{"title":"Rimuovi scolorimenti di COLOURLOCK","description":"\u003ch2 id=\"speakable-headline\"\u003eRemove denim stains from light-colored leather with the COLOURLOCK Stain Remover\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n\n  \u003cp\u003e\u003cem\u003eWhat is the COLOURLOCK Stain Remover? It is the final cleaning stage for pigmented smooth leather: COLOURLOCK \"GLD Solvent\" dissolves denim stains, dye transfer, and old coating residues that have already penetrated the color layer and can no longer be removed by standard leather cleaners. Developed in professional leather repair, now under the umbrella of Koch-Chemie.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eThe COLOURLOCK Stain Remover\u003c\/strong\u003e takes over in cases where regular cleaning reaches its chemical limit: blue denim dye that has soaked into the color layer of light-colored leather seats, dye transfer from belts and jackets, or old coating residues before a repair. \u003ca href=\"\/it\/products\/koch-chemie-colourlock-gld-solvent-leder-verfaerbungen-entferner\"\u003eCOLOURLOCK \"GLD Solvent\"\u003c\/a\u003e opens the top color layer in a controlled manner, loosens the embedded pigments, and clears the area for conditioning, color refreshing, or resealing. It is backed by the repair expertise of the Lederzentrum (Leather Center) since 1995.\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDissolves what no leather cleaner can reach.\u003c\/strong\u003e Surfactants work on the top layer — soaked-in denim blue is embedded within it. The solvent formula of GLD Solvent loosens the bond of the embedded pigments, allowing the stain to be lifted into the cloth instead of sinking deeper into the leather.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDeveloped as repair preparation, since 1995.\u003c\/strong\u003e COLOURLOCK originated in the leather center, where discolored leather is pre-treated and prepared before any recoloring. This background explains its controlled effectiveness: strong enough for embedded pigments, yet dosed carefully enough so that the leather color survives the treatment.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eThree sizes from pen to liter.\u003c\/strong\u003e The 40 ml version (pen) works with pinpoint accuracy on individual seat bolsters and bag edges, 250 ml covers entire seat sets and furniture, and 1000 ml \/ 1 liter is the size for detailers who have light-colored leather on their workbench every week.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003eExpert tip from Detailing1:\u003c\/strong\u003e The most expensive mistake when dealing with denim stains is reaching for household remedies. We regularly receive inquiries about light-colored leather seats that are more stained after using washing powder solutions, body lotion, or magic erasers: these agents spread the loosened dye over a large area, rub it deeper into the layer, or even sand off the pigmentation. The safe path is the \"escalation ladder\": remove fresh stains with a leather cleaner, and only use COLOURLOCK \"GLD Solvent\" on what remains — apply a few drops to a cloth, never directly onto the leather, and check the cloth after every pass.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eDenim blue migrates into the top layer with every drive\u003c\/h3\u003e\n\u003cp\u003eIndigo, the classic denim dye, is not rub-resistant: it barely penetrates cotton fibers during dyeing, instead settling on their surface. This is exactly why jeans fade over the years — and why a hint of dye transfers onto whatever the pants touch during every drive. Friction, body heat, and a little moisture are enough for seat bolsters, surfaces, and entry edges to slowly turn blue on beige or gray smooth leather.\u003c\/p\u003e\n\n\u003cp\u003eThe time factor determines the effort required. Fresh abrasion lies on the finish — the lacquer-like color and protective layer that pigmented automotive leather has — and can still be removed by any good leather cleaner. Over weeks, heat and pressure work the pigments into the layer, and from this point on, no surfactant can hold them. What is a quick cleaning job today may become a case for solvent chemistry in winter — and potentially a case for full recoloring a year later.\u003c\/p\u003e\n\n\u003cp\u003eMoisture noticeably accelerates the transfer. Rain-soaked jeans or a sweaty summer day release more dye than dry fabric — the moisture loosens the indigo on the fiber surface and carries it into the microstructure of the top layer. Those who regularly get in with wet pants in autumn will see after one season on beige leather what would otherwise take two years. A periodic inspection of contact zones is therefore especially worthwhile after the wet season.