{"title":"Sitze \u0026 Polster mit THE FINISHER","description":null,"products":[{"product_id":"koch-chemie-the-finisher-automotive-leathertexclean-leder-textilreiniger","title":"THE FINISHER \"LeatherTexClean\" Leather \u0026 Textile Cleaner","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „LeatherTexClean“ — leather \u0026amp; textile cleaner for stain-free seats \u0026amp; panels\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use LeatherTexClean for? — This targeted leather \u0026amp; textile cleaner lifts body oils, denim transfer and drink stains gently from coated leather and fabric, dries off cleanly and sets the perfect base for the care and protection that follows – in the car and on board.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER LeatherTexClean leather \u0026amp; textile cleaner\u003c\/strong\u003e is your precise spot and surface cleaner for seats, side bolsters, door inlays and fabric covers. The balanced surfactant mix lifts oils and pigments in a controlled way, so you pull dirt safely into the cloth instead of smearing it around. In automotive interiors it works colour-stable and residue-free; on the water it removes salt film and sunscreen from fabric and coated leather. As a system block it backs up InsideUp (all-round cleaning) and preps leather perfectly for LeatherLock, and textiles for TexLock\/CoverGuard.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpot-on stain removal:\u003c\/strong\u003e lifts body oils, denim transfer, coffee\/soft drinks and light everyday dirt without changing the feel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGentle \u0026amp; controlled:\u003c\/strong\u003e pH-balanced, fine-pore foam, short flash-off time; ideal for coated leather and tough textiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem fit:\u003c\/strong\u003e perfect prep for LeatherLock (leather care) and TexLock\/CoverGuard (textile protection); noticeably cuts down on re-soiling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eLeather cleaner – coated leather, seams \u0026amp; colour transfer\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLeather cleaners\u003c\/strong\u003e like THE FINISHER LeatherTexClean leather \u0026amp; textile cleaner work with mild, low-solvent surfactants that lift oils and dyes out of the structure without softening the coating. Spray onto the cloth, or for heavier dirt lightly onto the panel, work it into the grain with a soft leather brush and wipe straight off with the fresh microfibre side. With denim transfer you feel your way in small sections; you only step up the pressure once the colour visibly gives. Not suitable for open-pore aniline or nubuck\/suede. After cleaning, let it dry and care for it with LeatherLock so the feel and colour depth stay stable and new dirt has a harder time sticking.\u003c\/p\u003e\n\u003ch3\u003eTextile cleaner – treat seats, carpet \u0026amp; Alcantara with care\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTextile cleaners\u003c\/strong\u003e built on controlled foam like THE FINISHER LeatherTexClean leather \u0026amp; textile cleaner work best after a thorough vacuum. Treat stains from the outside in, let them break up briefly, lift with a textile brush or fibre pad and take them up with a clean, slightly damp cloth. Keep it from over-wetting so you don't get water marks. On Alcantara use a minimal dose only, spray into a corner of the cloth and work fibre-friendly with a very soft brush; then dab dry. Once it's fully dry you finish with TexLock or CoverGuard for a protective, „easy-to-clean“ topcoat – especially worth it on heavily used seats and walk-in zones.\u003c\/p\u003e\n\u003ch3\u003eAutomotive \u0026amp; marine – routine, compatibility \u0026amp; results\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive \u0026amp; marine\u003c\/strong\u003e differ in the load, not the steps: clean → dry → care\/protect. In the car THE FINISHER LeatherTexClean leather \u0026amp; textile cleaner is your step for targeted leather and fabric spots when InsideUp as an all-rounder isn't enough. On the boat you take salt film and sunscreen off fabric and coated leather; large vinyl areas belong with VinylTexClean instead and are conditioned afterwards with VinylGuard. Keep it off hot surfaces and out of direct sun, never let the chemistry dry on and work panel by panel. The result: clean, matte leather with no greasy shine and fresh textiles with no marks – perfectly prepped for long-lasting care and protective layers.