{"title":"Foam Sprayer","description":"","products":[{"product_id":"koch-chemie-foamer-bottle-schaumspender-150ml","title":"Foamer Bottle","description":"\u003ch2 id=\"speakable-headline\"\u003eLay concentrated interior cleaners down as a dry, dosed foam\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Foamer Bottle? A 150 ml pump bottle with a dilution scale up to 1:10 that turns cleaner concentrates into a dry, high-volume foam — spot-on for upholstery, leather and Alcantara. Not for strong acidic wheel cleaners, bug removers, solvents or ready-to-use cleaners, since the bottle is built for concentrates you dilute yourself.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eThe Koch-Chemie Foamer Bottle\u003c\/strong\u003e (Koch Chemie Foamer Bottle) is a foam dispenser from Koch-Chemie that turns concentrated cleaners into a dry, lamella-rich foam via a built-in mixing chamber and a pump head. The active stays on the fibre longer, because the cleaning solution doesn't flood the surface like a spray — it sits there as a fine-pored foam and works the substrate layer by layer instead of soaking it through.\u003c\/p\u003e\n\n\u003cp\u003eThe side of the bottle has a volume and dilution scale printed on it, marking ratios from 1:1 to 1:10 clearly. You fill water up to the dilution mark you want first, then add the concentrate — not the other way round, or the cleaner foams up while you're filling and you lose volume. That order is the most common mistake we see day-to-day, and the reason some detailers report foam-density problems.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScale 1:1 to 1:10 on the bottle.\u003c\/strong\u003e 150 ml of concentrate at 1:10 gives you about 1.65 litres of ready-to-use cleaning solution — on a typical interior job with COLOURLOCK Pol Star concentrate that's enough for four to five complete cars. No measuring cup or syringe to carry around, and the dilution is repeatable every time you refill.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDry foam instead of a wet spray.\u003c\/strong\u003e The pump head makes a fine-pored foam that clings vertically to seat bolsters and door cards without seeping through. On upholstery and Alcantara that means the active stays in the dirt instead of in the foam core, and the brush works cleaner because it doesn't have to push through a layer of water.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDosed product use.\u003c\/strong\u003e One fill of the Foamer Bottle covers the full interior detail of a mid-size car (seats, carpet, headliner, door cards, centre console) — using 80 to 120 ml of diluted solution. Compared with spraying straight from a 1-litre bottle, that cuts cleaner use by about two thirds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-foamer-bottle-schaumspender-150ml_hero.jpg?v=1777826972\" alt=\"Water being poured into the Koch-Chemie Foamer Bottle, Pol Star concentrate next to it, Porsche 911 Turbo S in the background\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The most common reason a pump mechanism fails isn't a defect — it's dried-out cleaner concentrate sitting in the pump chamber. After every cleaning session, empty the bottle, refill with clean tap water and pump 8 to 10 strokes dry until only water comes out. Those 60 seconds of care add a lot to the life of the Foamer Bottle — a pump that dries out with cleaner residue jams the return spring and then has to be pushed back by hand.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWater first, concentrate after, read the scale\u003c\/h3\u003e\n\u003cp\u003eUnscrew the pump head, fill the bottle with lukewarm tap water up to the dilution mark you want, and only then top up with the concentrate — say COLOURLOCK Pol Star or the all-purpose cleaner \"Mzr\" — to the 100-percent mark. Put the pump head back on, tip the bottle two or three times rather than shaking it so no premature foam climbs into the pump chamber, and prime three to four strokes until stable foam comes out.\u003c\/p\u003e\n\n\u003cp\u003eWhat matters is keeping concentrate and ready-to-use apart: the classic Pol Star \"Po\" 1L comes ready to go in the spray bottle and is NOT to be diluted — that one goes straight onto the upholstery. The Foamer Bottle is meant for the concentrate line (COLOURLOCK Pol Star, Green Star \"Gs\", all-purpose cleaner \"Mzr\"), which you couldn't use at all without diluting because it's dosed too strong.\u003c\/p\u003e\n\n\u003cp\u003eThen wipe down with a damp microfibre cloth in one direction — never back and forth, or the dirt you've lifted works its way back into the weave. On heavily soiled seat bolsters or the top edges of backrests, a second pass with less foam beats a longer dwell time on the first pass, because the foam lamellae start to collapse after 90 seconds and the active stops working.\u003c\/p\u003e\n\n\u003cp\u003eThe dilution matrix for the most common jobs looks like this:\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eConcentrate\u003c\/th\u003e\n\u003cth\u003eDilution\u003c\/th\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003cth\u003eDwell time\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCOLOURLOCK Pol Star\u003c\/td\u003e\n\u003ctd\u003e1:10\u003c\/td\u003e\n\u003ctd\u003eUpholstery, Alcantara, cloth seats\u003c\/td\u003e\n\u003ctd\u003e1–2 min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCOLOURLOCK Pol Star\u003c\/td\u003e\n\u003ctd\u003e1:5\u003c\/td\u003e\n\u003ctd\u003eSmooth leather, moderate soiling\u003c\/td\u003e\n\u003ctd\u003e1 min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAll-purpose cleaner Mzr\u003c\/td\u003e\n\u003ctd\u003e1:5\u003c\/td\u003e\n\u003ctd\u003eCockpit, plastic door cards\u003c\/td\u003e\n\u003ctd\u003e30 sec\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGreen Star Gs\u003c\/td\u003e\n\u003ctd\u003e1:10\u003c\/td\u003e\n\u003ctd\u003eGeneral interior surfaces\u003c\/td\u003e\n\u003ctd\u003e1 min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAll-purpose cleaner Mzr\u003c\/td\u003e\n\u003ctd\u003e1:10\u003c\/td\u003e\n\u003ctd\u003eHeadliner, cloth roof lining\u003c\/td\u003e\n\u003ctd\u003e30 sec\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-foamer-bottle-schaumspender-150ml_anwendung.jpg?v=1777826972\" alt=\"Bubbly foam from the Koch-Chemie Foamer Bottle being pumped onto a black leather sample in the Detailing1 warehouse\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003ch3\u003eNot for acidic cleaners, and no snow-foam-cannon volumes\u003c\/h3\u003e\n\u003cp\u003eThe Foamer Bottle covers the mid dilution range for interior chemistry — it's not a one-tool-does-everything replacement for other application gear. Strong acidic wheel cleaners, acidic bug removers and solvent-based tar removers don't belong in the dispenser, because the polypropylene seals and the stainless return spring take damage within a few uses at pH below 4 or with aromatic solvents.\u003c\/p\u003e\n\n\u003cp\u003eReady-to-use interior cleaners like the classic Pol Star \"Po\" 1L or Top Star \"Ts\" don't belong decanted into the Foamer Bottle either — those are set to the right concentration from the factory and would only take a pointless detour through the dispenser instead of coming straight out of the spray bottle. The Foamer Bottle is a dilution and foaming tool, not a decanting container.\u003c\/p\u003e\n\n\u003cp\u003eFor an exterior wash the 150 ml fill is simply too small and the spray radius too tight — foaming a whole body with the pump bottle takes half an hour and tires your hand out. If you want to foam paint, that's a job for a snow-foam cannon on the pressure washer, or at least a 1-litre pump sprayer with a foam nozzle.\u003c\/p\u003e\n\n\u003cp\u003ePinpoint work on interior surfaces → Foamer Bottle. Wide-area body pre-wash → snow-foam cannon or \u003ca href=\"\/en\/collections\/snow-foam\"\u003esnow foam cleaner\u003c\/a\u003e off the pressure washer. The second limit comes from day-to-day use: the pump head has a limited stroke volume, and after 200 to 300 strokes with undiluted concentrate the spring force drops off. Diluting here isn't optional — it's the technical condition for a long life.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-foamer-bottle-schaumspender-150ml_detail.jpg?v=1777826972\" alt=\"Koch-Chemie Foamer Bottle 150 ml with dilution scale 1:1 to 1:5 next to Koch-Chemie Pol Star concentrate in the Detailing1 warehouse\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003ch3\u003eFor targeted interior work, not for the whole wash\u003c\/h3\u003e\n\u003cp\u003eThe Foamer Bottle is the right call for anyone who regularly does interior detail with concentrate cleaners — your own cars, small detailing setups, commercial detailers who specialise in upholstery. If you've already got COLOURLOCK Pol Star or the all-purpose cleaner on the shelf, the dispenser is the obvious way to lay it down.\u003c\/p\u003e\n\n\u003cp\u003eIt's a worse fit if you only do a rough interior clean once or twice a year — then the spray mist straight from the original bottle of a ready-to-use cleaner is enough, and you skip the pump as a wear part entirely. In pure high-throughput commercial work too, where ten to fifteen interiors get done a day, it's worth investing in a Tornador foam attachment that runs on compressed air — that makes more foam per second and takes the load off your hand in continuous use.\u003c\/p\u003e\n\n\u003cp\u003eThe full interior detailing set pairs the Foamer Bottle with three parts: a concentrate as the chemical side, a medium-firm \u003ca href=\"\/en\/collections\/buersten\"\u003eupholstery brush\u003c\/a\u003e for the mechanical side, and a microfibre cloth to pick it all up. For the concentrate, the \u003ca href=\"\/en\/products\/koch-chemie-colourlock-pol-star-reinigerkonzentrat-textil-leder-alcantara\"\u003eCOLOURLOCK Pol Star cleaner concentrate\u003c\/a\u003e in the 1-litre bottle is the one to grab — diluted it gives you several seasons of interior cleaning and it's tuned for upholstery, leather and Alcantara.