\u003c\/p\u003e\n\n\u003cp\u003eLight-colored leather is not more sensitive than dark; it is just more honest: the same dye transfer occurs invisibly on black seats. And the problem doesn't end with car seats — light-colored leather bags, sofa edges, and furniture car seats show the same blue shadows on contact zones. For the remover, the origin doesn't matter as long as the substrate is right: pigmented smooth leather with an intact color layer.\u003c\/p\u003e\n\n\u003ch3\u003eThe stain remover begins where leather cleaners end\u003c\/h3\u003e\n\u003cp\u003eThe sequence is the real buying guide. Fresh staining belongs to the \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-reinigung-lederreiniger\"\u003eCOLOURLOCK leather cleaners\u003c\/a\u003e: the mild version takes care of the abrasion of the last few weeks, the strong version even handles compacted deposits of grease and dye. If blue is still visible after two passes, the dye has penetrated the layer — from here, the chemistry changes, and COLOURLOCK \"GLD Solvent\" takes over.\u003c\/p\u003e\n\n\u003cp\u003eWithin the \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-reinigung-fleckenentferner\"\u003eCOLOURLOCK stain removers\u003c\/a\u003e, each type of damage has its own tool: COLOURLOCK \"Stain Remover\" takes care of stains and wax residues, COLOURLOCK \"Grease Absorber Paste\" pulls embedded grease out of the leather via absorption, and the GLD Solvent is the answer to dye transfer and coating residues. Those who distinguish between the types of damage buy correctly once rather than failing three times.\u003c\/p\u003e\n\n\u003cp\u003eThe if-then logic in short: If the stain is fresh, the cleaner is enough. If it has soaked in, the GLD Solvent takes over. If color is missing or a shadow remains afterward, the recoloring process begins. Each stage saves the next — as long as you start early enough.\u003c\/p\u003e\n\n\u003cp\u003eFrom daily life at Detailing1, we can clearly identify the most common confusion: stains versus abraded color. Blue on beige leather is a case for the remover. Light spots on dark leather are almost always the opposite — the pigmentation has been worn away; there is nothing to dissolve, but rather something to recolor. The test is simple: a stain lies over the leather color as a foreign shade; abrasion exposes the lighter underside. When in doubt, send us a photo before you order.\u003c\/p\u003e\n\n\u003ch3\u003eCOLOURLOCK \"GLD Solvent\" loosens the stain, not the leather\u003c\/h3\u003e\n\u003cp\u003eThe formulation works with a solvent formula tailored to leather. The solvents slightly swell the top finish and loosen the bond of the embedded pigments — the layer becomes receptive again for a moment, and the stubbornly stuck denim blue can be wiped off like fresh paint. This means for you: the stain moves into the cloth instead of deeper into the leather, without scrubbing and without creating shiny, rubbed-off spots.\u003c\/p\u003e\n\n\u003cp\u003eThis controlled loosening is not a side effect, but the purpose. GLD Solvent comes from repair preparation: before any recoloring, old coating residues and stains must be removed, and the surface should then be ready to accept color and filler. This dual role makes the remover so useful — it saves light-colored seats that don't need recoloring yet, and prepares the cases that do.\u003c\/p\u003e\n\n\u003cp\u003eThe same formula clears up the second typical legacy issue on used leather: surfaces that have become sticky. Old care layers, plasticizer-containing cockpit sprays, or previous dyeing attempts build up a tough film over the years that survives every cleaner and causes every cloth to snag. GLD Solvent loosens such coating residues just as it does color pigments — the surface becomes dry and grippy again and can subsequently be cleaned and rebuilt.\u003c\/p\u003e\n\n\u003cp\u003eThe difference from harsh universal solvents from the household lies exactly in this dosage. Acetone or nail polish remover dissolve the finish uncontrollably and leave behind matte, damaged islands that then really need to be recolored. The balanced formula works more slowly, but the color layer remains intact as a whole — you decide via cloth pressure and passes, not the solvent decides over your leather.\u003c\/p\u003e\n\n\u003ch3\u003eThe cloth shows you when the spot is done\u003c\/h3\u003e\n\u003cp\u003eBefore the remover comes the preparation: clean the area, let it dry, then apply a few drops of GLD Solvent to a white cloth or pad — white because the cloth is your measuring instrument. Work selectively in short, overlapping passes with light pressure, pick up loosened residues, change the cloth side, and continue. Never apply directly to the leather: the solvent will soak in locally and leave rings.