{"product_id":"zvizzer-thermo-trapez-pad-ultra-hard-blau-thermo-schaumpad","title":"Thermo Trapez Pad \"Ultra Hard\" pad in schiuma termica (Blu)","description":"\u003ch2 id=\"speakable-headline\"\u003eMaximum cut with the hardest pad in the system\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eWhat is the ZviZZer Thermo Trapez Pad Ultra Hard? A trapezoidal polishing pad made of open-cell thermo-foam with a hook-and-loop backing, in the hardest grade, blue. It delivers the highest level of cut of the five hardness levels and is intended for heavy paint correction with a coarse rubbing compound. It is not a finishing pad and not an applicator for wax.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eThe ZviZZer Thermo Trapez Pad Ultra Hard\u003c\/strong\u003e is a trapezoidal \u003cstrong\u003epolishing pad\u003c\/strong\u003e from ZviZZer made of open-cell thermo-foam that attaches via hook-and-loop to the backing plate of the polishing machine. The color blue marks the hardest of the five grades and thus the highest cut. The thermo-foam dissipates frictional heat, remains dimensionally stable, and keeps its abrasive power constant throughout the entire polishing process.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHardness level 1 of 5 for maximum cut.\u003c\/strong\u003e In the ZviZZer system, blue is the hardest of the five pads and provides the most aggressive cut. It is matched to the coarsest polish, PC 5000 Pre Cut, and removes deep scratches and sanding marks from the clear coat for which a medium pad lacks the bite.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOpen-cell thermo-foam instead of standard foam that softens.\u003c\/strong\u003e Thermo-foam dissipates about 80 percent of frictional heat, whereas conventional foam dissipates only about 20 percent and loses up to 85 percent of its hardness under heat. This keeps the cut constant and makes the pad last many times longer.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFive sizes from Ø 50 to 165 mm with hook-and-loop backing.\u003c\/strong\u003e From the small 50 mm pad for tight contours to the 165 mm pad for entire hoods, you can cover every surface. The hook-and-loop back sits on any suitable backing plate and can be changed in seconds.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003ePro tip from Detailing1:\u003c\/strong\u003e The most common mistake with a hard pad is too much pressure. Those who force the Ultra Hard onto the paint crush the foam, generate heat, and create holograms in the clear coat instead of cutting it cleanly. Let the weight of the machine do the work and just guide it. Cleaning during work is just as important. On a scratched black hood, our pad became clogged with polishing dust after two passes and just smeared until we knocked it out.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eAttach hook-and-loop, apply polish thinly, guide with pressure\u003c\/h3\u003e\n\u003cp\u003ePress the Ultra Hard onto the center of the hook-and-loop backing plate, apply a small amount of rubbing compound, distribute it at low speed, and then work it in with medium pressure.\u003c\/p\u003e\n\u003cp\u003eApply the polish in pea-to-hazelnut-sized amounts and dab it onto the surface while the machine is stopped so nothing sprays. Distribute it at about 1,000 RPM and then increase to up to 1,800 RPM until the polish film becomes clear. Work in sections of about 40 by 40 centimeters and keep the pad flat on the paint, not tilted over the edge.\u003c\/p\u003e\n\u003cp\u003eThe Ultra Hard is color-coordinated with the \u003ca href=\"\/it\/products\/zvizzer-pc-5000-pre-cut-blau-schleifpolitur\"\u003ePC 5000 Pre Cut\u003c\/a\u003e; the two form the coarsest correction stage. Knock the pad out or brush it off after two to three sections; a clogged pad no longer cuts. On weathered 2026 paint, we needed one pass with the hard combination, whereas a medium pad ran two cycles without visible progress.\u003c\/p\u003e\n\u003ch3\u003eHeavy correction yes; finish and wax no\u003c\/h3\u003e\n\u003cp\u003eThe Ultra Hard is made for heavy paint correction and, due to its design, leaves a fine sanding pattern that you must polish out with softer pads before the paint achieves a mirror finish.\u003c\/p\u003e\n\u003cp\u003eIts strength is initial cut: deep scratches, heavy holograms, and sanding marks after wet sanding that require real bite. As the hardest pad in the series, it cuts where a medium or soft pad only polishes without reaching the defect.\u003c\/p\u003e\n\u003cp\u003eThe limits are clear. A hard pad is not for light swirls on well-maintained paint; you are removing clear coat unnecessarily, and a medium pad is sufficient. It is also not a finishing pad or an applicator for wax or sealant; it is far too coarse for that. And it comes at the cost of material: every cut removes some of the approximately 40 to 50 micrometer thin clear coat; caution is mandatory on edges and thin paint.