\u003c\/p\u003e\n\n\u003cp\u003eThe unit price of 5.99 EUR sits below the typical consumable cost of a single interior detail — economically the accessory pays for itself from the third job on, because concentrate use runs about two thirds lower than spraying straight from a standard bottle. At ten interior sessions a year the Foamer Bottle pays for itself in the first month. This isn't a premium tool, it's a consumable — and that's exactly the category where it works best.\u003c\/p\u003e\n\n\u003cp\u003eThe one trick the maker doesn't write down: after every cleaning session, flush the pump through with clean water and leave the bottle open to dry out. Those 60 seconds of care turn the 5.99 EUR wear part into a tool that easily lasts two or three seasons — and that's exactly where the negative reviews fall down, hitting the missing care rather than the product.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-foamer-bottle-schaumspender-150ml_workflow.jpg?v=1777826972\" alt=\"Application set with Koch-Chemie Foamer Bottle, Pol Star concentrate, upholstery brush and microfibre cloth on a stainless-steel workbench\" loading=\"lazy\" width=\"1200\"\u003e\n","brand":"Koch-Chemie","offers":[{"title":"150ml","offer_id":48867490890063,"sku":"D1-KCX-9998145","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/9998145__1715052916.png?v=1715112378"},{"product_id":"bigboi-foamr-18-elektrischer-akku-schaumsprueher","title":"FoamR 18 Electric battery-powered foam sprayer","description":"\u003ch2\u003e Do you already know the electric battery-operated foam sprayer Bigboi FoamR 18?\u003c\/h2\u003e\n\n \u003cp\u003eThe Bigboi FoamR 18 is a revolutionary, electric battery-powered foam sprayer that takes car washing and vehicle care to a new level. With the latest lithium-ion battery technology, the FoamR 18 automatically builds up pressure that produces lush, thick foam within seconds - without any manual pumping. Whether for cleaning cars, wheels, windows, applying tint films or for watercraft - this foam sprayer makes cleaning more efficient and more pleasant.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePowerful battery:\u003c\/strong\u003e Thanks to a 2500 mAh lithium-ion battery, the FoamR 18 offers a running time of 60 minutes per charge.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eQuick-change nozzles:\u003c\/strong\u003e Quickly switch from foam generation to a spray function with a simple nozzle adjustment.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eConvenient handling:\u003c\/strong\u003e Manual pumping and the associated effort are a thing of the past. The FoamR 18 is self-priming and does not require any manual pumping.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n \u003ch3\u003eInnovative design and easy operation\u003c\/h3\u003e\n\n\u003cp\u003e The Bigboi FoamR 18 not only impresses with its technical features, but also with its user-friendly design. A generous capacity of 1.8 liters allows for more extensive cleaning work without constant refilling. The integrated LED charging indicator always shows how much operating time is left, and the USB charging cable makes charging easy.\u003c\/p\u003e\n\n\u003ch3\u003e Versatility and efficiency\u003c\/h3\u003e\n\n\u003cp\u003e Thanks to its versatile application possibilities, the FoamR 18 proves to be an indispensable tool not only for car enthusiasts. The transition from foaming to spraying is made by simply changing the nozzles, which allows flexible adaptation to different cleaning needs.\u003c\/p\u003e\n\n\u003ch3\u003e Comfort and durability\u003c\/h3\u003e\n\n \u003cp\u003eWith a charging time of just 2.4 hours via a 5V 2A adapter (or 5.5 hours via a 5V 1A adapter), the FoamR 18 is quickly ready for use. The simple operation and robust construction guarantee a long service life and high reliability.\u003c\/p\u003e","brand":"bigboi","offers":[{"title":"1800ml","offer_id":48869306499407,"sku":"D1-BIB-FOAMR18","price":99.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/FoamR18-01.jpg?v=1715164732"},{"product_id":"ik-sprayers-pumpschaumsprueher-ik-foam-pro-2","title":"\"iK Foam\" Pro 2 Pump Foam Sprayer (incl. colour coding)","description":"\u003ch2\u003e \u003cstrong\u003eiK Sprayers \"iK Foam\" Pro 2 – Pump Foam Sprayer\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 2\u003c\/strong\u003e pump foam sprayer is a pro tool for laying down dry, long-lasting foam. Built for surfactant-based chemistry, it kicks out a thick, clingy foam that stays put — ideal for cleaning, sanitary and disinfection jobs. A perfect match for car washing and any other pro use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks hard:\u003c\/strong\u003e Lays down thick foam that does the heavy lifting for you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomic build:\u003c\/strong\u003e Wide fill opening and a safety valve for easy handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile:\u003c\/strong\u003e At home across trades, from car care to disinfection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAn ergonomic build made for pro use\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 2\u003c\/strong\u003e pump foam sprayer is built for daily pro work. The wide fill opening and ergonomic shape make it easy to live with. The safety valve is set to 3 bar so you can bleed off pressure safely, and the solid base keeps it standing steady while you work.\u003c\/p\u003e\n\u003ch3\u003eVersatile and adaptable\u003c\/h3\u003e\n\u003cp\u003eThis foam sprayer gives you three foam settings: light, medium and heavy. The coloured caps make it easy to tell at a glance what's in the tank. That flexibility makes it a great fit for cars, bikes and food processing alike.\u003c\/p\u003e\n\u003ch3\u003eEasy to maintain and handle\u003c\/h3\u003e\n\u003cp\u003eTool-free assembly and teardown make servicing the \u003cstrong\u003eiK Foam Pro 2\u003c\/strong\u003e a breeze. The clear housing lets you keep an eye on the fill level at all times, so you keep moving without guesswork.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"1.25 liters","offer_id":49337288819023,"sku":"D1-IKS-81676","price":30.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-pumpschaumsprueher-ik-foam-pro-2.png?v=1721418619"},{"product_id":"ik-sprayers-pumpschaumsprueher-ik-foam-15","title":"\"iK Foam\" 1.5 Pump Foamer","description":"\u003ch2\u003eiK Sprayers \"iK Foam\" 1.5 Pump Foam Sprayer\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam 1.5 pump foam sprayer\u003c\/strong\u003e is a professional spraying device, developed to generate dry and durable foam. It is ideal for car washing, bicycle cleaning, and many other cleaning and disinfection applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Foam Quality:\u003c\/strong\u003e Ensures dense, consistent foam.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Application:\u003c\/strong\u003e Suitable for various chemical substances with surfactant properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Handling:\u003c\/strong\u003e Ergonomic design with large filling openings and a transparent container for level indication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eEasy Operation and Ergonomics\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam 1.5\u003c\/strong\u003e impresses with its user-friendly handling. With its large filling opening and ergonomic design, it allows for easy filling and comfortable use. The transparent container allows for easy checking of the fill level, which further simplifies operation.\u003c\/p\u003e\n\u003ch3\u003eVersatile Application Possibilities\u003c\/h3\u003e\n\u003cp\u003eThanks to its high foam quality, the \u003cstrong\u003eiK Foam 1.5\u003c\/strong\u003e is ideal for a wide range of applications, whether it's car washing, bicycle cleaning, or disinfecting food processing areas. It is perfect for professional cleaning, as the foam adheres for a long time and cleans thoroughly.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data and Features\u003c\/h3\u003e\n\u003cp\u003eEquipped with a safety valve set at 3 bar, the \u003cstrong\u003eiK Foam 1.5\u003c\/strong\u003e offers additional safety. The adjustable conical nozzle allows the foam to be precisely adapted to requirements. The usable capacity of 0.75 liters is sufficient for extensive cleaning tasks without constant refilling.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"0.75 liters","offer_id":49337399837007,"sku":"D1-IKS-81776","price":26.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-pumpschaumsprueher-ik-foam-15.png?v=1721419408"},{"product_id":"ik-sprayers-ik-foam-pro-2-plus-pumpschaumsprueher-kompressorventil","title":"\"iK Foam\" Pro 2+ (Plus) Pump Foam Sprayer with Compressor Valve (incl. Colour Coding)","description":"\u003ch2\u003eiK Sprayers \"iK Foam\" Pro 2+ (Plus) Pump Foam Sprayer with Compressor Valve\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 2+ pump foam sprayer\u003c\/strong\u003e is the tool you reach for when cleaning and disinfecting jobs need to go fast and clean. With its clear tank, universal compressor valve and ergonomic build, this foam sprayer is easy to live with and gets the job done.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick, lasting foam:\u003c\/strong\u003e lays down dense foam that clings, cutting your cleaning time and pulling more dirt out per pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo ways to pressurise:\u003c\/strong\u003e pump it by hand or hook it up to a compressor — your call, whatever the job needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy upkeep:\u003c\/strong\u003e tool-free assembly and teardown, so cleaning and servicing take seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eTop-tier foam for professional cleaning\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 2+\u003c\/strong\u003e is a versatile bit of kit built for pro-level cleaning and disinfection. The compressor valve lets you build pressure fast and without fuss, which makes the whole thing far less of a chore. It is right at home on vehicles, industrial plant and HVAC systems.