Koch-Chemie × COLOURLOCK COLOURLOCK "Fluid Leather" (Citroën) — Vernice Riparazione Pelle per Citroën 20ml

COLOURLOCK Fluid Leather for Citroën: precise spot repair in a 20-ml tube

What is COLOURLOCK Fluid Leather for Citroën? — The highly pigmented repair dye in a 20-ml tube is ideal for precise damage repair on Citroën leather — without complex spray equipment.

COLOURLOCK Fluid Leather (Citroën) is a liquid, highly pigmented leather repair dye in a 20-ml tube — specially developed for the precise repair of small damaged areas such as cracks, scratches, and color abrasion on Citroën leather interiors. The color is based on original Citroën color samples and can be applied precisely with a brush or sponge.

• 20 ml tube for spot repairs – Precisely dispensable, no spray equipment needed.
• Original Citroën colors – Factory-accurate pigmentation for invisible repairs.
• High opacity – One application is usually enough — even on dark leathers.

💡 Detailing1-Workshop practical tip: We use Fluid Leather (Citroën) in the workshop for steering wheel repairs — classic 12 o'clock abrasion. One tube is enough for 5–8 steering wheel repairs. Use a brush with soft bristles, dab on criss-cross, dry for 30 min between layers, apply Top Coat Dull — the result is indistinguishable from new.

Degrease the damaged area, dab on precisely, seal with Top Coat

Fluid Leather (Citroën) is applied directly from the 20-ml tube onto a soft brush or sponge and dabbed onto the repair area criss-cross in 1–2 thin layers. Allow 20–30 minutes to dry in between, then seal with Top Coat at the end.

Before repair, the damaged area is cleaned with leather cleaner and degreased with Plastic Cleaner or rubbing alcohol. Deeper cracks are pre-filled with Filler or Super Filler and sanded smooth with 1000-grit sanding fleece. The highly pigmented Fluid Leather (Citroën) solution is then precisely dabbed onto the prepared area — criss-cross in thin layers is more opaque than a thick application.

After complete drying of about 4 hours, it is sealed with Top Coat Dull or Glossy to make the repair abrasion-resistant. A 20-ml tube is sufficient for 5–8 steering wheel repairs or about 15 spot crack repairs. Workshop costs per repair are around 10 Euros, a complete steering wheel restoration takes approx. 3 hours including drying time.

Spot repair yes, large areas no

Fluid Leather (Citroën) is the special solution for spot repairs — individual cracks, scratches, or minor abrasions up to approximately 5x5 cm. Large-area repairs require Leather Colour in 250-ml or 1-liter containers.

The high pigmentation and tube form make Fluid Leather extremely economical and precise — even on dark leathers, one layer is often enough for full coverage. However, for repairs over 5x5 cm or entire seat bolsters, the tube content would not be sufficient, and dabbing by hand would be uneconomical. Suede and velour surfaces require Nubuk Fresh (Citroën) anyway, as Fluid Leather would stick the rough texture.

If only 12 o'clock steering wheel abrasion or individual cracks are to be repaired, Fluid Leather is the most economical and precise choice. If entire seat groups, steering wheels, or door panels are to be restored, it is worth switching to Leather Colour (Citroën) or the Complete Repair Set (Citroën) with all components.

For detailers with individual damaged areas

Fluid Leather (Citroën) is the workshop solution for targeted spot repairs — for detailers, independent workshops, and ambitious owners who want to precisely repair steering wheel abrasion or individual cracks.

In used car detailing, 12 o'clock steering wheel abrasion is a classic. A tube of Fluid Leather costs about 67 Euros and is enough for 5–8 steering wheel repairs — per repair, that's material costs of around 10 Euros. With a brush and Top Coat, the total repair effort per steering wheel is 3 hours including drying. The result is indistinguishable from a new steering wheel after 2 weeks of use.

For pure care without damage, Fluid Leather is the wrong approach — Leather Fresh (Citroën) is sufficient there. For entire seat bolsters or entire components, it's worth switching to Leather Colour. However, if you want to precisely repair individual damaged areas with OEM color accuracy, the 20-ml tube is the most economical and precise tool from the COLOURLOCK range.

Available Citroën Colors (Selection)

Terre De Cassel, Alezan / Fuchsbraun, Lama, Mistral

Care instructions for leather repair dye (Citroën):

Fluid Leather (Citroën) is the special solution for spot repairs — individual cracks, scratches or minor scuff marks up to approximately 5x5 cm. Large-scale repairs require Leather Colour in 250 ml or 1-liter containers.

The high pigmentation and tube format make Fluid Leather extremely economical and precise — even on dark leathers, one layer is often enough for full coverage. However, for repairs over 5x5 cm or entire seat bolsters, the tube content would not be sufficient, and dabbing by hand would be uneconomical. Suede and velour surfaces require Nubuk Fresh (Citroën) anyway, as Fluid Leather would glue the rough texture.

If only 12 o'clock steering wheel abrasion or individual cracks are to be repaired, Fluid Leather is the most economical and precise choice. If entire seat groups, steering wheels or door panels are to be restored, it is worth switching to Leather Colour (Citroën) or the Complete Repair Set (Citroën) with all components.