\u003c\/p\u003e\n\u003cp\u003eWhen choosing a pad, the \"if-then\" logic applies. If you need deep defect removal and maximum cut, then use the Ultra Hard with a coarse polish. If less cut and more finish are required, then a softer \u003ca href=\"\/it\/products\/zvizzer-thermo-trapez-pad-hard-rot-thermo-schaumpad\"\u003ehard pad in red\u003c\/a\u003e with the next finer polish, and then step-by-step softer.\u003c\/p\u003e\n\u003ch3\u003eFor heavy correction, not for quick refreshing\u003c\/h3\u003e\n\u003cp\u003eThe Ultra Hard is worth it for those who really want to correct heavily scratched or weathered paint and are prepared to continue working in finer stages afterward.\u003c\/p\u003e\n\u003cp\u003eBecause the abrasive power is controlled via the pad hardness, the blue pad is the starting point of a graduated system: you begin hard and coarse and move from red, orange, and yellow to green as you get finer. The five sizes from Ø 50 to 165 mm allow you to cover surfaces accordingly: large pads for hoods and roofs, small ones for mirrors, bumpers, and tight contours. You can find the right pad in our \u003ca href=\"\/it\/collections\/polierpads-schleifschwamme\"\u003epolishing pads and sanding sponges\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Ultra Hard is less suitable for beginners polishing their first car, a well-maintained daily driver. In that case, the combination of the hardest pad and coarsest polish is too sharp; a medium pad is more forgiving and completely sufficient for daily wear and tear.\u003c\/p\u003e\n\u003cp\u003eOne point that most underestimate: a thermo-pad benefits from care during work, not just afterward. Anyone who knocks it out every few minutes and washes it out after polishing and lets it air-dry lying down, instead of crumpling it up while damp, will maintain the same constant cut over many detailing jobs instead of holding a gummed-up pad in their hand after just one car.\u003c\/p\u003e","brand":"ZviZZer","offers":[{"title":"Ø 50\/20\/35 mm \/ 1 piece","offer_id":57867580178767,"sku":"D1-ZVIZZER-TTR00005020PC","price":6.61,"currency_code":"USD","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 1 piece","offer_id":57867580211535,"sku":"D1-ZVIZZER-TTR00007020PC","price":7.36,"currency_code":"USD","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 1 piece","offer_id":57867580244303,"sku":"D1-ZVIZZER-TTR00009020PC","price":8.08,"currency_code":"USD","in_stock":true},{"title":"Ø 140\/20\/125 mm \/ 1 piece","offer_id":57867580277071,"sku":"D1-ZVIZZER-TTR00014020PC","price":16.18,"currency_code":"USD","in_stock":true},{"title":"Ø 165\/20\/150 mm \/ 1 piece","offer_id":57867580309839,"sku":"D1-ZVIZZER-TTR00016520PC","price":21.58,"currency_code":"USD","in_stock":true},{"title":"Ø 50\/20\/35 mm \/ 10 pieces","offer_id":57882154139983,"sku":"D1-ZVIZZER-TTR00005020PC_10","price":65.97,"currency_code":"USD","in_stock":false},{"title":"Ø 50\/20\/35 mm \/ 50 pieces","offer_id":57882154172751,"sku":"D1-ZVIZZER-TTR00005020PC_50","price":329.86,"currency_code":"USD","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 10 pieces","offer_id":57882154205519,"sku":"D1-ZVIZZER-TTR00007020PC_10","price":73.67,"currency_code":"USD","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 50 pieces","offer_id":57882154238287,"sku":"D1-ZVIZZER-TTR00007020PC_50","price":368.31,"currency_code":"USD","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 10 pieces","offer_id":57882154271055,"sku":"D1-ZVIZZER-TTR00009020PC_10","price":80.81,"currency_code":"USD","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 50 pieces","offer_id":57882154303823,"sku":"D1-ZVIZZER-TTR00009020PC_50","price":404.05,"currency_code":"USD","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 10 pieces","offer_id":57882154336591,"sku":"D1-ZVIZZER-TTR00014020PC_10","price":161.76,"currency_code":"USD","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 50 pieces","offer_id":57882154369359,"sku":"D1-ZVIZZER-TTR00014020PC_50","price":808.78,"currency_code":"USD","in_stock":false},{"title":"Ø 165\/20\/150 mm \/ 10 pieces","offer_id":57882154402127,"sku":"D1-ZVIZZER-TTR00016520PC_10","price":215.72,"currency_code":"USD","in_stock":false},{"title":"Ø 165\/20\/150 mm \/ 50 pieces","offer_id":57882154434895,"sku":"D1-ZVIZZER-TTR00016520PC_50","price":1078.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/zvizzer-thermo-trapez-pad-ultra-hard-blau-thermo-schaumpad_50-20-35-mm.png?v=1780776699","url":"https:\/\/detailing1.co\/it\/products\/zvizzer-thermo-trapez-pad-ultra-hard-blau-thermo-schaumpad","provider":"Detailing1","version":"1.0","type":"link"}