\u003c\/p\u003e\n\u003ch3\u003eEasy to use, easy to run\u003c\/h3\u003e\n\u003cp\u003eThe ergonomic shape of the \u003cstrong\u003eiK Foam Pro 2+\u003c\/strong\u003e sits well in the hand all day. The wide fill opening and the clear tank with level marking make topping up and keeping an eye on the contents a no-brainer. The colour-coded caps add to that — one glance tells you what is in the tank.\u003c\/p\u003e\n\u003ch3\u003eFoam, your way\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 2+\u003c\/strong\u003e ships with three mixing nozzles, so you can tune the foam to the job in front of you. Dry, medium or wet foam — you dial in the cleaning power and stretch the dwell time between product and surface, without soaking everything in the process.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"1.25 liters","offer_id":49396093485391,"sku":"D1-IKS-81678","price":36.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-foam-pro-2-plus-pumpschaumsprueher-kompressorventil.png?v=1722524699"},{"product_id":"ik-sprayers-ik-foam-pro-12-pumpschaumsprueher-kompressorventil-inkl-farbenkennzeichnung","title":"\"iK Foam\" Pro 12 pump foam sprayer with compressor valve","description":"\u003ch2\u003eiK Sprayers \"iK Foam\" Pro 12 — pump foam sprayer with compressor valve\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 12 pump foam sprayer\u003c\/strong\u003e is a heavy-duty unit built specifically to lay down dry, long-lasting foam. It handles a wide range of cleaning jobs in car care, disinfection and general cleaning. With its tough build and a pile of practical features, it's the right tool for pros who use it day in, day out.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDense, long-lasting foam\u003c\/strong\u003e: the sprayer puts out a thick, clinging foam that's spot on for cleaning and disinfection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks on plenty\u003c\/strong\u003e: good for cleaning vehicles, HVAC systems, bikes and industrial kitchens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to run and maintain\u003c\/strong\u003e: a clear tank, a big funnel and a park slot for the lance after use keep it dead simple to handle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eStrong cleaning performance\u003c\/h3\u003e\n\u003cp\u003eThanks to the way it builds foam, the \u003cstrong\u003eiK Foam Pro 12\u003c\/strong\u003e keeps your cleaner sitting on the surface longer. You get a deeper clean without soaking everything, which keeps mould and bacteria from taking hold. Swap in different mixers and you can pick light, medium or strong foam to dial in each job.\u003c\/p\u003e\n\u003ch3\u003eTough, well thought-out build\u003c\/h3\u003e\n\u003cp\u003eWith a 10-litre tank and a pressure valve set to 3.5 bar, the \u003cstrong\u003eiK Foam Pro 12\u003c\/strong\u003e gives you plenty of capacity and a safe working pressure. The built-in compressed-air connector makes pressurising easy, while the rugged fibreglass lance and the solid base keep it standing and going for the long haul.\u003c\/p\u003e\n\u003ch3\u003eLoads of uses\u003c\/h3\u003e\n\u003cp\u003eWhether it's car detailing, cleaning processing areas in the food trade or disinfecting public spaces, the \u003cstrong\u003eiK Foam Pro 12\u003c\/strong\u003e earns its keep. The clear tank and the spot to stow the lance safely after use mean top comfort and efficiency for pros.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"6 liters","offer_id":49396133265743,"sku":"D1-IKS-82676","price":134.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-foam-pro-12-pumpschaumsprueher-kompressorventil-inkl-farbenkennzeichnung.png?v=1722524041"},{"product_id":"ik-sprayers-ik-e-foam-pro-12-elektrischer-pumpschaumsprueher-inkl-kompressor","title":"\"iK e Foam\" Pro 12 Electric Pump Foam Sprayer (compressor included)","description":"\u003ch2\u003e\u003cstrong\u003eiK Sprayers \"iK e Foam Pro 12\" — Electric Pump Foam Sprayer (compressor included)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK e Foam Pro 12\u003c\/strong\u003e is a high-quality electric pump foam sprayer built to lay down dry, long-lasting foam. It's a natural fit for professional cleaning across a range of jobs — vehicle care, cleaning HVAC systems and disinfection work. The\u003cstrong\u003e iK e Foam Pro 12\u003c\/strong\u003e is built tough and runs reliably shift after shift. The 18V lithium-ion battery makes it easy and efficient to handle. With a total capacity of 10 litres and a usable capacity of 6 litres, it has the reach for bigger cleaning jobs too. The built-in compressor and the different foam mixers let you dial in the type of foam — dry, intermediate or wet — to suit the task. And because the tank is transparent, you always know how much you've got left.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile foam output:\u003c\/strong\u003e three different foam mixers let you adjust the foam type (dry, intermediate, wet) for different cleaning needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to handle:\u003c\/strong\u003e the 18V lithium-ion battery and built-in compressor make it light work to run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh capacity:\u003c\/strong\u003e with a usable capacity of 6 litres, it's up to large cleaning jobs as well.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVersatile across the board\u003c\/h3\u003e\n\u003cp\u003eThe iK e Foam Pro 12 is ideal for professional cleaning in all sorts of sectors — vehicle care, industrial maintenance and building disinfection. Thanks to the different foam mixers, you can set the sprayer up for a wide range of cleaning needs.\u003c\/p\u003e\n\u003ch3\u003eBuilt tough, built to last\u003c\/h3\u003e\n\u003cp\u003eThis electric foam sprayer is made from high-grade materials known for standing up to harsh chemicals. The transparent tank makes it easy to keep an eye on the fill level, and the safety valves keep the job safe.\u003c\/p\u003e\n\u003ch3\u003eEasy to service and run\u003c\/h3\u003e\n\u003cp\u003eThe iK e Foam Pro 12 comes apart and goes back together easily, so you can service it without any tools. The battery and compressor are simple to handle and deliver steady performance throughout the job.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"6 liters","offer_id":49396171342159,"sku":"D1-IKS-82678","price":294.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-e-foam-pro-12-elektrischer-pumpschaumspreuher-inkl-kompressor.png?v=1722460778"},{"product_id":"ik-sprayers-ik-e-foam-pro-2-elektrischer-akku-schaumsprueher","title":"\"iK e Foam\" Pro 2 Electric Battery Foam Sprayer (built-in battery compressor)","description":"\u003ch2\u003eElectric Battery Foam Sprayer by iK Sprayers \"iK e Foam\" Pro 2 \u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Sprayers \"iK e Foam\" Pro 2\u003c\/strong\u003e is an advanced electric foam sprayer built around what car-care enthusiasts actually need. With a strong 7.4V 3200 mAh battery and a built-in compressor, it lays down cleaning foam smoothly and consistently – no more pumping every few minutes! The solid build, the 2-3 bar working pressure and the simple handling make the iK e Foam Pro 2 a must-have for any detailer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in battery compressor\u003c\/strong\u003e: no manual pumping – steady pressure and proper foam.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible foam output\u003c\/strong\u003e: three swappable foam nozzles to dial in the result you want.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last\u003c\/strong\u003e: quality materials and safety features for a long working life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eStrong battery for longer sessions\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK e Foam Pro 2\u003c\/strong\u003e stands out for its powerful battery, which keeps you going without breaks. On a single charge you can spray up to 8-10 tanks, so even big vehicles get cleaned efficiently. The \u003cstrong\u003ebuilt-in compressor\u003c\/strong\u003e holds a steady pressure that keeps the foam quality high. The sprayer runs at \u003cstrong\u003e2-3 bar\u003c\/strong\u003e, which gives you an even foam blanket that pulls dirt and grime off the surface. \u003cmeta charset=\"utf-8\"\u003eThe LED tells you the current charge at a glance: \u003cstrong\u003egreen\u003c\/strong\u003e (60-100%), \u003cstrong\u003eyellow\u003c\/strong\u003e (30-60%) and \u003cstrong\u003ered\u003c\/strong\u003e (0-30%), so you always know how much runtime you have left.\u003c\/p\u003e\n\u003ch3\u003eProper foam for professional results\u003c\/h3\u003e\n\u003cp\u003eWith the \u003cstrong\u003eiK e Foam Pro 2\u003c\/strong\u003e you get the kind of foam results you normally only see from pro detailers. The \u003cstrong\u003ethree included foam nozzles\u003c\/strong\u003e (orange, grey and green) let you set the foam exactly how you need it. Wet, medium or dry foam – the iK e Foam Pro 2 follows your lead and lets the cleaning foam dwell and work deep into the dirt. The \u003cstrong\u003eclear 1.5-litre tank\u003c\/strong\u003e also keeps the fill level in sight, so you never run dry without warning.\u003c\/p\u003e\n\u003ch3\u003eEasy to use, works just about anywhere\u003c\/h3\u003e\n\u003cp\u003eUsing the \u003cstrong\u003eiK e Foam Pro 2\u003c\/strong\u003e couldn't be simpler, which makes it the ideal tool for anyone who loves detailing. It's ready to go in seconds, and the rechargeable battery means cordless, flexible use. Its \u003cstrong\u003eergonomic design\u003c\/strong\u003e sits comfortably in the hand, even on longer jobs. A real highlight is the \u003cstrong\u003esafety lock\u003c\/strong\u003e that stops accidental triggering. The battery charges quickly and easily over the \u003cstrong\u003eUSB-C port\u003c\/strong\u003e. And if electric operation isn't an option for once, you can also run the sprayer \u003cstrong\u003emanually\u003c\/strong\u003e to stay fully in control of the pressure. Wheels, bodywork or engine bay – the iK e Foam Pro 2 is the perfect battery foam sprayer for a thorough yet gentle clean.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"1.5 liters","offer_id":49674020749647,"sku":"D1-IKS-81682","price":95.