\u003c\/p\u003e\n\n\u003cp\u003eAfter every pass, read the cloth. Blue on the cloth means the stain is loosening — keep going. If the seat color comes off, the layer is dissolved: pause, let it dry, assess the result. This is exactly why every treatment starts in an inconspicuous spot. The first time, this cautious approach feels hesitant, and that is intended — two careful passes with intermediate checks beat a bold one after which the spot must be recolored.\u003c\/p\u003e\n\n\u003cp\u003ePlan the treatment as stages, not a test of strength. Expect several short passes per zone instead of one long one: loosen, pick up, let dry, re-evaluate. Between passes, only the dry surface shows the true status — freshly loosened zones appear darker when moist than they are. Whoever decides anew after every pass automatically stops at the right moment.\u003c\/p\u003e\n\n\u003cp\u003eAfter the last pass, the area is neutralized: wipe off with a slightly damp cloth or clean mildly so that no solvent residues continue to work in the layer, then allow to dry completely. The treated zone is now clean and unprotected — it needs a thin layer of care as a finish or, if color has come off, a color-based reconstruction as described in the next section.\u003c\/p\u003e\n\n\u003ch3\u003eNot every stain and not every leather is its case\u003c\/h3\u003e\n\u003cp\u003eThe first boundary is the type of leather. GLD Solvent belongs exclusively on pigmented smooth leather with an intact color layer. Open-pored aniline leather, nubuck, and suede soak up the solvent like blotting paper — this creates dark rings and spots that look worse than any denim mark. Synthetic leather is also not its territory: what looks like leather in modern cars is often a plastic surface, which reacts differently to solvents. In case of doubt, the equipment list helps — or a quick message to us before you start.\u003c\/p\u003e\n\n\u003cp\u003eThe second boundary is the depth. We often see years-old denim edges on beige sets where the remover visibly extracts a lot but a pale shadow remains — the dye has traveled through the finish into the leather, and no external chemistry can reach it there. To be honest: from this point on, the spot is no longer a cleaning case, but a case for \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-faerben-farbauffrischer\"\u003eCOLOURLOCK color refreshers\u003c\/a\u003e, which seal the tone again with Leather Fresh.\u003c\/p\u003e\n\n\u003cp\u003eAnyone recoloring should plan for one extra layer: residual dyes can bleed through fresh color over time. That is exactly why COLOURLOCK offers a \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-faerben-sperrschicht\"\u003ebarrier layer against stains\u003c\/a\u003e that sits between the substrate and the new color and traps residual pigments — the reason why professionally recolored light-colored seats don't shimmer blue again after six months. A top coat then forms the finish as a wear layer. This is how removing, blocking, and dyeing work together, instead of treating the same spot three times.\u003c\/p\u003e\n\n\u003ch3\u003eThe pen saves the bolster, the liter the fleet\u003c\/h3\u003e\n\n\u003cp\u003eThe container question is answered by your damage profile. For the classic situation — a blue seat bolster, a discolored bag edge, a belt mark on the backrest — the 40 ml version (pen) is intended: pinpoint, economical, without an open bottle aging on the shelf. The 250 ml fits when a complete light-colored set or a sofa is involved, and 1000 ml \/ 1 liter is the size for detailers for whom discolored leather is a weekly routine. The same scale applies to the living room: for the individual blue edge on a light-colored sofa, the pen is sufficient; for the entire living area, the bottle.\u003c\/p\u003e\n\n\u003cp\u003eEqually honest in the other direction: If the stain is fresh, you don't even need the remover yet — the mild cleaning round takes it off, and the bottle stays on the shelf. What we observe again and again at Detailing1: Light-colored leathers that are cleaned and lightly conditioned twice a year practically never develop a stain that would require solvents. The care film slows down the absorption, and the routine removes the abrasion before it belongs to the layer. All tools for the cases in between: \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-reinigung-fleckenentferner\"\u003eBack to COLOURLOCK stain removers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eAnd the tip that isn't in any manual: Most indigo leaves new jeans in the first few washes. Anyone who washes dark pants twice before they sit on light leather for the first time sends the loose dye into the washing machine instead of into the seat bolster. The best stain remover is the one whose pen you still find almost full in your cupboard after years.\u003c\/p\u003e","products":[],"url":"https:\/\/detailing1.co\/it\/collections\/koch-chemie-colourlock-reinigung-verfaerbungsentferner.oembed","provider":"Detailing1","version":"1.0","type":"link"}