GYEON Q²M "PPF" Lift Slip Solution for Paint Protection Film 500ml

Clean PPF installs without scratches – GYEON Q²M PPF Lift

What is GYEON Q²M PPF Lift? GYEON Q²M PPF Lift is a dedicated slip solution for applying paint protection film (PPF) – it keeps the film from grabbing too early during positioning, so you get a precise install with no wrinkles and no trapped air.

Anyone who's tried to lay down paint protection film without the right slip solution knows the pain: put it down wrong once and the film grabs instantly, and you can barely reposition it. GYEON Q²M PPF Lift stops exactly that. This purpose-built slip solution keeps the film mobile while you position it, gives you the time to line things up properly, and sets up the ideal base for a professional, flawless PPF install.

• Great slip with no residue under the film. Q²M PPF Lift is formulated so nothing gets left behind between film and paint that could cause bubbles or hazing after the install. It flashes off clean and leaves a tight bond between film and paint surface.
• Longer positioning window for precise work. The formula keeps the film moving longer than plain water – a real help on large film panels or tricky body sections where getting the position spot-on takes a few minutes.
• Works with every common PPF product. Q²M PPF Lift suits all types of paint protection film (TPU and PU) – self-healing and standard films both benefit from the extra slip during the install.

Detailing1's tip from the shop: Spray Q²M PPF Lift generously onto the paint surface and the film side with a spray bottle. The film then slides in any direction you need. Only once the position is right, work a squeegee from the middle outwards and push the Lift out – that's when the permanent bond kicks in. For the rinse after the install and the first wash, we recommend GYEON Q²M PPF Wash.

Why a dedicated PPF slip solution makes all the difference

How well a PPF install turns out comes down in large part to the slip solution. Plain water flashes off too fast and leaves you too little time to position accurately – especially on big panels. Soapy water, on the other hand, can leave residue and interact with the film's adhesive layer. GYEON Q²M PPF Lift is formulated for exactly this job: the slip-agent concentration is dialled in so the film stays mobile for a long time without hurting the final bond. What you get is a clean, air-free connection between film and paint – the base for a PPF that keeps protecting perfectly for years.

How to use it: PPF Lift in professional film fitting

Before you start, clean and degrease the paint surface thoroughly – perfectly clean paint is the single most important thing for reliable PPF adhesion. Spray GYEON Q²M PPF Lift onto the paint surface and the film's adhesive layer. Position the film and work a squeegee from the middle outwards – keep the pressure even to push out all the Lift fluid and air. Trim any overhanging film edges cleanly with a knife. Don't rinse the film with water straight after the install – wait until it has fully cured (24–48 hours), then do the first wash with Q²M PPF Wash.

PPF Lift for different install situations

GYEON Q²M PPF Lift works across the whole PPF job: bonnet, bumpers, mirrors, door edges and full-body wraps. On curved or complex surfaces, plenty of Lift fluid matters even more – it lets you stretch and shape the film without it wrinkling. For corners and edges we also recommend the Q²M PPF Slip as an edge-lock solution that lets you set the edges precisely. The full GYEON PPF system – Lift, Slip, Wash, Maintain – is built to work together for the best results.

Q²M PPF Lift vs. water: the difference day-to-day

A lot of installers use water or soapy water as a slip solution – it works, but not brilliantly. Water flashes off fast and gives you little room to work; soapy water can leave residue. Q²M PPF Lift gives you a much longer slip window, leaves no residue and is matched to the chemistry of PPF adhesive layers. The result: less rework, fewer botched installs, more professional results. For anyone new to PPF work especially, Q²M PPF Lift is a real gamechanger.

Our take: Q²M PPF Lift for professional PPF installs

GYEON Q²M PPF Lift is a must-have for anyone installing PPF themselves or offering it as a service. The slip solution pays for itself right away through fewer botched installs, less wasted film and more professional results. As a complete PPF system we recommend: Q²M PPF Lift + Q²M PPF Slip for the install, Q²M PPF Wash for ongoing care, Q²M PPF Maintain to refresh the seal, and as a coating on top Q² PPF EVO for lasting ceramic protection.