{"title":"Pretrattamento e ritocco di COLOURLOCK","description":"\u003ch2 id=\"speakable-headline\"\u003eCOLOURLOCK leather pre-treatment makes brittle leather repairable\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n\n  \u003cp\u003e\u003cem\u003eWhat is COLOURLOCK pre-treatment and repair? The products used before adhesive, filler, and color: a water-soluble leather softener that replenishes dried-out fibers, a softening agent that loosens the stiffened fibers in decades-old leather, and a polish that removes light scratches from open-pored leather without the need for any color.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eCOLOURLOCK leather pre-treatment\u003c\/strong\u003e is the product group used prior to any repair. COLOURLOCK \"Licker Oil\" replenishes dry fibers and remains water-soluble so that color will adhere afterward. COLOURLOCK \"Old Leather Softener\" is pure oil used to loosen the bonded fibers in old, hardened leather. COLOURLOCK \"Scratch Away\" is part of the repair process and polishes light scratches out of aniline, grease, oil, and nubuck leathers, without a drop of color.\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eThe leather softener is mixed, not applied directly.\u003c\/strong\u003e One part COLOURLOCK \"Licker Oil\" to four parts warm water creates a milky solution that penetrates deep into the fibers. The water evaporates, leaving the oil between the collagen fibers. You can tell it worked if the surface accepts water-based color afterward instead of letting it bead up.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eOld leather becomes soft over a period of days.\u003c\/strong\u003e After each application, the softener needs at least 24 hours to rest at room temperature, accompanied by careful movement and kneading of the area to loosen the fibers. Up to three applications are intended, and one liter is enough for a completely dried-out vehicle interior.\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eNot every scratch requires color.\u003c\/strong\u003e On aniline, grease, oil, and nubuck leathers, a light scuff is usually not a loss of material, but rather displaced fat. COLOURLOCK \"Scratch Away\" works it back into the area. For you, this means: no sanding, no color application, and no need to match colors.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003ePro-tip from Detailing1:\u003c\/strong\u003e The most expensive mistake in this group is leaving oil in the leather — a recurring question we receive. Anyone who has softened a hardened classic car seat using the softener over three rounds is proud of the result and applies the color directly on top. Two weeks later, it rubs off again at the entry edge because water-based leather color cannot adhere to an oiled surface. This is exactly why the manufacturer's instructions state that you must degrease again before dyeing. Therefore, plan for the COLOURLOCK \"Degreaser\" as a fixed step; work it into the side bolster and entry edge for five minutes too long rather than one minute too short, and then check with your finger: the surface must look matte and feel slightly tacky.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePre-treatment is not maintenance, even if both are oil\u003c\/h3\u003e\n\u003cp\u003eMaintenance oil is intended to stay in the leather. Pre-treatment oil is intended only to make the leather supple enough until adhesive, filler, and color can be applied.\u003c\/p\u003e\n\n\u003cp\u003eEverything else follows from this one difference. Maintenance is the final state: you apply it, remove the excess, and leave the leather alone. A pre-treatment is an intermediate state that will be left behind. It may soften the leather, it may darken it, and it must be able to support the next product.\u003c\/p\u003e\n\n\u003cp\u003eThat is why COLOURLOCK \"Elephant Leather Oil\" is listed in the shop under \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-pflege-verhaertetes-leder\"\u003eCare for hardened leather\u003c\/a\u003e and not here. It is intended for leather that is to remain as it is after treatment. The products in this group are intended for leather that will undergo further work. Same starting point, two different goals.\u003c\/p\u003e\n\n\u003cp\u003eThe fact that COLOURLOCK makes this distinction at all is due to their origins. The brand was established in 1995 at the Lederzentrum and has since been supplying saddlers and detailers whose workdays begin with cracked side bolsters and parchment-like classic car seats. Since October 2023, the leather specialist has been part of Koch-Chemie, and production was centralized in Unna during the course of 2024; you will therefore find this line in the shop under the vendor Koch-Chemie × COLOURLOCK.