Sellante para Llantas, Neumáticos & Plásticos de GYEON

Ceramic Protection for Rims, Tires, and Plastic with GYEON Q²

What are GYEON rim, tire, and plastic sealants? These specialized Q² coatings protect aluminum rims, tires, and plastic parts from brake dust, UV fading, and dirt adhesion – with adapted formulations for the specific requirements of these surfaces.

Rims, tires, and plastic parts on a vehicle are exposed to particular stresses: rims are affected by brake dust deposits, heat from the brakes, and aggressive cleaning agents; tires are exposed to UV radiation and ozone; plastic parts (bumpers, mirror caps, trim strips) tend to suffer from UV graying and dirt accumulation. GYEON has developed specialized Q² formulations for each of these areas, tailored to the chemical and thermal requirements of these surfaces – not a compromise product, but substrate-specific protection.

• Thermally resistant rim coating. GYEON rim coatings are designed for the heat from the braking system. Brake dust particles adhere significantly less to coated rims – making every cleaning easier and protecting the rim surface.
• UV protection and deep effect for plastic. Plastic and rubber surfaces benefit from a specialized coating that counteracts UV-induced fading and graying and gives the plastic a uniform, rich appearance – without excessive high gloss.
• Complete protection concept for exterior and interior. Combined with paint sealant and glass sealant, a consistent protection concept for all exterior surfaces of the vehicle is created.

Practical tip from Detailing1: Always thoroughly decontaminate rims before coating – brake dust, rust film, and old care product residues must be completely removed. An acidic rim cleaner followed by an alkaline cleaner before the IPA wipe is the most reliable method. Then, coat the rims with as little heat stress as possible – i.e., after a longer standing time, not directly after a drive.

GYEON Q² Rim Coat: Rim Coating for Brake Dust and Heat

The GYEON Q² Rim Coat is specially formulated for the demands on alloy wheels – with increased temperature resistance and a protective matrix that offers less adhesion for brake dust particles. In practice, this means: Less dirt buildup after every drive, easier and lower-risk rim cleaning, and a permanently cleaner appearance. Application is similar to paint applications – clean, degreased rim, thin coating application, defined flash-off window, careful wiping. Especially with contoured spoke designs, careful application is crucial to avoid over-application in depressions.

Plastic Sealant and UV Protection for Exterior Plastics

Black and gray plastic parts – bumpers, mirror housings, sills, and trim strips – gray over time due to UV radiation and oxidize. A special plastic sealant from the GYEON Q² line restores the plastic to its original condition and protects it long-term from further UV attack. Unlike standard plastic care products that only temporarily color, a ceramic coating on plastic forms a more durable protective layer. For plastic parts in the interior, we recommend the Q²M Interior products from the Maintenance line.

Rim Sealant and Plastic Care Compared to Conventional Products

Conventional rim polishes and plastic care products offer short-term protection and cosmetic improvements – but no permanent protective layer. GYEON Q² specialized sealants offer significantly longer durability and stronger protection due to chemical bonding with the substrate. This applies particularly to rims: A vehicle regularly treated with tire shine or rim polish often needs care again after every wash. A ceramic coating, once applied, on the other hand, lasts significantly longer and measurably reduces maintenance effort.

Buy GYEON Rim and Plastic Sealant

At Detailing1, you will find the specialized Q² sealants for rims, tires, and plastic – together with the suitable surface preparation from the Q²M Maintenance rim care line. For a complete exterior protection concept, combine the rim sealant with the Q² paint coating and the Q² glass sealant.