobicity; or \u003cem\u003eWaxPolish\u003c\/em\u003e for classic deep gloss → BodyGuard later as a quick hydrophobicity booster. Depending on sun, salt and time in the water, top it up in minutes every few weeks. When the beading starts to fade: wash, lay a thin coat back on – no thick layers, no „gunking it up“.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „BodyGuard“ — Spray Sealant (Marine)\u003c\/h2\u003e\n\u003ch4\u003eWhich surfaces is it for?\u003c\/h4\u003e\n\u003cp\u003eOn smooth gelcoat, high-gloss marine paint and smooth plastics. Not on non-skid, teak, vinyl or plastic windows.\u003c\/p\u003e\n\u003ch4\u003eDrying aid or dry – which is better?\u003c\/h4\u003e\n\u003cp\u003eBoth work. As a drying aid it cuts friction while you dry off; dry application gets you the „quietest“ finish. Decide by your time and the look you’re after.\u003c\/p\u003e\n\u003ch4\u003eDoes BodyGuard play nicely with WaxPolish?\u003c\/h4\u003e\n\u003cp\u003eYes. Top BodyGuard over WaxPolish later on to boost the hydrophobicity without painting over the wax look.\u003c\/p\u003e\n\u003ch4\u003eHow often should I top it up?\u003c\/h4\u003e\n\u003cp\u003eEvery few weeks, depending on use. After salty legs or a long stretch in the water, just lay a thin coat back on after the wash.\u003c\/p\u003e\n\u003ch4\u003eSeal the windows \u0026amp; vinyl too?\u003c\/h4\u003e\n\u003cp\u003eNo. Clean windows separately with SeaYou, clean vinyl with VinylTexClean and protect it with VinylGuard. That keeps the feel and look right for each material.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56301331022159,"sku":"D1-KCX-77113-1L-01","price":35.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77113-1L-01_1.png?v=1778249533"},{"product_id":"koch-chemie-the-finisher-marine-hellowhite-antigilb","title":"THE FINISHER \"HelloWhite\" AntiGilb","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „HelloWhite“ — AntiGilb for clean waterlines \u0026amp; fresh whites\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eHow does HelloWhite work? — The AntiGilb chemically loosens waterline yellowing and light rust\/harbour film, brings the white back to gelcoat and glossy painted surfaces, rinses off neutral, and works as a targeted intermediate step before you protect with WaxPolish or BodyGuard.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER HelloWhite AntiGilb\u003c\/strong\u003e is your targeted stain remover against gelcoat yellowing at the waterline, bow, transom and around fittings. The active, controlled-flash formula softens organic „Tea-Stains“ and light metal\/harbour film so you can rinse them off without harsh mechanics. After treatment the surface looks visibly fresher and makes the ideal base for a wax- or spray-based finish. In the system, \u003cstrong\u003eTHE FINISHER HelloWhite AntiGilb\u003c\/strong\u003e sits between the main wash (CleanMarine) and protection (WaxPolish\/BodyGuard) – right where gelcoat shows those yellowed shadows.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTargeted de-yellowing:\u003c\/strong\u003e loosens waterline yellowing and light rust\/harbour film in a controlled way – no sanding marathons and no grey afterimage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean handling:\u003c\/strong\u003e wets evenly, works in fast, rinses off neutral; ideal for spot areas instead of „all or nothing“.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine system fit:\u003c\/strong\u003e use after CleanMarine, then lock it in with WaxPolish (deep gloss) or BodyGuard (hydrophobicity).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAntiGilb – cause, how it works \u0026amp; reading the material\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAntiGilb\u003c\/strong\u003e tackles the typical gelcoat yellowing („Tea-Stains“) that comes from salts, organic residue and light metal traces. THE FINISHER HelloWhite AntiGilb carries in active ingredients with strong wetting, chemically loosens the discolouring layer and makes it lift off with water. Because the formula flashes off in a controlled way, you work fast, on target, and without dried-on edges. It suits smooth gelcoat and high-gloss marine-painted panels; keep it off Non-Skid, vinyl, teak and polycarbonate\/acrylic windows so each material keeps the right feel and look.