\u003c\/p\u003e\n\n\u003cp\u003eFor your purchasing decision, this is the most useful shortcut this category provides. If color, filler, or adhesive follows, choose from this group. If the leather is to remain as it is, move up a level to \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-pflege\"\u003eCOLOURLOCK care\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eDry, hard, or lightened are three different tasks\u003c\/h3\u003e\n\n\u003cp\u003eThe group is divided according to the condition of the leather, not the part in which it is installed.\u003c\/p\u003e\n\n\u003cp\u003eThe normal case before a color repair is leather that has become dry but is still sound. This is what the \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-reparatur-rueckfetter\"\u003eleather softener\u003c\/a\u003e is for: COLOURLOCK \"Licker Oil\" replenishes the fibers before the sanding pad, spatula, and brush go to work, and it remains water-soluble so that the subsequent color does not land on a separating film. Available in 250 ml for individual repairs and 1000 ml \/ 1 liter for entire seat sets.\u003c\/p\u003e\n\n\u003cp\u003eIt gets one step tougher with the \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-reparatur-weichmacher\"\u003eleather softener\u003c\/a\u003e. COLOURLOCK \"Old Leather Softener\" is made for leather that cracks when bent: classic car seats, motorcycle saddles, furniture unused for decades. It loosens the bonded, solidified fibers, thereby reducing the risk of breakage before anyone even pulls on them. Also available in 250 ml and 1000 ml \/ 1 liter.\u003c\/p\u003e\n\n\u003cp\u003eThe third case is the only one where nothing else follows. The \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-reparatur-kratzer\"\u003eleather scratch remover\u003c\/a\u003e COLOURLOCK \"Scratch Away\" is built for the light scuffs on aniline, grease, oil, and nubuck leather, such as those that occur on sofa edges, bags, and open-pored seats. It does not apply color; it polishes. The 100 ml bottle is intended for individual spots, the 1000 ml \/ 1 liter container for ongoing maintenance.\u003c\/p\u003e\n\n\u003cp\u003eThe order on the shelf follows the order of work. Softener and softening agent stand before the actual repair, the scratch remover stands alongside as its own short path. Anyone who knows which of the three cases they are facing has already made half the decision.\u003c\/p\u003e\n\n\u003ch3\u003eWater-soluble or pure oil determines what will hold afterward\u003c\/h3\u003e\n\n\u003cp\u003eThe difference between leather softener and softening agent is not on the label. It is in the question of what comes after them.\u003c\/p\u003e\n\n\u003cp\u003eCOLOURLOCK \"Licker Oil\" is water-soluble and is therefore mixed: one part oil to four parts warm water until a milky solution is created. Water is the transport medium here — it seeps into the spaces between the fibers, takes the fat molecules with it, and subsequently evaporates. What remains is fat where it allows the fibers to slide against each other again. Practically speaking, this means the surface remains wettable, and the water-based leather color will hold later on.\u003c\/p\u003e\n\n\u003cp\u003eCOLOURLOCK \"Old Leather Softener\" takes the other path. It is pure oil, therefore greases significantly more effectively and reaches fibers that the diluted softener can no longer access. This is exactly why there are two products and not one: repair material adheres poorly to an oiled surface, so the softening agent strictly requires the \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-reinigung-entfetter\"\u003edegreaser\u003c\/a\u003e afterward, whereas the softener can hand off directly to the color application phase.\u003c\/p\u003e\n\n\u003cp\u003eCOLOURLOCK \"Scratch Away\" follows neither logic. It adds nothing to the leather that is meant to stay there, and it removes nothing either. On open-pored leathers, when a scuff occurs, the leather's own fats and waxes move to the side, causing the area to lighten — the same principle that gives these leathers their pull-up effect. The polish redistributes them until the area reflects light evenly again.