Prelimpiador de GYEON

Contactless Pre-Wash and Snow Foam with GYEON Q²M Pre-Wash

What is GYEON Q²M Pre-Wash? GYEON Q²M Pre-Wash products are contactless pre-wash products for vehicle washing – sprayed on or applied with a foam cannon, they dissolve dirt, dust, and loose particles before hand washing to minimize the risk of wash marring during mechanical washing.

GYEON Q²M Pre-Wash products are the first and most crucial step in a professional washing workflow. Before the wash mitt touches the paint surface, coarse dirt, road dust, and sand must be loosened and removed without contact. Any contact between the mitt and a dirty surface without sufficient pre-washing is a potential micro-scratch. Q²M Pre-Wash and Snow Foam solve this problem: The formula is applied with a foam cannon or pressure sprayer, allowed to dwell briefly, and dissolves dirt particles without touching the surface. Then it is rinsed off – and only after that does the actual hand wash begin on a significantly cleaner surface.

• Contactless dirt elimination. Coarse dirt, sand, and road grime are loosened and rinsed off without mechanical contact – this is the most effective measure against wash marring.
• High foam adhesion for maximum dwell time. GYEON Snow Foam adheres to the paint surface as a dense foam, giving the cleaning agent time to swell dirt – before everything is rinsed off.
• Coating-compatible for coated vehicles. Q²M Pre-Wash products do not attack ceramic coatings and are safe for regular use on Q²-coated vehicles.

Practical tip from Detailing1: Always apply Snow Foam from bottom to top – this way it flows from top to bottom over the vehicle and has more contact time on the heavily soiled lower areas. Allow at least 3-5 minutes dwell time before rinsing; for very dirty vehicles up to 10 minutes, but never let it dry.

GYEON Q²M Pre-Wash and Snow Foam: Differences and Application

GYEON Q²M Pre-Wash is a spray pre-cleaner that can be sprayed directly onto the surface without a foam cannon – ideal for targeted pre-treatment of heavily soiled areas. The Snow Foam is applied with a foam cannon on a pressure washer and covers the entire vehicle with a dense foam – for complete contactless pre-washing. Both products complement each other: Pre-Wash directly on sills, wheel arches, and grilles as a first treatment, then Snow Foam for overall coverage. After rinsing, hand washing follows with Q²M Shampoo and the Q²M Wash Mitt.

Buy GYEON Pre-Wash at Detailing1

At Detailing1 you will find all GYEON Q²M Pre-Wash and Snow Foam products as part of the Q²M Maintenance Line – for a professional start to any washing workflow.