\u003c\/p\u003e\n\u003ch3\u003eOn-board use – waterline, fittings \u0026amp; transom\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUse\u003c\/strong\u003e starts with a clean base: wash the boat in the shade with CleanMarine and rinse with fresh water. Spray HelloWhite onto the wet surface section by section from bottom to top, or apply with a pad, let it dwell 1–3 minutes (don't let it dry), agitate lightly with a soft pad\/brush if needed, then rinse generously with fresh water. Around metal fittings, drain edges and trailer bunks work quickly and take off any excess straight away. After that a short re-wash\/rinse is worth it so the pH is back to neutral – now the surface is ready for WaxPolish or BodyGuard.\u003c\/p\u003e\n\u003ch3\u003eResult, limits \u0026amp; building protection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eResult\u003c\/strong\u003e is a visibly brightened, even white\/light surface with no yellow shadows – ideal „before protection“. Limits: deep oxidation, hard deposits and older, dark-brown waterlines need polishing first (PerfectOne) or local sanding by pros. After HelloWhite, saturate the look with WaxPolish or lock it in hydrophobic with BodyGuard; regular washes with CleanMarine stop it building back up fast. For vinyl upholstery, VinylTexClean\/VinylGuard stays in charge, windows are SeaYou's job – that keeps the care plan cleanly split and repeatable.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „HelloWhite“ — AntiGilb\u003c\/h2\u003e\n\u003ch4\u003eWhich surfaces do I use HelloWhite on?\u003c\/h4\u003e\n\u003cp\u003eOn smooth gelcoat and glossy marine-painted panels at the waterline, bow, transom. Don't use it on Non-Skid, teak, vinyl or plastic windows.\u003c\/p\u003e\n\u003ch4\u003eHow long should it dwell?\u003c\/h4\u003e\n\u003cp\u003e1–3 minutes in the shade. Don't let the product dry; in the heat work shorter and re-mist if needed. Always rinse generously with fresh water afterwards.\u003c\/p\u003e\n\u003ch4\u003eDo I have to neutralise?\u003c\/h4\u003e\n\u003cp\u003eA thorough rinse and a short re-wash with CleanMarine are enough. Rinse cloths\/pads out with fresh water afterwards.\u003c\/p\u003e\n\u003ch4\u003eDoes HelloWhite remove rust spots too?\u003c\/h4\u003e\n\u003cp\u003eLight rust shadows, yes. Deep pitting or rust speckle need a careful polish (e.g. PerfectOne) or specialised treatment depending on the material.\u003c\/p\u003e\n\u003ch4\u003eWhat's the right order?\u003c\/h4\u003e\n\u003cp\u003eWash with CleanMarine → spot-de-yellow with HelloWhite → rinse\/re-wash → WaxPolish (deep gloss) or BodyGuard (hydrophobicity). Treat windows\/vinyl separately.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56304256221519,"sku":"D1-KCX-77110-1L-01","price":43.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77110-1L-01_1.png?v=1778249534"},{"product_id":"koch-chemie-the-finisher-marine-coverguard-textilversiegelung","title":"THE FINISHER \"CoverGuard\" Textile Sealant","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „CoverGuard“ — Textile Sealant for Dry, Low-Stain Boat Textiles\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eHow does CoverGuard help on board? — The breathable marine textile sealant makes upholstery, sprayhoods, biminis \u0026amp; boat covers hydrophobic, slows the penetration of water\/dirt, and significantly facilitates cleaning – invisible to the touch, quickly applied, long-term stable with regular washing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER CoverGuard Textile Sealant\u003c\/strong\u003e reliably protects marine fabrics such as acrylic\/polyester canvas, nylon, blended fabrics, and carpet runners from everyday influences: water beads off, dirt adheres less, and stain formation is reduced. The fiber remains breathable and feels close to its original state – without a greasy film. Optimal after cleaning with VinylTexClean (textile mode) and complete drying. Ideal for sprayhoods, biminis, boat covers, berth covers, seat cushions, and carpet runners in the cockpit and cabin.