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie „LeatherTexClean“ — leather \u0026amp; textile cleaner\u003c\/h2\u003e\n\u003ch4\u003eIs LeatherTexClean suitable for all leather types?\u003c\/h4\u003e\n\u003cp\u003eFor coated\/sealed smooth leather, yes. Please rule out open-pore aniline and nubuck\/suede. Always test in a hidden spot and care for it with LeatherLock after cleaning.\u003c\/p\u003e\n\u003ch4\u003eCan I clean Alcantara with it?\u003c\/h4\u003e\n\u003cp\u003eYes, but very carefully: minimal dose, onto the cloth, move it gently with a soft brush and dab dry. No over-wetting, no rubbing, always run a test patch.\u003c\/p\u003e\n\u003ch4\u003eHow do I remove denim transfer?\u003c\/h4\u003e\n\u003cp\u003eWork small areas: product onto the cloth, lift into the grain with a leather brush, take it off straight away with a clean cloth side. Only step up the pressure if the colour visibly gives; then apply LeatherLock.\u003c\/p\u003e\n\u003ch4\u003eDo I need a wet vac?\u003c\/h4\u003e\n\u003cp\u003eNot for normal stains. For deep textile dirt a wet vac can help pull residue out after you've broken it up. Always wet moderately to avoid water marks.\u003c\/p\u003e\n\u003ch4\u003eIs the product suitable for marine use?\u003c\/h4\u003e\n\u003cp\u003eYes, for fabric and coated leather in the cabin and cockpit. Salt and sunscreen residue lifts off well. Please clean vinyl with VinylTexClean and protect it with VinylGuard.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31\/10\/2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299307532623,"sku":"D1-KCX-77713-500ML-01","price":12.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-leathertexclean-leder-textilreiniger_500ml_77713-500ML-01.png?v=1761908704"},{"product_id":"koch-chemie-the-finisher-automotive-leatherlock-lederpflege","title":"THE FINISHER \"LeatherLock\" Leather Care","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"LeatherLock\" — leather care with a satin-matte OEM finish\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use LeatherLock for? — This leather care conditions coated smooth leather after cleaning, brings back colour depth, keeps the natural feel without that greasy sheen, and makes the surface easier to look after – ideal for seats, the steering wheel rim and door panels.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER LeatherLock leather care\u003c\/strong\u003e is the targeted care step for modern, coated vehicle leather. The fine polymer emulsion lays down evenly, feeds the material visually, cuts down dry-out and keeps that grippy-dry OEM feel. After cleaning with InsideUp or the stain-focused LeatherTexClean, LeatherLock gives you a calm, rich finish with no smearing and no cranked-up gloss – exactly right for contemporary interiors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatin-matte OEM finish\u003c\/strong\u003e: revives colour depth without greasy reflections; the surface stays dry and grippy for seat bolsters and touch areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy care \u0026amp; balanced:\u003c\/strong\u003e the thin-film emulsion conditions evenly and cuts visible dry-out, without clogging up the leather grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-clean: \u003c\/strong\u003eapply to cleaned leather; works hand in hand with InsideUp\/LeatherTexClean as prep and keeps the next interior clean noticeably easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eLeather care – technology, finish \u0026amp; understanding the material\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLeather care\u003c\/strong\u003e on coated smooth leather works when the care does its job in the top layer, not down in the pores. THE FINISHER LeatherLock leather care uses a finely balanced polymer emulsion that forms a thin, even film after a short flash-off. That film smooths the micro-roughness, freshens up the visual saturation and keeps the dry, slip-free feel of modern automotive leather. No grease layer, no gloss build-up: the result looks factory-fresh. The care isn't suited to open-pore aniline or nubuck\/suede – those lack the protective top coat our product is built for. The basis of any care stays clean prep: pull the day-to-day film off with InsideUp, lift pigment and grease stains with LeatherTexClean, and only then condition.