\u003c\/p\u003e\n\n\u003cp\u003eFrom these operating principles follows an honest classification: none of the products is a substitute for another. The softener does not make rock-hard leather pliable, the softening agent does not prepare a surface for color, and the polish replaces neither the one nor the other. They solve three separate tasks that can occur side-by-side on the same seat.\u003c\/p\u003e\n\n\u003ch3\u003eOld leather becomes soft over days, not minutes\u003c\/h3\u003e\n\n\u003cp\u003eBoth oils work slowly. Anyone checking after ten minutes will consider a product ineffective that has only just begun to work.\u003c\/p\u003e\n\n\u003cp\u003eWith the leather softener, it works like this: mix, apply the milky solution evenly to the cleaned area, let it absorb. Two applications are usually sufficient. Afterward comes the part that almost everyone wants to shorten — several days at room temperature before dyeing or repairing. During this time, the oil first distributes itself into the fiber structure, and exactly this determines whether the leather will hold up under the sanding pad.\u003c\/p\u003e\n\n\u003cp\u003eThe softening agent is applied with a sponge or soft cloth, ideally from the back of the leather because there is no topcoat to hinder it. Afterward, at least 24 hours of rest at room temperature, then carefully move and knead the area. Up to three such rounds are intended. For a completely dried-out vehicle interior, you need no more than one liter for this.\u003c\/p\u003e\n\n\u003cp\u003eThe polish is the fastest part of the group: a small amount of product on a soft cloth, rub it into the leather surface, carefully polish out the scratch in a circular motion. As with all products in this group, a test on an inconspicuous area, such as the underside of the seat, applies beforehand — not just for color, but also for the feel, because you cannot see a change in haptics in a photo.\u003c\/p\u003e\n\n\u003cp\u003eWhen doing it for the first time, count on more calendar time than actual work time. A hardened seat from a vehicle that has been standing for a long time might occupy you for two hours spread over a week — the rest is waiting. Based on the inquiries we receive, this waiting time is exactly the point where most people lose patience and proceed too soon. This is not a question of skill; it is part of the process.\u003c\/p\u003e\n\n\u003ch3\u003eWith us, repair fails more often due to the leather type than the product\u003c\/h3\u003e\n\n\u003cp\u003eThe most frequent question about this group is not how to apply them. It is why they did nothing for the user's specific leather.\u003c\/p\u003e\n\n\u003cp\u003eIn most of these cases, the leather type does not match. COLOURLOCK \"Scratch Away\" is made, according to the manufacturer, for aniline, grease, oil, and nubuck leathers and expressly not for pigmented leathers. The reason lies in the mechanism: with pigmented smooth leather, the scratch is in the top layer, not in migrating fat — there is simply nothing there to be redistributed. For such areas, the path leads through \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-reparatur-fuellstoffe\"\u003efillers\u003c\/a\u003e and leather color.\u003c\/p\u003e\n\n\u003cp\u003eThe second limitation concerns very old leather. Replenishing fat makes the fibers more supple. It does not restore lost fiber stability. A parchment-like seat that cracks when bent will become softer after three applications but will still remain thin. We have seen this on furniture leather from the seventies: supple enough for dyeing, too weak for the seat surface. If the carrier fabric is also gone or the foam has broken, the segment belongs to a saddler.\u003c\/p\u003e\n\n\u003cp\u003eThe third limitation is self-imposed by many. Udder fat, cooking oil, and fabric softener appear in every forum thread about hard leather, and we see the results regularly: fats that are not tailored for leather absorb uncontrollably, turn rancid over time, and leave behind a greasy film. Before a color repair, this film is the worst conceivable starting point because it can only be removed again with multiple degreasing rounds.\u003c\/p\u003e\n\n\u003cp\u003eAnd one limitation lies in the sequence itself. Gaping cracks are closed before the softening agent is applied, not afterward — otherwise, you are working oil into an open fracture edge where the adhesive needs to hold later. Open-pored aniline leather, in turn, requires a suitable cleaner before polishing; the \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-reinigung-anilin-nubukreiniger\"\u003eAniline \u0026amp; Nubuck Cleaner\u003c\/a\u003e is ready for that.