Dr. Wack "P21S" P21S "Drukspuit" Drukspuit 1 stuk

Apply P21S Wheel Cleaner cleanly and evenly from the refill container

The P21S Pressure Sprayer is an application accessory for P21S wheel cleaners from refill containers. It applies the gel to the wheel in seconds with a wide spray pattern. It is not a cleaner itself and is not suitable for solvent-based or aggressive products such as brake cleaner.

The P21S Pressure Sprayer is a pump sprayer that allows you to apply P21S wheel cleaner from large refill containers. You build up pressure, press the trigger, and distribute the gel across the rim with a wide, even spray pattern. A locking button holds the trigger down for larger areas so your hand does not get tired.

• Wide spray pattern. The nozzle distributes the cleaner over a wide area rather than in a targeted stream. This allows you to coat spokes, the rim barrel, and the wheel face in just a few passes without having to wipe it down.
• Made for refill containers. P21S wheel cleaners are available as economical bulk containers without their own spray nozzle. With the pressure sprayer, you can apply them just as conveniently as you would from the small bottle.
• Locking button for continuous operation. If you are cleaning multiple wheels in one go, you can lock the trigger and work continuously. This saves effort and ensures a constant spray stream.

Practical tip from Detailing1: Only fill the sprayer with P21S wheel cleaner and never with brake cleaner, petroleum spirit, or similar solvents. These will damage the seals and cause the sprayer to leak. If you use the sprayer for other purposes, you will quickly ruin it. Rinse it with clear water after use to keep the nozzle clear.

Application

Fill the container with cleaner, close it tightly, and build up pressure with the pump. Then, spray the gel evenly onto the pre-cleaned, warm-to-cool wheel.

You can lock the trigger with the locking button to spray continuously. Let the cleaner dwell according to the product instructions, work it in with a brush if necessary, and rinse thoroughly. At Detailing1, we release the residual pressure after the last wheel and give the sprayer a quick rinse with water.

Limitations

The pressure sprayer is purely an accessory and does not contain any cleaner itself. It is explicitly not intended for solvent-based or aggressive products such as brake cleaner or petroleum spirit. For such agents, you need a chemical-resistant sprayer.

Target audience

Suitable for everyone who buys P21S wheel cleaner in refill containers and wants to apply it cleanly and quickly. If you only use small spray bottles anyway, you don't necessarily need it, but you will benefit from the even spray pattern.

How to use the P21S pressure sprayer

Fill only with P21S wheel cleaner, close the container tightly and build up pressure using the pump. Spray the gel evenly onto the pre-cleaned rim and, when working on multiple wheels, use the locking button for continuous spraying.

Allow the cleaner to take effect according to the product instructions, work it in with a brush if necessary, and rinse thoroughly. Never fill the sprayer with brake cleaner or other solvents.

After use, release any remaining pressure and rinse the sprayer through with clear water to keep the spray head clear.