\u003c\/p\u003e\n\u003ch3\u003eIn-car application – cleaning, applying, buffing off\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e runs controlled and thin. Get the leather dust-free and clean, then put a few squirts of THE FINISHER LeatherLock leather care onto a soft applicator pad or microfibre cloth. Spread it evenly in small sections, let it flash off for 1–2 minutes, then wipe back gently with a clean side of the cloth until the surface looks calm and streak-free. Seat bolsters, side supports and high-touch zones do better with two very thin passes than one heavy one. Go sparingly on the steering wheel rim to keep the grip; keep it off the pedals, and Alcantara is a no-go. Avoid direct sun and hot surfaces – the care should set, not dry on.\u003c\/p\u003e\n\u003ch3\u003eResult \u0026amp; routine – feel, colour depth, durability\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe result\u003c\/strong\u003e is a rich, satin-matte leather look that feels natural and picks up dirt more slowly. Day to day, wiping fingerprints and dust off with a slightly damp cloth is enough; deeper cleans go easier after the care, because grime grips less well. A sensible routine: clean the interior, treat the specific leather spots with LeatherTexClean, then lay LeatherLock down thin and wipe back. With normal use you re-apply every 6–10 weeks; high-mileage drivers shorten the intervals, show cars can go longer. That keeps the balance of colour depth, grip and easy care steady – with no layer build-up or greasy look.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie \"LeatherLock\" — leather care\u003c\/h2\u003e\n\u003ch4\u003eWhich types of leather is LeatherLock suitable for?\u003c\/h4\u003e\n\u003cp\u003eFor coated\/sealed automotive smooth leather. Not for aniline, nubuck or suede. Test in a hidden spot first and only apply to clean leather.\u003c\/p\u003e\n\u003ch4\u003eDoes the leather end up shiny after care?\u003c\/h4\u003e\n\u003cp\u003eNo. LeatherLock deliberately aims for a satin-matte, OEM-like finish with a dry, grippy feel – no greasy film.\u003c\/p\u003e\n\u003ch4\u003eHow often should I apply it?\u003c\/h4\u003e\n\u003cp\u003eDepending on use, every 6–10 weeks. Sooner on heavily used seat bolsters, less often on garage\/show cars.\u003c\/p\u003e\n\u003ch4\u003eCan LeatherLock \"repair\" cracks or wear?\u003c\/h4\u003e\n\u003cp\u003eNo. It cares for and stabilises the look, but doesn't fix structural damage. Cracks need professional restoration\/leather repair.\u003c\/p\u003e\n\u003ch4\u003eHow do I prep best?\u003c\/h4\u003e\n\u003cp\u003eFirst InsideUp for the day-to-day film, and LeatherTexClean for denim transfer or grease. Then lay LeatherLock down very thin and buff it off cleanly.\u003c\/p\u003e\n  \u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299438735695,"sku":"D1-KCX-77719-500ML-01","price":13.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-leatherlock-lederpflege_500ml_77719-500ML-01.png?v=1761909465"},{"product_id":"koch-chemie-the-finisher-automotive-texlock-textilversiegelung","title":"THE FINISHER \"TexLock\" fabric sealant","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie “TexLock” — fabric sealant against stains \u0026amp; re-soiling\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat does TexLock do in the car? — The breathable fabric sealant impregnates seat covers, carpets and boot felt so they turn hydrophobic, cuts down re-soiling, makes stains easier to lift and keeps the original feel – invisible, breathable, ideal after a thorough interior clean.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER TexLock fabric sealant\u003c\/strong\u003e protects hard-worked automotive textiles for everyday use: liquids bead off, dirt struggles to grab hold, and the fibre stays grippy and breathable. The formula bonds into the fibre structure without a silicone film or that greasy sheen. Perfect after cleaning with InsideUp or spot-treating with LeatherTexClean – especially on seat faces, floor mats, carpet and boot felt. The result: more time to dab up spills, fewer tide marks, and follow-up care that's far easier.