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydrophobic Protective Film: \u003c\/strong\u003eLiquids bead off, dirt penetrates more slowly – more time to dab away, less edge formation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInvisible \u0026amp; Breathable:\u003c\/strong\u003e Feel and air permeability are maintained; no \"plastic feel,\" no shiny spots with thin application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical \u0026amp; Robust:\u003c\/strong\u003e Facilitates subsequent care, shortens cleaning times, and maintains a clean appearance in everyday use on board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n\u003cstrong\u003eTextile Sealing\u003c\/strong\u003e on Board – Hydrophobicity, Fiber Bonding \u0026amp; Material Understanding\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTextile sealants\u003c\/strong\u003e like CoverGuard anchor themselves in a fine film on the fiber structure: Hydrophobic groups orient themselves outwards, creating beading instead of absorption and thereby reducing the rapid penetration of water and dirt. Because the film remains ultra-thin, breathability changes hardly at all – the fabric still feels \"textile,\" not coated. Especially on acrylic\/polyester canvas of sprayhoods and biminis, this effect prevents rapid \"soaking\" from spray or rain and facilitates subsequent, low-edge drying. On interior textiles, CoverGuard reduces everyday marks like beverage or wet clothing stains, without hardening the feel.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication on Sprayhood, Bimini \u0026amp; Upholstery\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e is successful when the surface is dry, clean, and cool. After cleaning (VinylTexClean in textile mode), allow textiles to dry completely. Mist CoverGuard evenly in a crosshatch pattern in the shade, gently raise the fibers with a soft brush, and thinly re-wet until homogeneous saturation is visible – do not drench. Pay special attention to edges, seams, and high-stress zones. Immediately wipe off overspray on gelcoat\/glass; plastic windows are reserved for SeaYou. Maximum hydrophobicity is achieved after 12–24 hours of drying; do not stress or wet before this time.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eDurability, Aftercare \u0026amp; Care Plan\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDurability\u003c\/strong\u003e depends on sun, salt, and washing frequency. Exposed exterior surfaces (sprayhood\/bimini) naturally require earlier refreshing than cabin textiles. Check the beading level: If no more drops form, clean again, let dry, and thinly reapply CoverGuard. Sensible rhythm: Exterior surfaces every few weeks to quarterly depending on seasonal conditions, interior fabrics less frequently. Regular rinsing\/washing removes salt, prevents buildup, and maintains a uniform appearance. CoverGuard complements – but does not replace – proper drying and ventilation on board.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions about THE FINISHER × Koch-Chemie „CoverGuard“ — Textile Sealant\u003c\/h2\u003e\n\u003ch4\u003eWhat materials is CoverGuard suitable for?\u003c\/h4\u003e\n\u003cp\u003eAcrylic\/polyester canvas (sprayhood, bimini, boat cover), nylon, blended fabrics, carpet runners, and upholstery fabrics. Not for leather, vinyl, non-skid decks, or plastic windows.\u003c\/p\u003e\n\u003ch4\u003eDoes CoverGuard change the feel or breathability?\u003c\/h4\u003e\n\u003cp\u003eWith thin application, the feel remains close to its original state and the fiber breathable. Too much product can make the fabric feel stiffer – therefore, always work in thin layers.\u003c\/p\u003e\n\u003ch4\u003eHow long does the sealant need to dry?\u003c\/h4\u003e\n\u003cp\u003e12–24 hours depending on temperature. During this time, do not stress or wet. Maximum hydrophobicity is shown afterwards.\u003c\/p\u003e\n\u003ch4\u003eCan I use it on windows or vinyl?\u003c\/h4\u003e\n\u003cp\u003eNo. Treat plastic windows with SeaYou, and clean vinyl with VinylTexClean and maintain it with VinylGuard. This ensures the optics and haptics remain material-specific and correct.\u003c\/p\u003e\n\u003ch4\u003eHow often should I refresh it?\u003c\/h4\u003e\n\u003cp\u003eExposed exterior fabrics every few weeks to quarterly depending on salt\/sun, interior fabrics less frequently. The beading test provides guidance: if beading decreases, reapply thinly.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56304325034319,"sku":"D1-KCX-77112-1L-01","price":40.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77112-1L-01_1.png?v=1778249537"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/collections\/the-finisher-excellence-by-koch-chemie-bei-detailing1-kaufen.png?v=1761863872","url":"https:\/\/detailing1.co\/collections\/koch-chemie-the-finisher.oembed?page=3","provider":"Detailing1","version":"1.0","type":"link"}