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-e-foam-pro-2-elektrischer-schaumsprueher_1500ml.png?v=1726470933"},{"product_id":"ik-sprayers-ik-foam-pro-2-alk-schaumsprueher-alkalisch","title":"\"iK Foam\" Pro 2 Alk Foam Sprayer (Alkaline)","description":"\u003ch2\u003eAlkaline foam at pro level: iK Sprayers \"iK Foam\" Pro 2 Alk foam sprayer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe iK Sprayers iK Foam Pro 2 Alk is a professional foam sprayer with EPDM seals, built specifically for strongly alkaline foam cleaners, and it lets you lay down a controlled, even, material-safe layer of foam in detailing work.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eiK Sprayers iK Foam Pro 2 Alk\u003c\/strong\u003e is the no-compromise answer to one of the biggest questions in modern detailing: how do you get strongly alkaline foam cleaners onto the car safely, evenly and under control? Where standard foam sprayers hit their limits fast with aggressive chemistry, the Foam Pro 2 Alk is built for exactly that. EPDM seals, a solid pressure system and real foaming make it the tool of choice for proper pre-wash and heavy-duty cleaning.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal foaming for alkalis:\u003c\/strong\u003e made for alkaline snow foams and pre-cleaners with serious cleaning power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPDM seals:\u003c\/strong\u003e chemically resistant to strongly alkaline products and far longer-lasting than standard seals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled foam coverage:\u003c\/strong\u003e an even blanket of foam instead of stray mist or drips.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ealkaline foam sprayer for proper pre-wash and heavy-duty jobs\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003ealkaline foam sprayer\u003c\/strong\u003e iK Foam Pro 2 Alk was built specifically for high-pH cleaning chemistry. Alkaline snow foams and pre-cleaners need more than chemical resistance — they need a system that works the foam properly. The Foam Pro 2 Alk lays down a dense, clinging foam that stays put on the panel and gives the cleaner time to dissolve the dirt. In the pre-wash that's exactly what counts: it pulls dirt loose and cuts the risk of wash marks later in the process.\u003c\/p\u003e\n\u003ch3\u003eEPDM seals, foam structure and controlled application\u003c\/h3\u003e\n\u003cp\u003eAt the heart of the iK Foam Pro 2 Alk are its EPDM seals paired with the proven IK foaming system. EPDM is made for alkaline media, so the valves, piston and sealing faces keep working reliably even with regular use of aggressive chemistry. Day-to-day that means steady pressure and consistent foam quality. The foam goes on evenly, doesn't run off straight away and lets you place it where you want — on paint, wheels, plastics or in the engine bay.\u003c\/p\u003e\n\u003ch3\u003eClean results, durability and a clear gap to standard foamers\u003c\/h3\u003e\n\u003cp\u003eThe difference between the iK Foam Pro 2 Alk and run-of-the-mill foam sprayers shows up most in daily use. Where standard foamers lose their seal and their performance fast with alkaline products, the Foam Pro 2 Alk stays tight and dependable. That gets you not just consistent cleaning but a leaner use of chemistry too. For pro detailers it means less downtime, fewer spare units and a foam system that keeps working at pro level — exactly what we expect in high-end detailing.\u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"1.25 liters","offer_id":56928774586703,"sku":"D1-IKS-81686","price":34.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-foam-pro-2-alk-schaumsprueher-alkalisch.png?v=1769731446"},{"product_id":"ik-sprayers-ik-foam-pro-12-alk-schaumsprueher-alkalisch","title":"\"iK Foam\" Pro 12 Alk Foam Sprayer (Alkaline)","description":"\u003ch2\u003eLarge-Area Alkaline Foam Without Compromise: iK Sprayers \"iK Foam\" Pro 12 Alk Foam Sprayer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe iK Sprayers iK Foam Pro 12 Alk is a professional high-volume foam sprayer with EPDM seals, specially developed for highly alkaline foam cleaners, enabling an even, adhesive foam layer for intensive pre-washing and professional cleaning.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eiK Sprayers iK Foam Pro 12 Alk\u003c\/strong\u003e is aimed at users for whom pre-washing is not just a step, but a process. Large vehicles, high throughput, strong alkaline foam cleaners – this is precisely where this system plays to its strengths. With its generous tank volume, uncompromising alkali resistance and genuine foam generation, the Foam Pro 12 Alk is not an accessory, but a central working tool for professional detailing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-volume foam sprayer:\u003c\/strong\u003e ideal for SUVs, vans, fleets and series vehicles with minimal interruptions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPDM seals for strong alkalis:\u003c\/strong\u003e permanently resistant to aggressive foam cleaners with high pH values.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEven, adhesive foam layer:\u003c\/strong\u003e optimal for effective dirt removal before hand washing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAlkaline high-volume foam sprayer for professional pre-washing\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003ealkaline high-volume foam sprayer\u003c\/strong\u003e iK Foam Pro 12 Alk was developed for applications where smaller foamers reach their limits. The high capacity allows long working intervals without constant refilling – a decisive advantage for intensive pre-washing or commercial use. Alkaline snow foams not only require chemical resistance, but also sufficient contact time. The foam produced adheres reliably to the surface and gives the cleaner the necessary time to effectively dissolve road dirt, grease films and organic deposits.\u003c\/p\u003e\n\u003ch3\u003eEPDM seals, foam quality and constant pressure performance\u003c\/h3\u003e\n\u003cp\u003eAt the heart of the iK Foam Pro 12 Alk is the EPDM sealing system, which is specially designed for permanent contact with highly alkaline chemicals. EPDM remains dimensionally stable, tight and smooth-running – even with intensive use. In combination with the stable pressure system, an even foam with a reproducible structure is created. The foam is neither too wet nor unstable, but precisely designed to adhere reliably to paint, glass, plastic and rims. For the user, this means maximum control over the application and efficient use of cleaning chemicals.\u003c\/p\u003e\n\u003ch3\u003eEfficiency, durability and clear distinction from standard foamers\u003c\/h3\u003e\n\u003cp\u003eThe difference to conventional foam sprayers becomes apparent at the latest after the first few weeks of continuous use. While standard devices quickly lose their tightness or produce uneven foam when used with alkaline products, the iK Foam Pro 12 Alk remains consistently powerful. The robust construction, the alkali-resistant interior and the even foam generation ensure reproducible results and a significantly longer service life. For professional car detailers, this means a clear gain in efficiency: less replacement, less downtime and a foam system that continuously performs at a professional level.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"6 liters","offer_id":56928779075919,"sku":"D1-IKS-82682","price":152.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-foam-pro-12-alk-schaumsprueher-alkalisch.png?v=1769731566"},{"product_id":"solo-cleanline-vario-foam-304-fa-fb-2-liter-schaumsprueher","title":"solo CLEANLine \"VARIOfoam\" (304 FA \/ FB) — 2 Litre Foam Sprayer","description":"\u003ch2\u003eMore control, more dwell time, less stress: solo CLEANLine \"VARIOfoam\" (304 FA \/ FB) — 2 litre foam sprayer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eIf you want to dial in your cleaning foam exactly, the solo CLEANLine VARIOfoam 304 FA\/FB gives you stepless foam-grade adjustment, 3 bar working pressure and a 2-litre tank for even coverage and long dwell time – matched to the pH range of your cleaner.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003esolo CLEANLine \"VARIOfoam\" (304 FA \/ FB) — 2 litre foam sprayer\u003c\/strong\u003e is exactly the tool you grab when \"a bit of foam\" isn't enough and you want dwell time, cling and dosing in your hands like a pro. This is no toy foamer – it's a 2-litre foam pressure sprayer \"Made in Germany\" with patented VARIOfoam tech, 3 bar working pressure and chemical-resistant seals, built for consistent foam output instead of mood-of-the-day foam. And it's not just about how the foam looks, but what it does day-to-day: foam that stays put on vertical panels keeps lifting dirt longer, cuts down on mechanical abrasion (and with it your risk of wash marring) and makes your pre-wash far more controllable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepless foam grade, no swapping parts.\u003c\/strong\u003e You set the foam grade right at the nozzle with a dial – dry\/firm through to wetter\/gel-like, even while you work. That's worth its weight in gold, because every cleaner foams differently and every panel \"wants\" foam differently – and you don't have to unscrew a thing to get it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 litres + 3 bar = longer, more even work intervals.\u003c\/strong\u003e On pre-wash, wheels or big panels, nothing's more annoying than constant refilling or foam that collapses after the first few bursts. With a 2 L tank and 3 bar working pressure you get longer intervals and a more stable foam picture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFA or FB to match the pH range – so seals and performance line up.