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydrophobic protection:\u003c\/strong\u003e liquids bead off and stains soak in more slowly; spot-on for everyday moments like coffee, soft drinks, wet clothes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInvisible \u0026amp; breathable:\u003c\/strong\u003e no “plastic feel”, the original look and grip stay put; the fibre can keep “breathing”.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for daily life: \u003c\/strong\u003emakes dust and dirt easier to lift, cuts tide marks and steadies your cleaning intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFabric sealant – how it works \u0026amp; bonds to the fibre\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003efabric sealant\u003c\/strong\u003e like THE FINISHER TexLock fabric sealant works through a fine-film, chemical bond to the fibre structure. The hydrophobic groups point outward, so water and water-based stains form beads instead of soaking in. Because the film is ultra-thin, the fibre stays flexible and breathable – the feel doesn't change, the look stays factory-fresh. That helps against everyday triggers like coffee, rainwater, salt marks from winter damp or wet sports kit on the seat.\u003c\/p\u003e\n\u003ch3\u003eApplying it on seats, carpet \u0026amp; boot\u003c\/h3\u003e\n\u003cp\u003eYou get the best \u003cstrong\u003eapplication\u003c\/strong\u003e when the base is clean and dry. After prepping with InsideUp or spot-cleaning with LeatherTexClean, let the textiles dry fully, then mist THE FINISHER TexLock fabric sealant on evenly in a cross pattern, lift the fibres with a soft brush and mist a thin coat again. Don't soak it – feather the edges out cleanly. Let it dry 12–24 hours and only put it back to use after that. Keep it off seat belts, headliner and airbag zones; on Alcantara go easy on the dose and always run a test patch first.\u003c\/p\u003e\n\u003ch3\u003eDurability, upkeep \u0026amp; compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDurability\u003c\/strong\u003e comes down to use and cleaning. Floor mats and seat bolsters take more of a beating than boot felt – there you might build up two thin coats. For upkeep, clean the textiles gently, let them dry fully and lay down a thin refresh when the beading starts to fade. THE FINISHER TexLock fabric sealant is invisible, plays nicely with common interior cleaners and won't upset sensors or seat heating. Don't seal leather, vinyl or plastics, though – LeatherLock or InsideCare\/VinylGuard are there for those.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie “TexLock” — fabric sealant\u003c\/h2\u003e\n\u003ch4\u003eWhich surfaces do I use TexLock on?\u003c\/h4\u003e\n\u003cp\u003eOn automotive textiles like seat covers, floor mats, carpets and boot felt. Not for leather, vinyl, plastics, headliner or seat belts.\u003c\/p\u003e\n\u003ch4\u003eDoes TexLock change the feel?\u003c\/h4\u003e\n\u003cp\u003eNo. The sealant stays ultra-thin and breathable – grip and look stay factory-fresh, with no rustly or “plasticky” feel.\u003c\/p\u003e\n\u003ch4\u003eHow long does TexLock need to dry?\u003c\/h4\u003e\n\u003cp\u003eDepending on temperature, 12–24 hours. Don't use or soak it in that time. You only get full beading once it's fully dry.\u003c\/p\u003e\n\u003ch4\u003eDoes TexLock help against salt and winter marks?\u003c\/h4\u003e\n\u003cp\u003eIt slows the soak-in and makes low-stain cleaning easier. Marks can still form, but they come off more easily and come back less often.\u003c\/p\u003e\n\u003ch4\u003eHow often should I refresh it?\u003c\/h4\u003e\n\u003cp\u003eEvery 3–6 months depending on wear. High-use zones (floor mats, driver's seat) sooner, boot felt later.\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"500ml","offer_id":56299495424335,"sku":"D1-KCX-77722-500ML-01","price":29.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-texlock-textilversiegelung_500ml_77722-500ML-01.png?v=1761909668"}],"url":"https:\/\/detailing1.co\/collections\/the-finisher-bauteil-sitze.oembed","provider":"Detailing1","version":"1.0","type":"link"}