\u003c\/p\u003e\n\n\u003ch3\u003eYour leather type and damage determine the entry point\u003c\/h3\u003e\n\n\u003cp\u003eTwo moves are enough to decide: a drop of water on an inconspicuous area and a fingernail over the damaged surface.\u003c\/p\u003e\n\n\u003cp\u003eIf the drop soaks in and darkens the spot, you are dealing with open-pored leather. If the damage there is only a light scuff without the fingernail getting caught, COLOURLOCK \"Scratch Away\" is all the effort required — clean, polish out, done. If the drop beads up, the leather is coated, and for a scratch, the work instead starts with filler and color.\u003c\/p\u003e\n\n\u003cp\u003eIf the leather feels dry and dull and is to be dyed or repaired afterward, COLOURLOCK \"Licker Oil\" is the entry point. If it cracks when bending or feels like parchment, start one step earlier and work it soft over several days with COLOURLOCK \"Old Leather Softener\". Brittle leather that you fill without this step will tear again next to the repair site.\u003c\/p\u003e\n\n\u003cp\u003eAfterward, the next station takes over. Degrease, prime, dye, seal — everything for this is available under \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-faerben\"\u003eDyeing \u0026amp; Finish\u003c\/a\u003e, which makes the pre-treated surface ready for color in the first place. The remaining steps of the line, from adhesive to putty, can be found one level higher: \u003ca href=\"\/it\/collections\/koch-chemie-colourlock-reparatur\"\u003eBack to COLOURLOCK repair\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe idea that holds this group together is uncomfortable: you never see what you gain during pre-treatment. No photo shows it, no customer praises it. Visible is only what would have happened without it — a freshly dyed bolster that rubs off after two weeks, or a crack that opens a second time ten millimeters next to the repair. The days you lose here are the months the repair will last later.\u003c\/p\u003e\n","products":[{"product_id":"koch-chemie-colourlock-old-leather-softener-weichmacher-verhartetes-altes-leder","title":"COLOURLOCK \"Old Leather Softener\" ammorbidente per pelle vecchia indurita","description":"\u003ch2\u003eCOLOURLOCK Old Leather Softener — ammorbidente in profondità per pelle vecchia dura e fragile\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eCosa fa il COLOURLOCK Old Leather Softener? — L'ammorbidente penetra a fondo nella pelle vecchia indurita, le ridà flessibilità, riduce il rischio di rotture e prepara bene il materiale per le successive fasi di cura o riparazione.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eIl \u003cstrong\u003eCOLOURLOCK Old Leather Softener\u003c\/strong\u003e è la risposta pro quando una pelle vecchia, secca o fragile deve tornare morbida e flessibile. Su auto d'epoca, mobili vintage, selle o pelli lisce lasciate ferme per anni, il materiale perde piano piano la sua elasticità naturale delle fibre. L'ammorbidente porta grassi e sostanze ammorbidenti dritti negli strati più profondi della pelle, abbassa il rischio di rottura e crea una base solida per riparazioni, cura e lavori di colore. Old Leather Softener lavora lento ma duraturo — perfetto per ogni pelle diventata rigida che potrebbe strapparsi sotto tensione.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRidà morbidezza in profondità\u003c\/strong\u003e – Penetra nelle fibre indurite e migliora nettamente il modo in cui la pelle si muove.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbbassa il rischio di rotture e crepe\u003c\/strong\u003e – Ideale prima di un ravvivante di colore o di una riparazione, così le zone fragili tengono meglio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndispensabile su pelle d'epoca, di mobili \u0026amp; vintage\u003c\/strong\u003e – Perfetto per pelli lisce a lungo trascurate o secche come un cracker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eTecnologia ammorbidente \u0026amp; come agisce sulla pelle vecchia\u003c\/h3\u003e\n\u003cp\u003eL'\u003cstrong\u003eOld Leather Softener\u003c\/strong\u003e unisce grassi ad alta azione e sostanze nutrienti che penetrano lentamente nelle strutture di collagene della pelle. Con l'età le fibre della pelle perdono umidità interna e flessibilità; si induriscono, e questo può portare a micro-rotture, rigidità e crepe. L'ammorbidente scioglie questa rigidità secca passo dopo passo, rendendo le fibre più morbide e riportando un movimento naturale. Secondo il produttore lavora in profondità senza lasciare la pelle unta né rendere la superficie irregolare. Dato che la pelle vecchia è spesso molto indebolita, l'ammorbidente fa da ricostruzione della struttura interna, prima ancora di pensare alle riparazioni.