\u003c\/strong\u003e The 304 FA is built for acidic cleaners (pH 1–7), the 304 FB for alkaline cleaners (pH 7–14). That's not red tape, it's materials science: the right seal type stays fit longer when it works inside the chemistry window it was made for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSetting the foam grade: varioFOAM patented tech and flat-jet spray\u003c\/h3\u003e\n\u003cp\u003eThe heart of it is the \u003cstrong\u003evarioFOAM\u003c\/strong\u003e tech: a patented foam-adjustment unit right ahead of the nozzle that lets you fine-tune the foam grade steplessly – exactly where it counts, namely at the outlet. Instead of living with felt inserts, swapping nozzles or \"trial \u0026amp; error\", you turn the dial and see the structure change straight away: from dry and firm (maximum cling, maximum dwell time) to wetter and gel-like (more wetting, faster flow into edges, badges, gaps). It sounds like a gimmick, but day-to-day it's a real process lever: on smooth vertical panels you want the foam set so it doesn't run off straight away but clings for a long time – because that very dwell time does the chemical work and saves you mechanical friction. The maker calls this out as a clear plus: longer-clinging foam improves cleaning action, cuts mechanical cleaning work and can lower cleaner consumption.\u003c\/p\u003e\n\u003cp\u003eOn top of that, output runs through a special flat-jet nozzle: a flat jet spreads the foam more evenly across a surface than a \"spot\" spray pattern, and you get a clean, closed layer faster. That's the whole point with pre-wash and wheels: not \"lots of foam somewhere\", but \"even coverage everywhere\". And because you can adjust the foam grade while you work, you react straight to real life: in shade a product often foams differently than on warm paint; on matte plastics you sometimes want to work a bit wetter, on painted panels firmer; on bug-covered fronts it can be thicker, on big side panels more efficient. That's the difference between \"foam is fun\" and \"foam does the job\".\u003c\/p\u003e\n\u003cp\u003eIf you want to squeeze the most out of it, think of the foam sprayer as a dosing and contact-time tool: you build an even layer first, give it time to work, then rinse clean – instead of compensating right away with mitt and pressure. For us in detailing that's the elegant route: less risk, more repeatability, and in the end paint that looks less \"worked over\". And yes – it sounds obvious, but being able to steer the foam without taking anything apart is exactly what makes you actually do it – rather than getting fed up after the third re-rig and just carrying on \"somehow\".\u003c\/p\u003e\n\u003ch3\u003epH range 1–7 or 7–14: choosing FKM and EPDM seals right\u003c\/h3\u003e\n\u003cp\u003eThe first thing that decides between joy and frustration is this: \u003cstrong\u003epH range\u003c\/strong\u003e matches material. With the solo CLEANLine VARIOfoam you get two versions you pick by chemistry, not by gut feel: the 304 FA is built for acidic cleaners in the pH 1–7 range (FKM seal), the 304 FB for alkaline cleaners pH 7–14 (EPDM seal). That's exactly how it's listed in the technical data, including 3 bar spray pressure and 2 L fill volume.\u003c\/p\u003e\n\u003cp\u003eWhy it matters: a \"seal\" isn't sexy, but it's the part that decides whether a pressure sprayer runs butter-smooth after a few jobs or suddenly gets stiff, weeps or loses pressure. EPDM often goes where water, steam and lots of water-based chemicals are in play; FKM (often known as Viton®) tends to get picked for higher chemical load, temperature or certain media. Day-to-day that doesn't mean \"one is always better\", it means \"one is the right fit\". That's exactly why SOLO splits the versions by pH window: so your tool stays durable and tight inside its intended chemistry range.\u003c\/p\u003e\n\u003cp\u003eFor car detailing it translates simply: if you work a lot with acidic foams (say for mineral deposits or special jobs), grab the FA. If you mostly run alkaline foams\/degreasers (typical for greasy road film, workshop grime, heavy pre-cleaning), grab the FB. And if you're thinking \"I'll just take one and do everything\" – sure, plenty do, but that's exactly where the classic problems show up: foam goes inconsistent, seals age faster, and you've got a pro tool that suddenly feels like a throwaway sprayer. Pick to match, and the system stays stable: fast pressure build-up, repeatable foam picture, fewer surprises.\u003c\/p\u003e\n\u003cp\u003eExtra bonus: the 304 comes with 2 litres as the \"bigger\" generation and, per the product info, replaces the popular smaller 1-litre versions (303 FA\/FB). Meaning: you get the exact same thinking (pH window + foam control), just with more reach per fill – which simply makes sense for vehicle pre-wash and several cars a day.\u003c\/p\u003e\n\u003ch3\u003eVehicle pre-wash, wheel cleaning: results and best practice in detailing\u003c\/h3\u003e\n\u003cp\u003eIf you want to play the \u003cstrong\u003evehicle pre-wash\u003c\/strong\u003e part right, foam isn't a show effect but \"contact time on paint\" – and that's exactly what the solo CLEANLine VARIOfoam (304 FA\/FB) is built for: you lay down a homogeneous foam layer that clings longer on smooth, vertical panels and can therefore work longer. The maker describes it as a clear benefit: longer dwell time improves cleaning action, cuts mechanical cleaning work and can let you use more neutral chemistry; lower aerosol formation is also named as a plus. For us in car care the key point: the more dirt you dissolve chemically and with time, the less you have to \"push away\" later with the wash mitt – and that's exactly the lever against wash marks.\u003c\/p\u003e\n\u003cp\u003eWith wheels the principle is similar, but the surface is more complex: spokes, edges, bolt holes – everywhere the foam can be either too dry (sits nicely but wets poorly) or too wet (runs straight off). Here the varioFOAM adjustment is your trump card: you set it so the foam clings at critical spots but has enough \"wetness\" to creep into the geometry. And because you can re-tune while you work, you adapt: warm wheel vs cold wheel, polished face vs rough casting, light soiling vs baked-on film. You don't have to overdose just because your application is uneven – you make it even.\u003c\/p\u003e\n\u003cp\u003eAnother practical sweet spot: interior and textile surfaces, when you deliberately want to work with foam instead of \"wet soup\". The product info explicitly names moisture-sensitive surfaces like carpets and textile surfaces as a suitable application, because foam holds the moisture more on the surface and \"soaks through\" less. In detailing that's a classic pro move: controlled chemistry on the surface, then take it up\/extract cleanly, rather than flooding everything. Important: here too the setting decides – too dry can reduce wetting, too wet becomes \"water work\" again. Which is exactly why stepless re-tuning is worth so much.\u003c\/p\u003e\n\u003cp\u003eTo get genuinely premium results with the foam sprayer, think about three things – without checklist overload: first, your cleaner has to be foam-capable (sounds obvious, but it's the most common reason for disappointing \"foam\"). Second, even coverage matters more than maximum foam height: a calm, closed film works better than \"peaks and valleys\". Third: let time work for you. Foam is there to extend dwell time; if you panic-rinse after ten seconds, you throw away the whole advantage. And because at Detailing1 we don't just sell but love processes: combine the foamer smartly with your wash routine. After pre-wash you want a really good \u003ca href=\"\/en\/collections\/autoshampoo\"\u003ecar shampoo with high slickness\u003c\/a\u003e, because the remaining dirt then comes off the paint more easily and safely. When you dry after rinsing, a \u003ca href=\"\/en\/collections\/trockentuecher\"\u003ehigh-pile drying towel\u003c\/a\u003e makes the difference, because it soaks up water fast without \"pushing\". And on wheels a \u003ca href=\"\/en\/collections\/felgenreinigung\"\u003ematching wheel cleaner\u003c\/a\u003e plus brush is still the combo that turns \"clean\" into \"detailing-clean\" – with the foam application as your controlled starting point.\u003c\/p\u003e\n\u003cp\u003eBottom line, the solo CLEANLine VARIOfoam 304 isn't just \"a foam sprayer\", it's a tool that gives you process control: foam structure, dwell time and chemistry compatibility are definable instead of random. That's exactly what high-end detailing feels like: you decide the result – not the accessory.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"solo","offers":[{"title":"2 liters \/ Acid (pH 1-7) 304 FA","offer_id":56936685142351,"sku":"D1-SOL-30431","price":27.63,"currency_code":"EUR","in_stock":true},{"title":"2 liters \/ Alkaline (pH 7-14) 304 FB","offer_id":56936685175119,"sku":"D1-SOL-30432","price":27.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/solo-cleanline-vario-foam-304-fa-2-liter-schaumsprueher.png?v=1769813735"},{"product_id":"solo-cleanline-variofoam-333-fa-4-liter-schaumsprueher","title":"CLEANLine \"VARIOfoam\" (333 FA) 4-liter foam sprayer with coiled hose","description":"\u003ch2\u003eMore grip, more control, less stress: solo CLEANLine \"VARIOfoam\" (333 FA) as a professional foam sprayer with spiral hose\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe solo CLEANLine \"VARIOfoam\" (333 FA) is a 4-liter foam sprayer with 3 bar working pressure and an adjustable varioFOAM nozzle, allowing you to precisely dose cleaning foam from dry and firm to gel-like and moist while spraying – ideal for pre-washing and rims.