GYEON Q²M "PPF" Wash car shampoo for paint protection film 500ml

The right shampoo for PPF-protected cars – GYEON Q²M PPF Wash

What is GYEON Q²M PPF Wash? GYEON Q²M PPF Wash is a car shampoo built specifically for cars wearing paint protection film – pH-neutral, free of waxes and harsh surfactants that could damage PPF or the ceramic coatings laid on top of it.

Washing a car with paint protection film takes more care than washing bare paint. Plenty of standard car shampoos carry alkaline surfactants, waxes or other additives that can damage PPF, swell it, or degrade the coatings sitting on top. GYEON Q²M PPF Wash closes that gap: a PPF-safe car shampoo that cleans thoroughly without attacking the film or its protective layer – the right call for every wash on a filmed car.

• pH-neutral and free of anything that hurts PPF. Q²M PPF Wash carries no waxes (they bond unevenly on film), no aggressive alkaline surfactants (they roughen PPF surfaces) and no silicone gloss enhancers (they mess with coating adhesion). Clean cleaning, no risks.
• Keeps your PPF coatings working. If you have laid Q² PPF EVO or Q²M PPF Maintain on the film, Q²M PPF Wash protects those layers through the wash. The shampoo cleans the surface without knocking back beading or coating bond.
• Plenty of foam for a safe, gentle hand wash. Foam matters more on PPF than anywhere else – it cushions the contact between wash mitt and film and takes the scratch risk out of the job. Q²M PPF Wash foams up rich and lets the mitt glide.

Day-to-day from Detailing1: For the best PPF wash: pre-wash first (pressure washer, or foam it down with Q²M Foam), then wash with Q²M PPF Wash by hand with a soft wash mitt – never brushes, never sponges. Rinse Q²M PPF Wash off properly afterwards and dry the car straight away – hard-water spots can mark PPF for good.

Why a PPF car should not be washed with just any shampoo

Lots of owners run the same shampoo on a filmed car as on bare paint – and gamble with the life of an expensive film. Alkaline shampoos (pH > 8) roughen PPF surfaces, so dirt sticks harder and the film hazes over sooner. Wax-loaded shampoos leave patchy residue on film and drag the beading down. Shampoos with harsh surfactants degrade PPF coatings and cut their durability badly. GYEON Q²M PPF Wash has none of these problems.

How to use Q²M PPF Wash properly

Add Q²M PPF Wash to a bucket of water (dosage: about 30–50 ml per 10 litres) and let it foam up well. Pre-clean the car with a pressure washer first, or foam it with Q²M Foam – that step pulls the heavy grit off before the shampoo goes anywhere near the film. Dip a wash mitt (not a sponge!) into the foam and work in straight, overlapping passes – no circular motions, they leave marks on PPF. Rinse thoroughly and dry with a soft, thirsty drying towel or a chamois. For the best finish, lay Q²M PPF Maintain down as a spray sealant after the wash.

Q²M PPF Wash across different PPF builds

Q²M PPF Wash suits every car running PPF – from partial coverage (bonnet, bumpers) to a full wrap. It is just as happy on cars carrying ceramic coatings on top of the film or on the paint. On cars without PPF we would point you at the regular Q²M Bathe or Q²M Bathe+, which bring extra care ingredients and are tuned for bare paint.

PPF Wash in the full GYEON PPF care system

Q²M PPF Wash is step one of the GYEON PPF routine: PPF Wash for the regular wash → Q²M PPF Maintain to top the sealant up after washing → Q²M PPF Renew when scratches or haze show up → Q² PPF EVO as long-term ceramic protection. Everything in the line is matched and works together.

Buying advice: the shampoo for every PPF owner

GYEON Q²M PPF Wash is not an optional extra – it is the default shampoo for anyone running a car with paint protection film. The money you put into quality film only pays off long term if the car gets the right products on it afterwards. Q²M PPF Wash is affordable, seriously effective and keeps the film and everything coated on top of it safe.