\u003c\/p\u003e\n\u003ch3\u003ePreparazione, applicazione \u0026amp; routine ottimale di ammollo\u003c\/h3\u003e\n\u003cp\u003ePrima di iniziare, la pelle deve essere pulita e completamente asciutta. L'\u003cstrong\u003eOld Leather Softener\u003c\/strong\u003e lo passi in abbondanza ma con controllo, con un pennello, un panno o una spugnetta. L'effetto non è immediato, ma arriva pian piano: la pelle assorbe il prodotto nell'arco di ore o giorni, a seconda di quanto è secca. Sulle zone molto dure conviene muovere un po' la pelle, così l'ammorbidente penetra più a fondo. Possono servire passate ripetute a distanza di 24 ore finché non raggiungi la morbidezza che vuoi. Solo quando la pelle è diventata visibilmente più morbida e flessibile, fai seguire colore, riparazioni o prodotti di cura, così non falliscono su una superficie fragile.\u003c\/p\u003e\n\u003ch3\u003eRisultati, dove si usa \u0026amp; differenza con i prodotti di cura\u003c\/h3\u003e\n\u003cp\u003eDopo la fase di ammollo, la pelle vecchia risulta molto più flessibile, meno fragile e mostra una struttura di fibre più stabile. Questo riduce il rischio che nascano nuove crepe quando ci si siede, la si sfiora o la si lavora. L'\u003cstrong\u003eOld Leather Softener\u003c\/strong\u003e è adatto a sedili in pelle d'epoca, mobili, selle da moto, pelletteria antica e a ogni punto in cui la pelle si è seccata nel corso dei decenni. Non sostituisce creme di cura o preparatori di colore: quelli entrano in gioco solo dopo la fase di ammorbidimento. L'ammorbidente serve solo al recupero strutturale — i ritocchi di colore aspettano che la pelle sia abbastanza elastica da reggerli a lungo.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDomande frequenti sul COLOURLOCK Old Leather Softener\u003c\/h2\u003e\n\u003ch4\u003eQuanto tempo ci mette l'ammorbidente ad agire?\u003c\/h4\u003e\n\u003cp\u003eDa diverse ore a giorni, a seconda di quanto è secca. La pelle vecchia richiede spesso più passate.\u003c\/p\u003e\n\u003ch4\u003ePosso usarlo su tutti i tipi di pelle?\u003c\/h4\u003e\n\u003cp\u003eSu tutte le pelli lisce sì. Non adatto a nabuk o camoscio.\u003c\/p\u003e\n\u003ch4\u003eL'ammorbidente scurisce la pelle?\u003c\/h4\u003e\n\u003cp\u003eLeggermente possibile, soprattutto su pelli molto secche. L'effetto di solito si riequilibra dopo la cura.\u003c\/p\u003e\n\u003ch4\u003ePosso tingere subito dopo l'ammorbidente?\u003c\/h4\u003e\n\u003cp\u003eSolo quando la pelle è di nuovo flessibile e non ha più eccessi d'olio. Solo allora il colore tiene in modo affidabile.\u003c\/p\u003e\n\u003ch4\u003eCome capisco se è penetrato abbastanza ammorbidente?\u003c\/h4\u003e\n\u003cp\u003eLa pelle si piega di nuovo senza scricchiolare e si sente nettamente più morbida.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eUltimo aggiornamento: 02.12.2025 — Autore: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56541632233807,"sku":"D1-KCX-533-1L-01","price":41.99,"currency_code":"EUR","in_stock":true},{"title":"250ml","offer_id":56541632266575,"sku":"D1-KCX-533-250ML-01","price":17.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/533-1L-01_1.png?v=1764713850"},{"product_id":"koch-chemie-colourlock-scratch-away-spezialprodukt-kratzer-entferner-leder","title":"COLOURLOCK \"Scratch Away\" prodotto speciale per rimuovere graffi leggeri superficiali nella pelle","description":"\u003ch2\u003eCOLOURLOCK Scratch Away — rimuovi graffi per pelle liscia\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eCosa fa COLOURLOCK Scratch Away? — Il detergente speciale leviga e lucida graffi leggeri, abrasioni e segni di sfregamento chiari sulla pelle liscia senza stendere colore, e riporta in vita la superficie naturale.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK Scratch Away\u003c\/strong\u003e è la soluzione pratica per graffi leggeri, abrasioni superficiali e segni d'uso chiari sulla pelle liscia pigmentata. Invece di stendere colore o filler, Scratch Away lavora con un processo di lucidatura e levigatura messo a punto con precisione: lo strato superiore della pelle viene livellato con delicatezza, così i piccoli danni da sfregamento spariscono alla vista. Ideale per pelle auto, mobili, borse, scarpe e ogni tipo di pelle liscia con i soliti segni d'uso.