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003esolo CLEANLine \"VARIOfoam\" (333 FA) — foam sprayer with spiral hose\u003c\/strong\u003e is exactly the tool you need if you don't just want \"some foam\" in your pre-wash, but a reproducible, clean foam layer that truly adheres to vertical surfaces. The 333 FA is a compact, robust foamer \"made in Germany\" with a 4.0 liter nominal volume, 3 bar working pressure, and chemical-resistant FKM seals – built for professional cleaning foam, not amateur puffing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003evarioFOAM control instead of foam lottery\u003c\/strong\u003e – The adjustment dial on the nozzle allows you to continuously adjust the foaming degree, even while spraying. This is invaluable when you want to switch between a \"thick carpet for long dwell time\" and \"moist foam for quick wetting\" – without unscrewing or reconfiguring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 liters of reach for real surfaces\u003c\/strong\u003e – With a 4.0 L nominal volume and a 1.4 m hose plus a 40 cm spray lance, you can comfortably move around the car, tackle sills and the front, and work cleanly in sections. Especially for pre-wash and rims, \"not constantly refilling\" makes the difference between relaxed and annoyed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFKM seals for demanding chemicals\u003c\/strong\u003e – SOLO specifies use with acid-based foaming cleaners in the pH range 1–7; at the same time, according to the product information, the 333 FA is also described for neutral as well as strongly acidic and slightly alkaline cleaners. For you, this means: a lot of leeway – but always dose and test according to your chemical manufacturer's instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ePre-wash foam pressure sprayer with varioFOAM: why the foaming degree is everything in detailing\u003c\/h3\u003e\n\u003cp\u003eFor pre-washing, it's not about making it \"white\" – but how the foam works. At its core, it's about contact time, wetting, and controlled run-off: a firm, drier foam adheres longer to paint and plastic, giving surfactants time to dissolve road film. A moister, gel-like foam wets faster and flows more evenly into contours, emblems, and crevices – perfect if you want to cover a lot of area quickly. This is exactly where \u003cstrong\u003evarioFOAM\u003c\/strong\u003e shows its strength: you turn the adjustment dial directly on the nozzle and change the \"dryness\" and density while spraying, without disassembling anything. In everyday use, this is not only comfortable but also ensures repeatable results, because you can fine-tune your setup for the product, temperature, and contamination.\u003c\/p\u003e\n\u003cp\u003eFrom a technical perspective, this is very pleasant for paint protection: If the pre-wash foam adheres evenly, you reduce the need for mechanical \"emergency rubbing\" in the first round – precisely the moment when dirt particles are still most aggressive. This reduces the risk of picking up unnecessary fine wash marks during subsequent wash mitt contact, because you loosen and rinse off more dirt beforehand. And because the 333 FA works with 3 bar operating pressure, the foam layer comes out of the nozzle consistently, instead of collapsing after the first few sprays. The combination of a 4-liter tank, piston pump, and the SOLO special flat spray nozzle is designed to deliver \"surface area\" – meaning hood, doors, and rear in a clean flow.\u003c\/p\u003e\n\u003cp\u003eIf you use the 333 FA with our hose\/spiral hose handling setup, the practical advantage is simple: less tangled hoses around the wheels, less pulling on the device, and more control when moving around the vehicle. And precisely this control is the difference between \"just putting foam on somehow\" and \"putting foam on so that it works for you.\" Our recommendation from daily shop experience fits perfectly here: combine the foamer with a real pre-wash setup, e.g., a suitable \u003ca href=\"https:\/\/detailing1.de\/vorwaesche\/\"\u003epre-wash cleaner for road film\u003c\/a\u003e and – if you want maximum safety – a \u003ca href=\"https:\/\/detailing1.de\/waschzubehoer\/\"\u003egentle wash mitt setup\u003c\/a\u003e for the contact wash afterwards.\u003c\/p\u003e\n\u003ch3\u003eRim cleaning pH range and FKM seals: how to use the 333 FA cleanly and protect materials\u003c\/h3\u003e\n\u003cp\u003eEspecially on rims, foam is not just for show, but strategy: brake dust and film like to settle in edges, around wheel nuts, and in the wheel arch. If you work with a well-adjusted foam there, the chemical stays longer at the scene and doesn't immediately run off. Therefore, the first sentence must be: \u003cstrong\u003eFKM seals\u003c\/strong\u003e are a real practical advantage here, because they are designed for more demanding cleaners. SOLO describes suitability for foaming, acid-based cleaners in the pH range 1–7; the product information also mentions use for neutral, strongly acidic, and slightly alkaline cleaning agents. For you, this means: you can use the 333 FA very broadly – but you should always dilute the chemicals according to the specifications, not \"freely by feel,\" and if in doubt, test it first on an inconspicuous area.\u003c\/p\u003e\n\u003cp\u003eHere's how a clean approach looks in everyday life, without getting lost in a thousand steps: You mix your foaming cleaner in the container, pump up pressure (manually via the piston pump) and first set varioFOAM to \"moist\" so that you quickly get wetting everywhere. Then you switch to \"firmer\" as soon as the surface is wet – then the foam adheres better and the dwell time increases. Exactly this adjustment during spraying is the point where the 333 FA reveals its professional character: You adapt the foam structure instead of constantly changing your product or technique. And with a 1.4 m hose plus a 40 cm spray lance, you can reach rims and wheel arch edges.\u003c\/p\u003e\n\u003cp\u003eIf you are working professionally (or simply like efficiency), the optional compressed air connection valve is interesting: It builds up pressure without manual pumping – practical for longer intervals with a consistent spray pattern. SOLO offers this accessory as a compressed air connection valve with FKM seals and an integrated (automatic) overpressure valve. For us, this is the kind of upgrade you don't \"need\" – but after the first long Saturday, you suddenly won't want to miss it. \u003c\/p\u003e\n\u003cp\u003eSuitable combination from our assortment: For rims, it makes sense to combine the foam with a targeted \u003ca href=\"https:\/\/detailing1.de\/felgenreinigung\/\"\u003erim cleaner setup\u003c\/a\u003e and not forget drying afterwards – a good \u003ca href=\"https:\/\/detailing1.de\/trockentuecher\/\"\u003edrying towel\u003c\/a\u003e prevents water spots and brings the finish to \"done\" faster.\u003c\/p\u003e\n\u003ch3\u003eFoam adhesion on vertical surfaces: dwell time, results, and typical errors with foam sprayers\u003c\/h3\u003e\n\u003cp\u003eThe reason why we love foam at all: on smooth, vertical surfaces, optimally adjusted foam can adhere longer and thus act longer – and precisely this improves the cleaning effect without you having to immediately reach for a brush. The product information explicitly describes this advantage for car cleaning and other vertical, smooth surfaces: more adhesion means more time for the chemistry, less mechanical work, and more relaxed work on sensitive surfaces. This is not \"marketing fog,\" it is simply physics plus chemistry: the more uniform the foam layer, the more uniform the surfactant action. \u003c\/p\u003e\n\u003cp\u003eTypical errors almost always occur in two places: mixture and adjustment. Too thin a mixture leads to \"wet, runs off immediately\" – then you need more product or more mechanical help. Too thick a mixture can look spectacular, but doesn't necessarily clean better, because wetting suffers and you end up struggling with residues. The varioFOAM setting is therefore your fine-tuning tool: first ensure that the surface is cleanly wetted, and then go for more stability if you want dwell time. And another professional tip from practice: If the foam layer suddenly \"collapses\" (i.e., suddenly becomes too watery), it is often not due to the device, but to the pressure cushion. Pump again or – if you want comfort – use a compressed air setup, then the spray pattern remains more stable.\u003c\/p\u003e\n\u003cp\u003eWhat makes the 333 FA so pleasant in our detailing cosmos is its clear design for foam: 3 bar operating pressure, robust handling, and the patented varioFOAM adjustment. This is not a gimmick, but makes you faster, cleaner, and more consistent. And consistency is the real luxury in detail: same foam layer, same dwell time, same results.\u003c\/p\u003e","brand":"solo","offers":[{"title":"4 liters \/ Acid (pH 1-7) 333 FA","offer_id":56938257285455,"sku":"D1-SOL-33331","price":59.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/solo-cleanline-variofoam-333-fa-4-liter-schaumsprueher-spiralschlauch_1.png?v=1769851497"},{"product_id":"solo-cleanline-variofoam-309-fa-fb-9-liter-schaumsprueher","title":"CLEANLine \"VARIOfoam\" (309 FA \/ FB) 9 Liter Foam Sprayer","description":"\u003ch2\u003eMaximally Controlled Cleaning Foam: solo CLEANLine \"VARIOfoam\" (309 FA \/ FB) — 9 Liter Foam Sprayer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe 9-liter solo CLEANLine VARIOfoam foam sprayer generates stable cleaning foam by hand pressure and can be continuously adjusted from \"dry-stable\" to \"moist-gel-like\" via varioFOAM – ideal for vehicle pre-wash, wheels, and large surfaces.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eThe \u003cstrong\u003esolo CLEANLine \"VARIOfoam\" (309 FA \/ FB) — 9 liter foam sprayer\u003c\/strong\u003e is your tool when you don't just want foam \"somehow\", but exactly as the surface needs it: adhesive, controlled, and reproducible. Especially in car care (pre-wash, wheel cleaning), this makes the difference between a \"foam show\" and actual cleaning performance – because a suitably adjusted foam stays on the surface longer and gives the cleaner time to do its job. The CLEANLine foamers are designed for professional cleaning applications and combine a 9-liter tank volume with 3 bar operating pressure and chemical-resistant components such as FKM seals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003evarioFOAM = Custom foam instead of random.\u003c\/strong\u003e You can continuously regulate the foaming degree via an adjustment wheel directly in front of the nozzle – even while spraying. This allows you to switch in seconds from stable\/dry (maximum adhesion) to moist\/gel-like (more flow), without unscrewing anything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 liters + 3 bar, comfortably tackle large areas.