{"product_id":"dr-wack-a1-leder-pflege-lederpflege","title":"A1 \"Leder-Pflege\" cura pelle","description":"\u003ch2 id=\"speakable-headline\"\u003eDr. Wack A1 \"Leather Care\" keeps the top layer supple and slows down cracking\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n\n\u003cp\u003e\u003cem\u003eWhat is Dr. Wack A1 \"Leather Care\"? A solvent-free care film based on jojoba oil that can be used on any type of smooth leather and synthetic leather, including perforated seats. It keeps the top layer supple, protects against fading from UV rays, and makes water bead off. Not a cleaner, not a sealant, and not for suede.\u003c\/em\u003e\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eDr. Wack A1 \"Leather Care\"\u003c\/strong\u003e is a leather care product from Dr. Wack based on jojoba oil for smooth leather and synthetic leather in vehicles. It applies a thin film to the top layer and keeps it supple. In doing so, it works against the problem Dr. Wack describes in its product information sheet: heat, moisture, UV radiation, and dirt make leather brittle and cracked.\u003c\/p\u003e\n\n\u003cp\u003eThe active ingredient has \"oil\" in its name, but chemically it is not one. Jojoba oil is a liquid wax, an ester of long-chain fatty acids and fatty alcohols that largely lacks the unsaturated sites where oxygen typically attacks. This is exactly what Dr. Wack relies on for its claim of temperature and aging resistance. For you, this means: the film will not turn rancid or sticky over the course of months, unlike fat-based household remedies on a leather seat.\u003c\/p\u003e\n\n\u003cp\u003eThe second half of the answer lies in the substrate. On modern automotive leather, a polyurethane top layer sits above the dyed skin—a wafer-thin lacquer layer that provides color and abrasion resistance. Oil cannot penetrate this. You can tell because whatever looks darker and richer after application is not soaked skin, but a surface kept supple, which, according to the manufacturer, restores color depth without becoming shiny.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSuppleness and cracks were measured in the laboratory.\u003c\/strong\u003e The sheet mentions two effects that go hand-in-hand: the care prevents crack formation and stops existing cracks from growing. In March 2014, the GTÜ tested exactly this aspect using standardized procedures for wrinkling, suppleness, and impregnation protection, involving pressure loading, rolling, and water wetting. The result for the cleaner and care combination: 239 out of 300 points, 1st place out of 10.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBeading on the seat, not just on the paint.\u003c\/strong\u003e Dr. Wack states that the film protects against dirt and makes water bead off. On leather, this means the same as on paint: the drop remains a sphere instead of soaking in. Because automotive leather is 99.9 percent surface-dyed smooth leather, this top layer determines whether a coffee spill is easily wiped away or needs to be worked out later.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e250 ml, and the sheet insists on sparse use.\u003c\/strong\u003e Applying evenly and sparingly is not just a phrase, but the instruction manual: whatever the top layer does not absorb remains as a film and becomes greasy. Dr. Wack does not provide a coverage rate per bottle. We therefore work in palm-sized sections and wipe each one down with the dry side of the cloth.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n\n\u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e \"Leave to act depending on the absorbency of the leather\" is all Dr. Wack writes about application time. From our experience, this becomes a clear instruction: apply a palm-sized test area to the driver's side bolster and check it after 1 minute. If the shine is gone, the leather has absorbed it and can handle a second thin application. If it is still shiny, the top layer is saturated, and the rest should be removed immediately with the dry side of the cloth.\u003c\/p\u003e\n\n\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eEvery leather zone absorbs differently, the driver's side bolster the most\u003c\/h3\u003e\n\n\u003cp\u003eThe Leather Care is applied sparingly to a soft cloth, never directly to the surface, and distributed on cleaned, dry leather in palm-sized sections.\u003c\/p\u003e\n\n\u003cp\u003eThe bottle should be shaken beforehand, otherwise the wax will settle at the bottom. Dr. Wack recommends a soft, absorbent cloth, a fine-pored sponge, or their own \u003ca href=\"\/it\/products\/dr-wack-a1-all-in-one-mikrofasertuch-mikrofasertuch\"\u003eA1 \"ALL in ONE\" microfiber cloth\u003c\/a\u003e as an application tool. All three do the same thing: they dose the product. A cloth dispenses exactly as much as you have put into it and picks it back up at the end with the second, dry side.\u003c\/p\u003e\n\n\u003cp\u003eThe surface determines how much of it disappears. On the entry bolster of the driver's seat, the top layer is under the most stress; jeans rub over it every time you get in. This zone absorbs noticeably more than the back seat, which remains almost untouched for years in many cars. Anyone treating both the same will have too little product in the front and a film in the back that looks dusty after two days.\u003c\/p\u003e\n\n\u003cp\u003eBetween applying and wiping off, there is a short venting phase, and that lasts exactly as long as the leather needs. For a smooth, well-maintained Nappa surface, this is a matter of seconds. For a matte, already roughened bolster, it can take 1 minute. The absorption test from the practical tip answers this faster than any rule of thumb because it measures the answer on the vehicle instead of estimating it.\u003c\/p\u003e\n\n\u003cp\u003eHeat is a different kind of problem for a care product than it is for a cleaner. On a heated surface, the film settles where it lands and cannot be spread out evenly anymore. What results are clouds instead of a uniform layer. That is why Dr. Wack rules out direct sunlight and heated surfaces. Shade, open doors, 10 minutes of patience.