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRimuove graffi leggeri \u0026amp; abrasioni\u003c\/strong\u003e – Senza ricolorare, un miglioramento che vedi subito.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeviga la superficie\u003c\/strong\u003e – Smorza i segni di sfregamento chiari con una micro-lucidatura mirata.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFacile \u0026amp; veloce da passare\u003c\/strong\u003e – Perfetto per i fianchetti dei sedili, i volanti, i bordi dei mobili \u0026amp; gli accessori.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eMeccanismo d'azione \u0026amp; tecnologia di levigatura\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eScratch Away\u003c\/strong\u003e usa micro-abrasivi fini e additivi nutrienti che livellano appena lo strato superiore della pelle, senza toccare lo strato di colore. È così che spariscono i graffi leggeri, le zone lucide chiare o i segni di sfregamento dovuti agli abiti, all'attrito o all'uso. L'effetto non sta nel colore ma in una correzione della superficie controllata. Il prodotto dà il meglio proprio dove lo strato di colore è ancora intatto ma la pelle sembra stanca.\u003c\/p\u003e\n\u003ch3\u003eApplicazione, stesura \u0026amp; best practice\u003c\/h3\u003e\n\u003cp\u003ePrima di iniziare la pelle deve essere pulita e completamente asciutta. Metti un po' di \u003cstrong\u003eScratch Away\u003c\/strong\u003e su un panno morbido e lo lavori con delicatezza sul punto rovinato con movimenti circolari. L'effetto lucidante parte subito e la superficie diventa visibilmente più liscia e uniforme. Se serve, ci ripassi finché i segni di sfregamento spariscono o calano nettamente. Per chiudere, conviene curare o sigillare la pelle con Leather Shield per fissare il risultato.\u003c\/p\u003e\n\u003ch3\u003eRisultati, campi d'uso \u0026amp; limiti del prodotto\u003c\/h3\u003e\n\u003cp\u003eDopo il trattamento la pelle appare più uniforme, più liscia e più fresca. \u003cstrong\u003eScratch Away\u003c\/strong\u003e è ottimo per sedili auto, mobili, borse, scarpe e tutte le pelli lisce pigmentate. Non è un filler e non sostituisce una correzione di colore su graffi profondi o danni. Il detergente lavora al meglio su segni di sfregamento superficiali, abrasioni leggere e strisciate, ma non su tagli passati a fondo o perdita di materiale.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDomande frequenti su COLOURLOCK Scratch Away\u003c\/h2\u003e\n\u003ch4\u003eCon Scratch Away si possono togliere tutti i graffi?\u003c\/h4\u003e\n\u003cp\u003eSolo graffi leggeri e superficiali. Per i danni profondi serve un filler o Leather Fresh.\u003c\/p\u003e\n\u003ch4\u003eScratch Away funziona su ogni pelle?\u003c\/h4\u003e\n\u003cp\u003eSulla pelle liscia pigmentata sì. Non adatto ad anilina, nabuk o scamosciato.\u003c\/p\u003e\n\u003ch4\u003eScratch Away cambia il colore?\u003c\/h4\u003e\n\u003cp\u003eNo. Lucida solo la superficie e mantiene lo strato di colore originale.\u003c\/p\u003e\n\u003ch4\u003eQuante volte posso usare il prodotto?\u003c\/h4\u003e\n\u003cp\u003ePiù volte, finché lavori con delicatezza. Toglie solo strati minimi di materiale.\u003c\/p\u003e\n\u003ch4\u003ePosso curare o sigillare dopo?\u003c\/h4\u003e\n\u003cp\u003eSì, Leather Shield o una cura adatta fissa il risultato.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eUltimo aggiornamento: 08.12.2025 — Autore: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56584288600399,"sku":"D1-KCX-621-1L-01","price":79.99,"currency_code":"EUR","in_stock":true},{"title":"100ml","offer_id":56584288665935,"sku":"D1-KCX-621-100ML-01","price":31.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/621-1L-01_1.png?v=1765302002"},{"product_id":"koch-chemie-colourlock-licker-oil-rueckfetter-ledervorbereitung","title":"COLOURLOCK \"Licker Oil\" ingrassante per preparare la pelle prima della riparazione professionale","description":"\u003ch2\u003eCOLOURLOCK Licker Oil — ingrassante per la preparazione pro della pelle\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eA cosa serve COLOURLOCK Licker Oil? — L'ingrassante rende di nuovo morbida la pelle secca, dura o fragile, rinforza le fibre e migliora la preparazione per riparazioni, riempimenti e applicazione del colore.