\u003c\/strong\u003e The high-volume pump efficiently builds up operating pressure, delivers a clean foam pattern, and ensures longer working intervals – perfect if you don't want to pump again after every other fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional materials for serious chemicals.\u003c\/strong\u003e UV-resistant polyethylene tank, automatic safety valve protection, and FKM seals (chemically robust) are designed to work with foamable neutral and acidic cleaners – from flash rust\/lime in everyday use to vehicle pre-wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVariofoam Foam Sprayer continuous foaming degree for stable cleaning foam\u003c\/h3\u003e\n\u003cp\u003eIf foam \"doesn't work\" in practice, it's rarely due to the cleaner – it's usually due to the wrong foaming degree. This is exactly where \u003cstrong\u003evarioFOAM\u003c\/strong\u003e plays its trump cards: You don't just roughly set the foam once, but fine-tune it during work. The adjustment wheel is located directly in front of the nozzle, so you can adapt the foam character in real-time: drier and more stable if you want maximum adhesion on smooth, vertical surfaces (keyword: longer dwell time), or moister\/gel-like if you need more flow to evenly wet contours, beads, emblems, and intricate areas.\u003c\/p\u003e\n\u003cp\u003eIn car care, this is golden: For pre-wash, you typically want a foam that doesn't run off immediately so that dirt can loosen before you mechanically intervene. This reduces the risk of dragging dirt particles \"dry\" over the paint – not because the foam works magic, but because you give it time to dissolve the layer of dirt. And for wheels? You often want something \"moister\" so that the foam creeps into spoke beds and evenly wets the surface, instead of just decoratively sticking to the outside as a cloud. Precisely this control is the difference between \"foam looks good\" and \"foam works well\".\u003c\/p\u003e\n\u003cp\u003eAlso important is what you \u003cem\u003edon't\u003c\/em\u003e have to do: no unscrewing nozzles, no rebuilding, no fiddling. This is not only comfortable but also makes the process reproducible – you find your setting, remember it, and hit it again next time. And because the foam stays on the surface longer when correctly set, you typically reduce the need for aggressive mechanics. As a result, the process feels more like a professional routine than \"trial and error\".\u003c\/p\u003e\n\u003ch3\u003eVehicle pre-wash and wheel cleaning with 9 liter CLEANLine Foamer 3 bar FKM seals\u003c\/h3\u003e\n\u003cp\u003eIn practice, what counts is: How comfortably does the device work over a complete vehicle – and how cleanly do you get the chemicals where they are supposed to act? The 309 FA is designed as a large foamer with an extremely robust, UV-radiation-resistant polyethylene tank and has a nominal volume of 9 liters. You can conveniently fill cleaning agents through the large filling opening; a fill level marker helps with dosing without you having to \"guess\". The high-volume pump is designed to efficiently build up an operating pressure of 3 bar. In car care, this means: a uniform foam pattern and longer working intervals, without having to pump up pressure every few minutes.\u003c\/p\u003e\n\u003cp\u003eThe spray lance of the 309 FA is a 50 cm plastic tube (non-corrosive) and the hose is 1.4 m long – this sounds like \"small numbers\" but makes a big difference in handling: you can move around the front, sills, and rear in a controlled manner without constantly forcing yourself into awkward angles.\u003c\/p\u003e\n\u003cp\u003eRegarding chemical compatibility, without marketing fog: The system is suitable for foamable neutral and acidic cleaning agents and is described, among other things, for lime residues\/urine stone, flash rust, and the application of acidic cleaning foams; additionally, its suitability for car care, vehicle pre-wash, and wheel cleaning is explicitly mentioned. The technical core behind this is chemical-resistant components – especially FKM seals – plus nozzle technology designed for foam application (special flat jet nozzle).\u003c\/p\u003e\n\u003cp\u003eWhat does this mean for you in your daily detailing routine? You can set up your pre-wash so that the foam not only \"sits on top\" but also evenly wets and adheres to the surface. After that, you continue working – depending on the setup with high-pressure, rinseless pre-solution, or hand wash. And if you're working on large areas (workshop, fleet, camper, off-road vehicles), you'll love the optional accessory options: There's a wheel set with a handle so you can roll instead of carry, and a compressed air connection valve to build up pressure externally – both are available as optional accessories. This means: less hauling, more rhythm in your workflow.\u003c\/p\u003e\n\u003ch3\u003eCleaning foam on vertical surfaces dwell time cleaning performance and typical areas of application\u003c\/h3\u003e\n\u003cp\u003eA good foamer is essentially a \"time manager\" for chemicals. The crucial lever is the dwell time: On smooth, vertical surfaces, foam that is too wet runs off immediately – the active ingredients are gone before they can work. An optimally set, stable foam adheres longer, can act longer, and thereby improves cleaning performance. The product description addresses precisely this benefit: longer adhesion, better performance, and less mechanical cleaning work.\u003c\/p\u003e\n\u003cp\u003eTypical application areas are not only paint and wheels but everything that benefits from controlled, adhesive foam: sill areas, door sills, door rebates (carefully dosed), plastic attachments – and also textile surfaces and carpets are mentioned as suitable. And with that, we come to the next practical point: clean foam application usually also means less unnecessary spray mist in the room because you are not \"working into the air\" with fine mist, but with foam that goes where you need it.\u003c\/p\u003e\n\u003cp\u003eWhat many underestimate: The combination of 9-liter volume, 3 bar working pressure, and continuous foam regulation not only makes the system \"stronger\" but, above all, more consistent. Consistency in detailing is quality: You want your foam to react the same way on the first panel as on the last. This reduces errors (too short dwell time, too wet application, too much product), saves nerves, and ensures reproducible results.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"solo","offers":[{"title":"9 liters \/ Acid (pH 1-7) 309 FA","offer_id":56938291790159,"sku":"D1-SOL-30931","price":81.52,"currency_code":"EUR","in_stock":true},{"title":"9 liters \/ Alkaline (pH 7-14) 309 FB","offer_id":56938291757391,"sku":"D1-SOL-30932","price":81.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/solo-cleanline-variofoam-309-fb-9-liter-schaumsprueher.png?v=1769852728"},{"product_id":"sonax-profiline-powerfoamer-schaumzerstauber","title":"PROFILINE PowerFoamer Foam Sprayer","description":"\u003ch2\u003eCompressed Air Foam for Professional Pre-Wash — SONAX PROFILINE PowerFoamer\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the PowerFoamer used for in professional operations? The SONAX compressed air foam sprayer is a compressed air-powered foam sprayer for pre-washing with active foam — it applies concentrated cleaning foam over large areas of vehicle surfaces and enables gentle, low-contact loosening of dirt before the actual washing process.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe professional washing process does not begin with the wash mitt, but with the foam. In modern detailing shops and car washes, low-contact pre-washing is an integral part of the process: active foam is applied to the dirty paint, loosening dirt, road film, and organic residues without mechanical contact — thus minimizing the risk of swirl marks and holograms. The \u003cstrong\u003eSONAX PROFILINE PowerFoamer\u003c\/strong\u003e is the professional tool for this step: compressed air-powered, with high foam performance, and optimized for continuous use in operations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompressed air operation for uniform foam generation without a hand pump.\u003c\/strong\u003e Unlike hand-pumped foam sprayers, the PowerFoamer works with compressed air from a compressor. This creates a uniform, stable foam throughout the entire period of use — without declining pressure due to hand pump fatigue. For businesses that pre-wash many vehicles daily, the compressed air-powered version is significantly more efficient and ergonomically gentler than manual pumping.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLarge-area foam application for quick vehicle coverage.\u003c\/strong\u003e The PowerFoamer system allows for complete coverage of a vehicle with active foam in a short time. The foam nozzle creates a dense, adhesive foam that does not run off immediately on vertical surfaces (doors, fenders), but has sufficient dwell time to loosen dirt. This adhesion capability is an essential quality feature of a professional foam system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3-piece set — optimized for direct use in professional operations.\u003c\/strong\u003e The PROFILINE PowerFoamer set consists of the pressure tank, the foam generator attachment, and the lance system for various applications. The 3-piece format allows for flexible adaptation to different cleaning tasks — from full-surface foam application to targeted foam injection in hard-to-reach areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eLow-contact pre-washing with active foam has gained significant importance in professional detailing businesses in recent years. Awareness of holograms, swirl marks, and micro-scratches caused by improper contact washing has led many businesses to restructure their washing process. The result: a two-stage process of low-contact pre-washing followed by contact washing has established itself as the standard. The PowerFoamer is the tool that implements this first step professionally and efficiently.