\u003c\/p\u003e\n\n\u003cp\u003ePerforated seats require the flat hand. What is pushed into a row of holes does not dry through, and underneath sits foam that absorbs what gets through. The approval for perforated leather applies under exactly this condition. On the steering wheel rim, work even thinner than usual and polish with the dry side until the grip is matte again.\u003c\/p\u003e\n\n\u003ch3\u003eNew automotive leather does not need re-fattening, it needs protection\u003c\/h3\u003e\n\n\u003cp\u003ePigmented automotive leather cannot be \"fed.\" The closed top layer over it does not allow fats to penetrate into the fiber, which is why every care product works on this layer and not inside the hide.\u003c\/p\u003e\n\n\u003cp\u003eThe Lederzentrum, for decades the go-to address for leather repair, puts it clearly: in the first three years, automotive leather does not need re-fattening; it is still optimally equipped by the tanner. What it needs is protection against wear and color transfer from clothing. Anyone trying to re-fatten three-year-old automotive leather is effectively waxing a rain jacket: the material is coated, and the cream stays on the outside.\u003c\/p\u003e\n\n\u003cp\u003eThis is exactly where the strength of this product lies, and exactly where its first limit is. The A1 \"Leather Care\" is a protective film, not a nutrient. It keeps the top layer elastic, applies a water-repellent layer on top, and takes on the abrasion that would otherwise hit the color layer. For leather that has truly dried out after fifteen years, it does not replace a re-fattening care milk.\u003c\/p\u003e\n\n\u003cp\u003eThe second limit is more harmless to name and more expensive to ignore. Where the top layer has been worn through and the light-colored substrate is showing, no care film will bring back the color. That is a case for leather repair with color application, not a bottle. The care product slows down the path to that point; it does not reverse it.\u003c\/p\u003e\n\n\u003cp\u003eThe third limit is where the manufacturer remains silent. Dr. Wack does not specify anywhere how many months the film lasts, and we will not invent a number. What can be said: it is a care product, not a coating. Anyone looking for a multi-year service life is looking for a leather sealant, and that is a different product with different preparation.\u003c\/p\u003e\n\n\u003cp\u003eThe fourth is on the bottle: suede, nubuck, and Alcantara are excluded because there is no closed film there that can be cared for in this way. A simple rule applies for your choice: if your leather is young, pigmented, and intact, protection is the right task and A1 \"Leather Care\" is the right bottle. If it is old, matte, and truly brittle, reach for a re-fattening care milk in the \u003ca href=\"\/it\/collections\/lederpflege\"\u003eleather care\u003c\/a\u003e category.\u003c\/p\u003e\n\n\u003ch3\u003eThe driver's seat needs care four times as often as the back seat\u003c\/h3\u003e\n\n\u003cp\u003eDr. Wack does not name a maintenance interval. We work with twice a year for the entire leather interior and significantly more often for the driver's seat and steering wheel.\u003c\/p\u003e\n\n\u003cp\u003eThe figures behind this come from two directions and coincide. Our internal routine at Detailing101 provides for thorough cleaning every 2 to 3 months and care twice a year. The Lederzentrum recommends caring for the driver's seat every 3 months for new leather and the rest of the leather every 6 to 12 months. Both lead to the same ratio: the seat surface you use daily consumes the protection many times faster than the back seat.\u003c\/p\u003e\n\n\u003cp\u003eA1 \"Leather Care\" is therefore right for vehicles with pigmented smooth leather or synthetic leather that are still intact and should remain so. It is particularly useful for light-colored interiors, where indigo abrasion from dark jeans appears first on the driver's bolster, and for ventilated or heated seats with perforation, where many competing products with spray heads are disqualified.\u003c\/p\u003e\n\n\u003cp\u003eIt is wrong for vehicles with Alcantara interiors, for open-pored aniline leather, and for anyone expecting a coating that only needs to be applied once a year. Anyone who wants their leather clean beforehand—and the manufacturer explicitly demands this—takes the \u003ca href=\"\/it\/products\/dr-wack-a1-leder-reiniger-lederreiniger\"\u003eA1 \"Leather Cleaner\"\u003c\/a\u003e as the first step. Care applied to a still-greasy top layer sits on the dirt rather than the leather.\u003c\/p\u003e\n\n\u003cp\u003eRegarding the container: 250 ml from a plastic bottle, manufactured at Dr. O.K. Wack Chemie in Baar-Ebenhausen. Because the cloth doses rather than a spray head, the amount lasts longer than the number might suggest. This cannot be proven, as no yield information exists either on the bottle or in the product information sheet, and we do not write down estimated numbers.\u003c\/p\u003e\n\n\u003cp\u003eThe most important lever in the end is not the quantity, but the timing. Dr. Wack names heat and UV radiation as two of the drivers that make leather brittle, and both have their season. Care applied in October has already passed the stress it is meant to work against. We therefore schedule the main appointment in the spring, before the interior behind glass gets really hot for the first time, and follow up with a second one in late summer.\u003c\/p\u003e","brand":"Dr. Wack \"A1\"","offers":[{"title":"250ml","offer_id":54707189809487,"sku":"D1-DRW-2510","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/dr-wack-a1-leder-pflege-lederpflege_d41586a1-ba5b-496a-8da0-00a2f613e764.png?v=1787867280","url":"https:\/\/detailing1.co\/it\/products\/dr-wack-a1-leder-pflege-lederpflege","provider":"Detailing1","version":"1.0","type":"link"}