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK Licker Oil\u003c\/strong\u003e è l'ingrassante professionale per preparare pelle invecchiata, seccata o indurita. Sedili auto molto sollecitati, superfici di mobili fragili, vecchie borse o parti di sella traggono tutti vantaggio dall'ingrassaggio profondo che rimette in flessibilità le fibre della pelle. Licker Oil fa sì che i materiali da riparazione come filler, binder o colore per pelle facciano più presa e si stendano in modo più uniforme. Un passaggio decisivo se vuoi risultati duraturi su pelle indebolita a livello strutturale.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngrassaggio in profondità\u003c\/strong\u003e – Rimette in morbidezza la pelle dura e secca e riduce il rischio di crepe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemplifica il lavoro di riparazione\u003c\/strong\u003e – Migliora presa e stesura di filler, binder e colore.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeale per pelle invecchiata\u003c\/strong\u003e – Perfetto per automotive, mobili, selle, borse \u0026amp; accessori.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eTecnologia di ingrassaggio \u0026amp; come agisce nella pelle\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLicker Oil\u003c\/strong\u003e penetra in profondità nella struttura della pelle e riattiva le fibre seccate che negli anni hanno perso elasticità. I componenti ingrassanti si depositano negli spazi tra le fibre e ripristinano la morbidezza naturale, senza scurire troppo la pelle. Soprattutto sulle pelli automotive più vecchie diventate fragili, l'ingrassante abbassa il rischio di crepe durante i lavori di riparazione meccanici. Le fibre diventano più flessibili e più ricettive, e questo rende l'intera riparazione più stabile e più duratura.\u003c\/p\u003e\n\u003ch3\u003ePreparazione, applicazione \u0026amp; il modo migliore prima delle riparazioni\u003c\/h3\u003e\n\u003cp\u003ePrima di applicarlo, prepara bene la pelle con un detergente adatto così che i componenti ingrassanti penetrino in modo uniforme. Passi \u003cstrong\u003eLicker Oil\u003c\/strong\u003e in uno strato sottile e lo fai penetrare massaggiando con una leggera pressione. Dopo un breve tempo di posa l'olio penetra in profondità e lascia una superficie nettamente più morbida. A seconda dello stato della pelle, puoi ripetere il procedimento. Solo quando la pelle è di nuovo flessibile parti con la riparazione strutturale: livellare il filler, applicare il colore, sigillare la superficie. Licker Oil migliora nettamente ogni passaggio successivo.\u003c\/p\u003e\n\u003ch3\u003eRisultati, impieghi \u0026amp; differenza con un ammorbidente\u003c\/h3\u003e\n\u003cp\u003eDopo il trattamento la pelle risulta molto più morbida, più elastica e più ricettiva a prodotti come filler, binder o colore. \u003cstrong\u003eLicker Oil\u003c\/strong\u003e è perfetto per pelle vecchia, secca o fragile su veicoli, mobili, borse, giacche e selle. A differenza di un ammorbidente come Old Leather Softener, Licker Oil lavora più come preparazione ingrassante e meno come flessibilizzazione a lungo termine. È il primo passo ideale prima di interventi di riparazione importanti, dove stabilità e morbidezza fanno la differenza.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDomande frequenti su COLOURLOCK Licker Oil\u003c\/h2\u003e\n\u003ch4\u003eQuando uso Licker Oil?\u003c\/h4\u003e\n\u003cp\u003ePrima delle riparazioni, quando la pelle è dura, secca o fragile e deve tornare flessibile.\u003c\/p\u003e\n\u003ch4\u003eLicker Oil scurisce la pelle?\u003c\/h4\u003e\n\u003cp\u003eSolo in minima parte. L'effetto è molto inferiore rispetto a tanti oli classici.\u003c\/p\u003e\n\u003ch4\u003ePosso riparare subito dopo?\u003c\/h4\u003e\n\u003cp\u003eSì, appena l'olio è penetrato e la superficie sembra asciutta.\u003c\/p\u003e\n\u003ch4\u003eVa bene per tutti i tipi di pelle?\u003c\/h4\u003e\n\u003cp\u003eIdeale per pelle pigmentata, pelle liscia coperta e molte pelli da sella e da mobile.\u003c\/p\u003e\n\u003ch4\u003eMi serve anche un ammorbidente?\u003c\/h4\u003e\n\u003cp\u003eSolo con pelle molto dura e fragile – allora combina Licker Oil e Old Leather Softener.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eUltimo aggiornamento: 09.12.2025 — Autore: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56584343814479,"sku":"D1-KCX-618-1L-01","price":48.99,"currency_code":"EUR","in_stock":true},{"title":"250ml","offer_id":56584343847247,"sku":"D1-KCX-618-250ML-01","price":23.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/618-1L-01_1.png?v=1765302805"}],"url":"https:\/\/detailing1.co\/it\/collections\/koch-chemie-colourlock-reparatur-vorbehandlung.oembed","provider":"Detailing1","version":"1.0","type":"link"}