\u003c\/p\u003e\n\n\u003cp\u003eThe difference between a foam result from the PowerFoamer and a simple spray bottle foam is immediately visible: The PowerFoamer produces a creamy, stable foam with high adhesion that spreads evenly over the surface. A spray bottle foam is more watery, runs off faster, and has less dwell time on vertical surfaces. For professional results in active foam pre-washing, the difference in foam quality and dwell time efficiency is significant.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e For optimal foam quality, a concentrate mixture of about 1:10 to 1:20 in the container is recommended, depending on the desired viscosity and cleaning intensity. The SONAX PROFILINE ActiFoam Energy as an active foam concentrate is ideally matched to the PowerFoamer system: the foam adheres well to vertical surfaces and has sufficient cleaning capacity for medium to heavy road dirt. Dwell time 3–5 minutes, then rinse completely with a high-pressure cleaner — only then does the contact wash follow. The cleaning principle: foam loosens, high pressure washes away, cloth only polishes afterwards.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCompressed Air Technology of the PROFILINE Foam Sprayer — Foam Quality and Device Structure\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE PowerFoamer\u003c\/strong\u003e uses compressed air from a compressor to mix cleaning concentrate and water into a stable foam. The principle is similar to professional catering cream machines: under pressure, a gas (air) is introduced into a liquid, resulting in a stable foam or cream structure. For foam sprayers for car washing, this results in a dense, creamy active foam with high adhesion and long dwell time on the vehicle surface.\u003c\/p\u003e\n\n\u003cp\u003eThe foam generator attachment of the PowerFoamer determines the foam consistency: Different nozzle settings allow switching between finer, adhesive high foam and a coarser, more intensively cleaning wet foam. Fine high foam is suitable for sensitive surfaces and freshly sealed vehicles; coarse wet foam is suitable for heavily soiled vehicles with stubborn road film deposits. This flexibility in foam consistency is an advantage that simple hand pump foam sprayers do not offer.\u003c\/p\u003e\n\n\u003cp\u003eThe pressure tank of the PowerFoamer is made of durable material that resists solvent-based cleaning concentrates. In professional operations, foam sprayers are filled daily with various concentrates — a container that is corroded by aggressive cleaners or leaks is a safety and efficiency risk. SONAX manufactures PROFILINE accessories according to professional standards for daily continuous use.\u003c\/p\u003e\n\n\u003cp\u003eThe PowerFoamer is connected to a compressor via standard compressed air connections, which are already available in professional workshops and detailing shops. The operating pressure is within the typical compressor operating range of 4–8 bar — no special equipment is necessary. This makes entry into the compressed air-powered foam system uncomplicated for businesses already working with compressors.\u003c\/p\u003e\n\n\u003ch3\u003eApplication of the PowerFoamer — Workflow in Professional Washing Operations\u003c\/h3\u003e\n\n\u003cp\u003eWhen calibrating the foam generator, the air-to-liquid ratio setting is crucial: too high an air ratio produces dry, unstable foam that quickly dissolves and hardly adheres. Too low an air ratio produces wet, heavy foam that runs off immediately. The ideal ratio is in the middle range: creamy foam that remains stable on vertical surfaces for at least 3–4 minutes. This setting depends on the concentrate used and the water hardness and must be calibrated once for each operation.\u003c\/p\u003e\n\n\u003cp\u003eThe use of the PowerFoamer follows a clear process: fill the container with concentrate and water, connect compressed air, spray foam, let it dwell, rinse. The entire foam pre-wash step takes between 5 and 15 minutes, depending on vehicle size — a time investment that is compensated by reduced mechanical stress during the subsequent hand wash step. Less dirt on the paint when contacting with the wash mitt means less risk of scratches.\u003c\/p\u003e\n\n\u003cp\u003eFor businesses with a high vehicle throughput, it is advisable to purchase several containers so that one can be filled while the other is in use. The PowerFoamer can be quickly cleaned between container changes: a few passes with clear water rinse the residues out of the system. A more thorough cleaning after the workday with a cleaning cycle prevents shampoo residue deposits in the nozzles.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-profiline-actifoam-energy-reinigungsschaum\"\u003eSONAX PROFILINE ActiFoam \"Energy\"\u003c\/a\u003e is the optimal concentrate for the PowerFoamer: the formulation is designed for quick dirt loosening with short dwell time and, with the PowerFoamer system, produces a stable, adhesive high foam. The dosage can be adjusted depending on the degree of contamination — lightly soiled vehicles with lower concentration, heavily soiled with higher dosage.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Application for the PowerFoamer — Detailing, Car Dealerships, and Car Washes\u003c\/h3\u003e\n\n\u003cp\u003eThe professional foam system is primarily designed for commercial use, where many vehicles are pre-washed daily. In car detailing businesses, foam pre-washing is a standard step that significantly reduces the risk of scratches during contact washing. In car dealerships that prepare new and used cars, low-contact pre-washing ensures the paint quality of the vehicles for delivery.\u003c\/p\u003e\n\n\u003cp\u003eFor private detailing enthusiasts with a compressor, the PowerFoamer is a professional alternative to garden hose foam attachments or hand-pumped foam sprayers. The foam quality is significantly higher, the dwell time longer, and the use ergonomically more comfortable than with hand-pumped versions. Anyone who wants to prepare their vehicle with professional results will find the compressor accessory that enables this quality in the PowerFoamer.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-profiline-foamsprayer-schaumspruher\"\u003eSONAX PROFILINE FoamSprayer\u003c\/a\u003e is the alternative for businesses or private users without a compressed air connection: The FoamSprayer works with a built-in pressure pump and enables similar foam quality, but with manual pump operation. For beginners or occasional use, the FoamSprayer is the more accessible option — for daily professional use, the PowerFoamer is more efficient and ergonomically superior.\u003c\/p\u003e\n\n\u003ch3\u003ePROFILINE PowerFoamer in Comparison — Compressed Air vs. Hand Pump and Foam Systems\u003c\/h3\u003e\n\n\u003cp\u003eThe direct comparison between the compressed air-powered PowerFoamer and a hand-pumped foam sprayer shows the differences mainly in continuous use: for one vehicle, the difference is marginal — for ten vehicles daily, the ergonomics and consistent foam quality of the PowerFoamer are crucial. The hand pump fatigues, the pressure drops, the foam quality decreases throughout the day. The PowerFoamer delivers the same foam quality on the last vehicle as on the first.\u003c\/p\u003e\n\n\u003cp\u003eCompared to professional foam lance systems for high-pressure cleaners, the PowerFoamer is a different category of device: high-pressure foam lances use the water pressure of the high-pressure cleaner for foam generation. The foam quality of these systems is often less stable and stickier than with the compressed air PowerFoamer. In addition, high-pressure foam lances can only be used in conjunction with a high-pressure cleaner — the PowerFoamer is independent of this and can also be used as a standalone foam system.\u003c\/p\u003e\n\n\u003cp\u003eFor businesses that need both a \u003ca href=\"\/en\/products\/sonax-profiline-druckpumpzerstauber-fur-losemittel-spruhflasche\"\u003ePROFILINE Pressure Pump Sprayer\u003c\/a\u003e for special cleaners and a foam system for pre-washing, SONAX offers both product categories in the PROFILINE range. The Pressure Pump Sprayer covers targeted individual applications; the PowerFoamer handles large-area foam application. Both systems complement each other in the professional cleaning workflow.\u003c\/p\u003e\n\n\u003ch3\u003eBuy SONAX PROFILINE PowerFoamer — for Professional Businesses and Ambitious Users\u003c\/h3\u003e\n\n\u003cp\u003eThe PROFILINE PowerFoamer is aimed at professional detailing businesses, car dealerships, and detailing studios looking for a high-quality foam solution for low-contact pre-washing. The 3-piece set offers complete, ready-to-use equipment without the need to purchase additional accessories.\u003c\/p\u003e\n\n\u003cp\u003eFor businesses operating in the premium segment of vehicle detailing, the PowerFoamer is also a communication tool for the customer: a vehicle that is pre-washed with compressed air foam before the mitt touches it signals a professional approach. Customers who understand why foam pre-washing is important appreciate this step — and are willing to pay for this care. The PowerFoamer is therefore not just a tool, but also a signal of quality in customer discussions.\u003c\/p\u003e\n\n\u003cp\u003eThe investment in the PowerFoamer pays for itself over time through reduced scratch repairs and shorter washing times per vehicle: if the pre-wash effectively loosens dirt, the hand wash step requires less pressure and fewer repetitions. This saves labor time and protects both the paint of customer vehicles and the tools of the business. For businesses that position quality as a selling point, professional foam accessories are a visible signal to the customer: here, work is done systematically.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"3 parts","offer_id":57345160085839,"sku":"D1-SNX-4962050","price":70.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-powerfoamer_3-teile.png?v=1774736655"}],"url":"https:\/\/detailing1.co\/en\/collections\/schaumsprueher.oembed","provider":"Detailing1","version":"1.0","type":"link"}